Spot welding gun

DALEX 3346 EH

Condition: excellent (used), High performance spot welding gun with double stroke cylinder Make DALEX Type 3528 - 4 Rated power at 50 % ED: 63 kVA Sec. short-circuit current: 31 kA Electrode force: 60-730 daN Double stroke cylinder Long stroke 62 mm Pre-stroke 40 mm working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and suspension bracket 10 m connection cable with control line arm reach; 170 mm' arm distance: 170 mm cpl. with 1 pair of electrode arms, top and bottom straight, 170 mm Synchronous welding control MPS 1036 Dusdpfjki Tkpjx Anwjt Example photo

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. Dusdpfx Aeu Idfrjnwot operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: new, Year of construction: 2025, Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm; label width (backing paper width): 10-150mm; bottle diameter25-130mm; inner diameter of the label roll: 76mm; max. outer diameter of the label roll: 300mm; label precision: ± 1mm; production capacity: max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 50Hz/60Hz. Dsdpfx Anev Nk Sdswout Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, - Capacity 1.2 mm - With 8 roller sets - Foot control Dsdpfoucq D Ijx Anweut - Brake motor - Emergency stop - 400V

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min Duodpfxeu Nv Eas Anwst weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Make: DALEX Model: 3328-6 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.5 kA Secondary open-circuit voltage: 4.75 V Electrode force: 600 daN Special version with arm spacing: 248 mm With double-stroke cylinder – long stroke 51 mm – pre-stroke 33 mm – working stroke 0–18 mm with stroke adjustment With cardan suspension and suspension bracket Connection cable: 10 m Throat depth: 350 mm Dodpfxovurw Eo Anwjut Synchronous welding controller MPS 1536

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 10,887 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in) • Spindle • Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf) • Drive system: Inline direct-drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max weight on table: 1814 kg (4000 lb) • Feedrates and thrust • Max cutting feedrate: 12.7 m/min (500 ipm) • Rapids (X/Y/Z): 15.2 m/min (600 ipm) • Max thrust X: 15,124 N (3400 lbf) • Max thrust Y: 18,238 N (4100 lbf) • Max thrust Z: 24,910 N (5600 lbf) • Tool changer • Type: SMTC (side-mount) • Capacity: 30+1 • Max tool diameter (full): 64 mm (2.5 in) • Max tool diameter (adjacent empty): 127 mm (5.0 in) • Max tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Utilities • Coolant capacity: 360 L (95 gal) • Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi) • Minimum air pressure: 5.5 bar (80 psi) • Electrical Duedpfx Ajyt Riuenwst • Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A • Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2018, operating hours: 11,010 h, functionality: fully functional, machine/vehicle number: 0696, travel distance X-axis: 900 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain, table load: 400 kg, rotary table diameter: 520 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 11,010 h, spindle motor power: 35 W, input voltage: 230 V, KOVOSVIT MAS MCV 1000 5AX (S) CNC Machining Centre We are selling the machine as we need to free up space in the factory. Vertical 5-axis simultaneous machining centre. High precision for complex parts and 3D machining. Tilting/rotary table enables complete machining in a single setup. High-speed spindle for efficient production. Dodpfx Anoyt Nw Rsweut Heidenhain CNC control, ideal for precision work.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment Duedpfx Ansyaiq Dewet • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Year of construction: 1998, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 9,500 kg, total height: 2,760 mm, spindle motor power: 29,000 W, product length (max.): 6,600 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 3, This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. • Table dimensions: 2,500 × 700 mm • T-slots: 5 • T-slot width: 22 mm • Head type: Universal manual U22 (dual orientation) • Indexing: Manual in 2 planes Dusdpfx Aox D D Nzsnwot • Tool clamping: Hydraulic • Feed rates: • Working feed (X/Y/Z): 5 – 5,000 mm/min • Rapid traverse (X/Y/Z): 12,000 mm/min Technical Specification Taper Size ISO 50