Measuring stop

Elumatec AMS 200

Condition: used, Automatic feed via Elgo control E 255 Pedeywxwpopfx Ab Uogi For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Pedpfxexabztj Ab Uegi Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. Pjdpfox E Ahzjx Ab Uegi 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Pedpfx Abjkckx Uo Usgi Total power requirement 3 kW Machine weight approx. 250 kg

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: Podpfx Absmb U Tus Uogi • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Pedpfswwlk Nex Ab Uogi

Condition: used, Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg Pjdpfx Absinwuqo Ujgi

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Pjdpfeycgtbox Ab Usgi Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Designed for bundle cutting of roller shutter slats, setwise cutting of roller shutter boxes, cutting of side rails and set cutting of monoblock roller shutter boxes. • Clean surface cutting thanks to high saw speed • Roller conveyor system, right and left 3 meters each, 2 units • Saw cutting speed is adjustable • All roller shutter boxes up to a maximum of 350 mm can be cut • Precise cutting thanks to the linear guide system • Saw blade diameter Ø550 mm OPTIONAL • Cooling system • Capability to operate with digital meter Pgsdpforamzfjx Ab Usi

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Psdpovtarnofx Ab Uegi Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.