Rapid Radial Drilling Machine

Donau DR 23

Condition: ready for operation (used), Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible. Iodpfex Db U Uex Ahyoal

Condition: used, Cutter Manufacturer: Seydelmann Model: K 204 Ultra Iaedpfxotu I T Eo Ahyel Made of stainless steel Volume: 200 liters 2 knife speeds 2 bowl speeds 2 mixing speeds Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz

Condition: good (used), DONAU DR 23 – High-Speed Radial Drilling Machine - Drilling capacity / steel approx. 28 mm - Arm reach 700 mm - Morse taper MK3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900 kg Subject to errors and input mistakes Iodpfx Asxzqauohyoal

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Ijdoirax Ujpfx Ahysal -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Ijdpfx Aepugwiohysal The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2019, ROTOTHERM REC1280 Rotary Oven, Gas-Fired The Rototherm oven with a rotary rack is designed for baking: – bread – tin/toast bread – buns/rolls – small pastries Technical specifications: Rotary wheel diameter: 1260 mm Max tray size: 600 x 1000 mm Baking surface with 21 shelves: 12.6 m² Max rotary plate load: 350 kg Baking chamber height: 1830 mm Ijdpfx Aew Uih Sohyeal Max rack height: 1813 mm Minimum room height: 2830 mm Dimensions (W/D/H): 1740 x 1900 x 2400 mm Net weight: 2400 kg NAVIGO II control: yes The ROTOTHERM Green rotary oven by Werner & Pfleiderer is a new-generation rotary oven providing up to 25% energy savings compared to the standard RE oven. Recipes are protected by access codes. The system allows programming of up to 250 recipes with 20 steps each.

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Iaedpfx Aovvkdtohysl

Condition: used, machine/vehicle number: XLER6X2000510xxxx, mileage: 678,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20681 Specifications: Model year: 2004 Mileage: approx. 678,000 km Transmission: Manual Suspension: Full air Tires: See photos Length: 938 cm Width: 250 cm Wheelbase: 490 / 136 cm Curb weight: 10,100 kg Driveline: 6x2 Power: 420 hp Equipment: Tool compartment Tow hitch Bed Radio/CD Air conditioning / climate control Description:Scania R420 6x2 container truck, model year 2004.The truck starts and runs, but some repairs and investment will likely be required to pass EU roadworthiness inspection. Note: The container body is not included. Available for quick delivery upon agreement. Km: 678000 HK: 420 Iedpfx Ahjwqwmcjysal Technical approved: no EU-approved until: 12.07.2024 Own weight: 10100 Total Weight: 27000 Payload: 16825 Width: 250 Length: 938 Euro: 3 Model: R420 Gearbox: Manual

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m Iodpfx Ahjvx Uvxsyoal New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min Ijdpfow Rrhgex Ahysal total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.