PRESSBRAKE

ECLAIR AP 600

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Kjdpfxeu A U Uto Abgsdk

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Kodpotia Hhjfx Abgodk

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Ksdpfx Asg Dvfwobgedk Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Features:Included cap sorting as-is or adjusted to customer needs

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Kjdpfxjf Sqckj Abgodk Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Kdjdpfx Abexg Ivdogsk Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Kdedpfx Aotgpdzebgjk Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Anvil weight: 24 ton

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. Kedpfxeyqyfgj Abgodk *

Condition: used, Year of construction: 1988, Printing Machines two colors offset Kjdpfx Absx Tg Nlogsdk 52x72

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Control system brand: HACO - Control system type: BC59T Graphics - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Crowning system: CNC-controlled - Punch holder: Quick-release - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information Kdsdpfxoxrl Hdo Abgjk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM Kdjdpfjwb Scmox Abgek MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs