Robots Fanuc M-6i 1999

Fanuc M-6i

Condition: used, Year of construction: 2009, Technical details: Djdst Rmdzjpfx Afxjwb turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Dwedpfx Afjtk N E Texob Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Dodpfx Afoy Hvp Isxewb

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe Dodpfozqv A Tex Afxowb

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Dwodpfoyq Hq Nox Afxsb Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Dsdszkry Iepfx Afxewb Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Dodjy D Enhjpfx Afxewb Suitable for pendulum machining (machining on one table, loading on the other).

Condition: good (used), Year of construction: 2010, Industrial robot Manufacturer: Kuka Type: KR16L6-2 Year of manufacture: 2010 Reach: 1911 mm Weight: 240 kg Payload: 6 kg Kuka controller KRC2ed05 Dwjdpjtphqhsfx Afxjb Weight 209 kg Processor 2GHz Operating system: WinXP Software version V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m 22726

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We offer this overhauled HAAS TR210 rotary/tilting table, year of manufacture 2015. The TR210 is a two-axis rotary/tilting table with tailstock, providing maximum rigidity and precise performance for 3+2 and full 5-axis machining of small to medium-sized parts. Encoders on the A-axis (tilt axis) improve positioning and repeatability accuracy. The TR210 fits VF-3 and larger machines from the VF series (the extended Z-axis clearance option is highly recommended). The table has been overhauled and serviced. All worn spare parts, seals, and O-rings have been replaced. We can provide a video upon request showing flawless machining. If you have any questions or need further information, please feel free to send us a message or call us. Dwsdpfx Afoyxw Ayexjb

Condition: used, Year of construction: 2007, turning diameter 325 mm turning length 600 mm control Siemens type 840D turning speeds 5000 U/min power capacity 25 kW total power requirement 35 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5x2,5x2,1 m Dsdsyquwkopfx Afxjwb Tool speed: 4500 rpm X-axis rapid traverse: 60 m/min Z-axis rapid traverse: 45 m/min Machine with Siemens 840 D powerline with Shopturn - C and Y axes, driven tools - IRCO ILS-RBK bar loader - Coolant system with internal coolant supply - Paper belt filter - Partial hollow clamping device - Oil mist separator - Counter spindle - Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team