Arburg 170 CMD-150-45

ARBURG

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Ljdpfx Asz Aty Hekqehn Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Ljdpfx Akofv Awasqjhn Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: repair required (used), Year of construction: 2019, operating hours: 14,967 h, functionality: not functional, machine/vehicle number: 750090, total height: 1,885 mm, total width: 800 mm, total length: 1,240 mm, We are offering this Arburg freeformer 200-3X machine for processing thermosetting plastics, year of manufacture 2019, which requires repair. Description of fault: Extrusion unit 1 is functioning correctly. Extrusion unit 2 is defective (the Arburg service technician suspects a problem with the piezo element or piezo driver). The machine had problems starting up. However, after repeated restarts, it is now functional. Manufacturer: Arburg Model: freeformer 200-3X with dual material preparation Ledpfx As Adprlekqshn Year of manufacture: 2019 Condition: in need of repair Category ID: 1208 Type ID: 1354 Machine type: Machine for thermosetting plastics Machine number: 750090 Air heat exchanger for active machine temperature control Build chamber heating up to 120°C and temperature control for plasticization up to 300°C Equipment for inline material drying for material preparation 1 and 2 Data preparation software (slicer) incl. license If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm Lhsdsxl Hpgspfx Akqon • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW

Condition: used, Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Lhodpfx Aolawp Sskqen Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Condition: used, Arburg Type: Arburg Freeformer 300-3X PC has been renewed and upgraded Additive manufacturing of complex functional components With high-temperature option The new, larger Freeformer 300-3X processes three components in ARBURG Kunststoff-Freiformen (AKF) and, for the first time worldwide, enables the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation 300 indicates the available component carrier area in square centimeters. The build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters compared to the Freeformer 200-3X. "3X" indicates the three axes of the component carrier that can move in the x, y, and z directions. For Additive Manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Lhedpfjzd Tiwjx Akqsn

Condition: good (used), Year of construction: 2000, Arburg 420C-800-250 Clamping force: 80 tons Year of manufacture: 2000 Screw diameter: 40 mm Injection volume: 188 cm3 Nozzle spacing: 42x42 Lhsdpfx Aj Acb Tfjkqen Operating hours: 32,518

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. Lhjdpsfvztusfx Akqon Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg. This riveting machine can be used for movable and immovable riveted connections. The cost of the riveting machine does not include the cost of punches and shipping costs.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call. Ljdpsyrczgsfx Akqshn

Condition: excellent (used), Year of construction: 2017, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 55 mm Shot weight: 510 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Platen size: 1040x1040 mm Shot volume: 558 cm3 Lsdpfx Akez R Rggeqjhn Mould min: 400 mm Type: Horizontal Drive: Hydraulic 2 core pullers Linear robot Tecnomatic compact conveyor

Condition: excellent (used), Year of construction: 2006, Dryer MORETTO D3 T Year 2006 30 LT Lodpfewq Ertox Akqshn

Condition: excellent (used), Year of construction: 2016, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 60 mm Shot weight: 510g/PS Lodpjz R Rfvsfx Akqehn Min Mould: 400mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hydraulic 2 hydraulic Cores Arburg Robot Multilift Conveyor

Condition: used, Year of construction: 2008, Arburg 320C 500-100 (2008) Lhedpfx Aez R N T Ejkqen Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l

Condition: excellent (used), Year of construction: 2004, Dryer Wittmann Drymax C30-30-P Lsdpsumnknefx Akqjhn Year 2004 Conveyor units year 2005 2 pieces available

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo Lhsdpfxeyl Syre Akqen possibly available at an extra charge.