Cnc lathe

Doosan Puma 4100A

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Fgsdsv E R Eispfx Agcsk Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore Fgedpfx Aowzh Eqegcsk 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Fodpfxev Rw Uue Agcegk Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: new, Year of construction: 2025, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm Fgedpfx Asiz Tczsgcok THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Fgjdpfx Ajhy Au Ijgcjk Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Fedpfx Agjg Tzbwocegk Electrical connection 400 V According to CE standard Weight 420 kg

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100 Fodpfjxrr I Ijx Agcjgk

Condition: ready for operation (used), Year of construction: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Fgsdpfx Agowm Nphocsk

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Fgodpfx Agsrt Ip Njcsk Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg Fedpfx Ajhvml Isgcjgk