HYDRAULIC PRESS

FISCHER

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm Gjdpjvuk Rdofx Amyeit working lenght 3200 mm dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck year of manufacture 1975 - modernization 1993

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ Gjdpsfmqqlofx Amyjit PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm Giedpfxora Rrho Amyet distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Gsdpfxovcqtzj Amyeit Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 Gisdpfxog Ufvbe Amyst effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: used, Beer preheater Product flow rate: 15,000 l/h Manufacturer: Fischer Heat exchanger 40 CFP, 232 kW Year of manufacture: 1983 / 2002 Additional title: Heat exchanger for beer heating Godpsw Tmh Hjfx Amyjit Capacity: 16000 l/h Length: 2600 mm Width: 1500 mm Height: 3100 mm Operation / Control: manually / Siemens hardware controller Material: stainless steel Position: free standing Features: Plate heat exchanger with fittings for beer / hot water, tube heat exchanger with steam and condensate fittings for water heating, water pump, control cabinet with hardware controllers

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Giodpfx Amsxlu Tasyot

Condition: excellent (used), 16 end mills with indexable inserts Giodpfxjdx D Tvo Amyjt Make Walter Weight 9.5 kg

Condition: used, Year of construction: 1999, pressure 200 t Gijdoy H N Iwjpfx Amyot chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm weight of the machine ca. 16.000 kg dimensions of the machine ca. 4500x2400x3000 mm

Condition: used, Length ~ 77 lfm Depth 600 / 800 / 1200 mm Height ~2000 - 4000 mm Stands, quantity ~ 56 stk Lot of screwed cantilever racks Fischer and others. Gedpfx Aoy Ez Dnjmyeit This is the complete factory equipment of a small planing mill. Free-standing and wall-mounted. One-sided and two-sided. Completely variable.

Condition: new, Year of construction: 2022, functionality: fully functional, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,500 mm, turning diameter: 2,500 mm, faceplate diameter: 2,000 mm, total height: 7,260 mm, total width: 6,280 mm, total length: 4,500 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 1 rpm, torque: 40,400 Nm, spindle speed (min.): 1 rpm, warranty duration: 24 months, overall weight: 45,000 kg, faceplate torque: 40,400 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 2000mm Giodpfsvtytxox Amyet - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: ready for operation (used), Johann Fischer 2000mm x 2000mm Granite Surface Plate Measuring Plate Granite Plate Granite Dimensions: 2000mm x 2000mm x 300mm (L x W x H) Height with supports: approx. 860mm Net weight: approx. 3500 kg Accuracy: DIN 876/1 Grade: 1 Flatness: actual deviation 0.0155; permissible deviation 0.030 Reference temperature: +20 °C You are welcome to arrange an inspection appointment. We are happy to organize cost-effective shipping for you! Giedsy Iapuspfx Amyot You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: used, functionality: unexamined, machine/vehicle number: DC18330, total width: 2,000 mm, total length: 2,000 mm, We are offering this used Johann Fischer Aschaffenburg measuring plate, type IDT009 – surface plate, spotting plate, marking-out plate, year of manufacture unknown. Giodpfxjy H Dgbs Amyet Manufacturer: Johann Fischer Aschaffenburg Origin: Made in Germany Type: Measuring plate Item number: IDT009 DC number: DC 18330 Inventory number: QS-00355 Inspection date: 23.3.03 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: Gisdpfx Astrf Smsmyst - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Giodpsg Umb Eofx Amyet Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.