Center lathe

Dean Smith & Grace T25 x 72

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600mm digital reading Hodoxhck Sopfx Alron Complete machine with documentation, tool holders, change gears,...

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Hedpfxev N Di Ao Alron Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Hjdpfx Aoxyh Hvslrsn Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: excellent (used), Mostana 1M65 x 5000mm Centre Lathe Hsdpfxoxwkvhj Alrsn Year 1991 Serial Number 3892 Distance Between Centres 5000mm Swing Over Bed 1000mm 3 Point Steady Sliding Chuck Guard Tailstock Power feed to compound

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Hodpfx Alotylazjrsn Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Coolant system Enclosed guarding

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, Hjdpfx Aloucdt Asrsn 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm Hedpfx Aljwvir Ioren

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING Hjdpotvav Ijfx Alren

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Hjdpfxjq R Tnze Alrjn Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm Hedovdx I Aopfx Alrjn bore diameter 130 mm weight of the machine ca. 5,25 t required space / m