CNC Press Brake

Darley MF 2502

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Cgedou Ti Srepfx Ab Usr Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Cedpfx Aborq D Nis Usgr The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. Cgedpfx Asww Eqcob Ujr - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1969, Pneumatic gluing press, pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, Ceded Dxqbopfx Ab Ujgr two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Codpfeuiykdjx Ab Usgr

Condition: new, MVD Electric Bending Press Mod. S40. Useful length of bending : mm 1250. Power exerted : Ton 40 Numerical Control : ESA S630 Controlled axes No. 4 ( Y1-Y2-X-R) Max. stroke Y axis : mm 310 Internal clearance : mm 500 Cedpfx Asrp E A Tsb Ujgr Rear register stroke : mm 750 Main motor power : 2 x 4.3 Kw UNIMEC rear register ( Made in Italy ) Optical scales GIVI MISURE ( Made in Italy ) Couplings with quick release type PROMECAM Faster Shorter bending processes Excellent plating results Lower maintenance and production costs Quiet Less energy consumption

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Cgsdpfjvf Ixyox Ab Uer

Condition: good (used), Year of construction: 1990, For sale: forklift Clark C500 Y 130 PD The forklift has been in continuous use at our company – although only occasionally for handling heavier loads. We have been using it in our company for 7 years. It is in good condition. We are selling it because we want to purchase a model with a higher lifting capacity (10 tons). Cgjdeu D D H Ijpfx Ab Ujr Technical Specifications: Model: Clark C500 Y 130 PD Year: 1990 Maximum lifting height: 535 cm Minimum total height: 370 cm Fork length: 155 cm Capacity: 6 tons (6000 kg) Total weight: approximately 8500 kg Transmission: hydrostatic (with multiple speeds to choose from) The price is €7950, but we will consider a better offer. Tags: forklift, Clark, Jungheinrich, Linde, OM, CAT, Cesab, Detas, Manitou, Still, Hyster.

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm distance between columns 2550 mm Cedpfxow Rf Hio Ab Uogr column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 15,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system Cedox Ewnpopfx Ab Uegr - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm