Conventional lathe

CONTUR SJ-860/3300 XL

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg Fodpfx Ahjwvl Ewo Uepp connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Chip conveyor - Laser light for cutting line display - Micro-dosing device - Powered chip brush - Clamping pressure regulation in the control panel - Fully automatic sawing process after entering the length and number of pieces - Operating instructions Operating hours: 3480

Condition: good (used), swing diameter over cross slide: 260 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 1,800 rpm, distance between centers: 1,650 mm, Brand: Pinacho Model: L1-225 Distance between centers: 1,650 mm Diameter on bed: 440 mm Diameter on carriage: 260 mm Diameter of the spindle without neck: 640 mm Neck length: 160 mm Shank pitch: 52 mm Turning speeds: 30-1,800 rpm Motor power: 5.5 HP 4-point Morse taper Lower pedal brake Includes: - Closed steady rest - "Mecanizados Huesca MH115" quick-change turret with 2 tool holders - Swivel center - 250 mm 3-jaw chuck with various sets of jaws - Includes all the tools in the photographs and micrometers *Includes a chuck guard with a micrometer Fpodpswlhzasfx Ah Usp

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders Fodpevta Rdjfx Ah Uopp - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: new, Year of construction: 2025, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,200 mm, feed length X-axis: 4,700 mm, feed length Z-axis: 2,000 mm, faceplate diameter: 4,000 mm, feed rate X-axis: 25 m/min, feed rate Z-axis: 15 m/min, rotary table diameter: 4,000 mm, rotational speed (max.): 100 rpm, torque: 128,000 Nm, spindle speed (min.): 3,000 rpm, table load: 50,000 kg, power: 100 kW (135.96 HP), Equipment: rotational speed infinitely variable, TECHNICAL DATA: Machining diameter 4200 mm Max. workpiece height 3000 mm Max. workpiece weight 50,000 kg Faceplate diameter 4000 mm Faceplate speed range 0-30/0-100 rpm Max. faceplate torque 128,000 Nm Main drive power 75/90 kW EQUIPMENT: -1-2 support configuration -Machine enclosure -Chip conveyor -Cooling water preparation -C-axis -Fork head -Driven tools/BT50 -Bellows cover -Central lubrication SKF/VOGEL -12-month warranty -Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard CONTROL: FAGOR or SIEMENS Fodpfeq Ny Dtjx Ah Ujpp OTHER: Geometry acceptance according to DIN 8609-3

Year of construction: 2021, condition: refurbished (used), Refurbished DIAFORM unit f. JUNG HF50 / JF 520 Fpedpfx Ahshcn R Ij Uep

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm Fpjdpjfu Nbbjfx Ah Uop total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: excellent (used), Year of construction: 2012, Cutting range round: max. 530 mm Cutting range square: max. 530 x 520 mm Fpsdpfswvtckex Ah Usp Saw band dimensions: 7,000 x 54 x 1.6 mm Cutting speed: 10 - 110 m/min Drive power: 7.5 kW Weight: approx. 4.5 tons

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Condition of machine bed: very good condition -Machine bed: hardened -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools see photos Fsdpfx Aowfpiloh Uspp -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: used, Year of construction: 2017, x-travel 6.000 mm y-travel 3.500 mm z-travel 1.500 mm Control iTNC 530 HSCI Heidenhain Fpedpfxev N N R Ee Ah Usp Max. Speed 15.000 min/-1 power capacity - main spindel 63 kW max. Torque 300 Nm swivellable A: 220° (+/- 110) ° rotatable C: 550° (+/- 275) ° tool taper HSK 100A DIN 69893 1+2 table surface area 6.000 x 3.500 mm max. workpiece length 4.940 mm max. workpiece width 2.440 mm max. workpiece height 970 mm number of toolpositions 26 pos. tool taper HSK 100A max. tool length 400 mm max. tool diameter 130 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 65 m/min feed speeds 65.000 mm/min total power requirement 150 kW weight of the machine ca. ~ 130,00 t dimensions of the machine ca. 11,0 x 10,0 x 7,0 m CNC-Gantry Milling Machine FOOKE - Endura 908 linear - Fork-Turn-Swivel-Milling Head Type 8 (A+C Axis) - 5-Axis- and 5-Side-HSC-Machining (simultaneous) - High Dynamic - Construction - Setup with FOOKE possible as an option

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment Fedpfxsqrqvhs Ah Uspp - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox