ES 330/80 HL. ST

ENGEL

Condition: excellent (used), ROTARY TABLE D1100 2STAT – with VC400 rotary unit Additional specifications: Hodpfx Anoz Rxf Ao Nefn Max. load: 2.5 t The weight of the rotary unit, including the hydraulic manifold, is approx. 2,000 kg.

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Hedspdr Aiopfx An Nsfn Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Hfsdez Rplyepfx An Nsn Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Hfedpfxefnqaps An Nsn

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P EU shipping approx. €350 Hjdpfx Ansl Skl Is Nsfn

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Hfsdsx Up Rnopfx An Nsn Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Hfjdpjz Nxilofx An Nsn Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Hjdpfsr Igv Rsx An Nsfn Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Hedozhudkopfx An Njfn

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm Hfedjz Nkavopfx An Nsn - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hfedpfxjda Ha No An Nsn Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control: CC200 Fully functional Condition: very well maintained Machine comes from original German ownership Extras: - Handling system Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core pull unit 1x - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm Hfsdpfxjz Ng Rwe An Nsn - Approved for use up to 350°C - Tool nozzle control, single hydraulic - Swiveling injection unit - Screw S8, highly hardened, wear-resistant / for thermoplastics - Screw length L/D 20 - Hydraulic system HV1 for sequential motion sequence - Interface for color dosing - 4 sockets 10A/16A, mold closing side - Interface for ejector locking - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased 2183 bar Injection volume: 618 ccm Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar spacing: tie-bar-less Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Available immediately from our warehouse in Hanover/Germany, or delivered to your location for an additional freight charge. Worldwide delivery possible. The machine is our sole property. The requested machine is available immediately in our warehouse in Hanover and is offered after functional testing and can be inspected under power. For information about the machines we offer and our company: - We only sell machines that we have purchased from ongoing production, from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not intermediaries dealing with third-party property. - All offered machines come from successful companies where maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Hedpez R Tv Dsfx An Nsfn Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Hfedevxh Iuepfx An Njn Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: excellent (used), Year of construction: 2003, Engel ES 1800/300 HL-V Clamping force 300 tons Year of manufacture 2003 Hfjdpfx Ajww Nu Eon Nen Screw 70 mm Max shot volume 1039 cm³ Core pull x3 Including robot