BIESSE ROVER A 1232

BIESSE ROVER A 1232

Condition: new, Year of construction: 2024, CASOLIN electronic squaring machine mod. ASTRA 400 5CNC brand new 5 controlled axes version roller carriage mm. 3200 width mm. 360 parallel guide with controlled axis positioning - max opening mm. 1300 telescopic flag with linear guide blade motor HP 7.5 with automatic star/delta starting saw speed rpm 3200/4200/5000 cross slide with tilting register Ksdpeu At Sdefx Ahysdg controlled axis blade lifting and tilting motorized engraver two-axis control max. blade diameter mm. 400 parallelogram blade protection Processing materials: wood, plastics, special materials

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Kdodpfjwb Alljx Ahyjg Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: used, The Weinig Unimat 23EL planer and moulder is designed for four-sided planing and profiling of wood, featuring a mobile spindle for automatic adjustment, a grooved bed for short and curved workpieces, and a long planing table. spindles: 10 spindle 1: Bottom / 5.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / Motor together with spindle 2 / 40 mm spindle 4: Right / 11 kW / 40 mm spindle 5: Left / 5.5 kW / 40 mm spindle 6: Top / 11 kW / 40 mm spindle 7: Bottom / 11 kW / 40 mm spindle 8: Top / 7.5 kW / 40 mm spindle 9: Bottom / 7.5 kW / 40 mm Spindle 10: Universal / 4 kW / 40 mm Kdodpfx Aew H Iv Tehysg working width: 230 mm working height: 160 mm feed: 5.5 kW / 6 - 36 m/min

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Kdedpfx Aewt Snyohyog

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Kdsdpowgb Hxefx Ahyjg Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Ksdpfxswvq Hge Ahyedg Operating Units: 8 nr

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Kdjdpfx Ahsxxlqvsyeg Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Kdsdpfxsuaz H Ie Ahyjg Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: used, Year of construction: 2014, Empty weight: 4.000 kg Price: On request Kedpfx Asxr Evljhyjdg - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Kdsdpfsxranpsx Ahyjg Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control