Spot welding machine

DALEX PMS 10-4/T

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler Pjdpfjy Ehrfex Abzegn table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Podog Rn Efepfx Abzogn Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Pjdpfx Abjtqwrvjzegn Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity: 700 x 4 mm - Conical rollers Pgsdpfx Ajh Raytjbzen - Removable top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, Power at 50%: 20kVA Short-circuit current: 15kA Electrode force: 420daN Throat depth: 130-500mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - double foot pedal "currentless contact" Pedpewfxw Esfx Abzjgn --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: Pjdpfety Swyex Abzogn 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Psdpfxexacfto Abzjgn Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, functionality: fully functional, working width: 850 mm, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, noise level: 71 dB, battery capacity: 120 Ah, rotational speed (min.): 600 rpm, rotational speed (max.): 1,300 rpm, B 60 W BP DOSE (ROLLER) Walk-behind scrubber-dryer The B 60 W Bp Dose walk-behind scrubber-dryer is equipped with a drive motor, two maintenance-free 120 Ah batteries, and a user-friendly key system. This system enables simple and safe operation by controlling access and operating rights to protect against incorrect operation. The machine is ideal for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, battery life is significantly extended, and the integrated tank rinsing system makes it easy to clean the dirty water tank after floor cleaning. Walk-behind scrubber-dryer (60 l) with drive unit. Ideal for 1000 - 2500 m². Energy-saving eco! efficiency mode Proven double disc technology ■ Brush heads can be quickly installed or replaced. Powerful drive motor ■ Comfortable driving with infinitely variable speed adjustment (forward and reverse). ■ Preset maximum speed. ■ Operation via drive levers directly on the handle. With cleaning agent dosing system. ■ With on-board cleaning agent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width vacuuming mm 850 Fresh/dirty water tank l 60 / 60 Brush speed rpm 600 – 1300 Brush contact pressure kg 37 Battery Ah 120 Pgodox Hvvzjpfx Abzen Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive traction motor Mains connection charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, images may vary as there are multiple items available Quantity 1x Kärcher walk-behind scrubber-dryer B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and mileage or operating hours. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more cleaning machines – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment Pedsy T R Ryjpfx Abzjgn • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2016, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA -Arm length: 550 mm, adjustable length -Operation: via foot pedal Podpfx Aeyvz Insbzogn -Dimensions: 1050/330/H1270 mm -Weight: 152 kg