Arburg 370S-800-150

ARBURG

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Hodpfx Asyya Injb Usk Working hours: 53.212 h Type: Horizontal Drive: Hydraulic

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. Hsdpfx Abefyiqbe Ujk The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Hodpfoyx D Ngex Ab Uok Full technical specifications in the attached document Clamping force: 1300 kN Opening force: 35/350 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Tie bar spacing: 420 x 420 mm Ejector force: 40 kN Ejector stroke: 175 mm Screw stroke: 145 mm Screw diameter: 35 / 40 / 45 mm Injection pressure: 2500 / 2120 / 1670 bar

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Hsdpfsyx D Aysx Ab Uek Full technical specifications in the attached document. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO year 1997 Scrow 25 mm Hjdpjg S I S Aefx Ab Ujk tie bar spacing 27x27

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale: Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and immediately ready for operation. Technical specifications: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 cm³ shot volume/capacity Total machine weight: 14,000 kg Operating voltage: 400 V (3~ AC) Frequency: 50 Hz Hedpfeyx Daxex Ab Uek Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an Arburg injection moulding machine, model 370 C 800-100. Technical Data: Year of manufacture: 2007 Injection unit unfortunately not included Clamping force: 800 kN Clearance between tie bars: 370 x 370 mm Max. platen distance: 750 mm Mould installation height: 250 mm Injection unit: 100 Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Hjdpfx Absyxqiyo Ujk Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional You are welcome to view this (and other) extruders Hodpfepy Eygex Ab Uok at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: good (used), Year of construction: 1998, clamping force: 500 kN, For sale is an Arburg 320 S 500-150 injection moulding machine. The item is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine number (Serial number): 174967 Year of manufacture: 1998 Clamping force: 500 Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 2,250 Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 Transport and loading can be organised throughout Europe upon request and for an additional charge. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? Hjdsyxp Eaepfx Ab Ujk For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Hsdeyk Tlaspfx Ab Ujk Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm Hodpfx Abovuun Te Uok power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, For sale is an Arburg 220 S 150-60 183385. The machine is in good condition and fully operational. Technical specifications: Clamping force: 150 kN Opening stroke: 275 mm Mold installation height: 150 mm Clear tie bar distance: 221 x 221 mm Injection unit: 60 Hsdjyxnmpopfx Ab Uek Screw diameter: 18 mm Calculated shot volume: 20 cm³ Shot weight: 18 g/PS Injection pressure: 2,500 bar Injection rate: 32 cm³ Net weight: 1,900 kg Pump hours: 94,830 h Automatic operation hours: 85,152 h The offer refers exclusively to the machine without mold/tools; these can be negotiated separately. Transport and loading can be organized across Europe at additional cost upon request. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, operating hours: 81,912 h, functionality: fully functional, machine/vehicle number: 202150, clamping force: 180 kN, For sale is an Arburg injection molding machine, model 170U 180-70. The machine is fully functional and ready for immediate use. Hedpsyxm Thjfx Ab Usk Technical data: Year of manufacture: 2006 Operating hours: 81,912 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Transport and loading can be arranged Europe-wide at additional cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you wish to sell your own? For further information or contact options, please visit our website.

Condition: ready for operation (used), Used Machine Injection Moulding Machine Hedpfx Abou Ti Srs Uok Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: Hjdpfx Abjyxdwdo Uek • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface