Lathe / turning machine

Gildemeister MF-Twin 300

Year of construction: 1998, condition: used, 2 Kedpsqn A Rgofx Ad Esnd turning diameter max. 250 mm toll turrets 2 x 12 control Fanuc 16 T tool taper HSK 63 04800000181 frequency 50 Hz ampere 168 A

Year of construction: 2000, condition: ready for operation (used), Cutting Erosion Machine MAKINO EU 64 Knsdpfsgwp Eqjx Ad Eod X=600 mm Y=400 mm Z=260 mm workpiece dimensions WxDxH max 940x650x260 mm Workpiece weight max 1500 kg Service due before commissioning !!! Current service report from Makino can be sent on request

Year of construction: 2011, operating hours: 23,747 h, condition: ready for operation (used), General Data Machine weight 5650 Control Unit Brand FANUC Model 31i Model A Main Drive Spindle speed range 6000 Spindle motor power 11/7.5 kW Turret Number of turrets 2 Number of tool slots 12 Media Chip conveyor Yes Additional Equipment TOP AUTOMAZIONI FU 342 bar loader Knjdpswn N Rbefx Ad Esd This 3-axis NAKAMURA-TOME WT-100 was manufactured in 2011. It features a CNC FANUC 31i Model A, turning length of 503 mm, and a maximum turning diameter of 190 mm. The machine includes two motorized turrets with 12 tools each, a bar capacity of 42 mm, and a TOP AUTOMAZIONI FU 342 bar loader. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Knodpfx Adowa T Hko Eod Fully functional, in very good condition. Already disassembled and stored.

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Knodpfx Adeuw Izvs Eod Bar loader TOP Automazioni XF 375

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Knjdsgvkmrepfx Ad Eod Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,612 mm, travel distance Y-axis: 5,645 mm, travel distance Z-axis: 1,250 mm, table length: 7,000 mm, table width: 2,500 mm, spindle speed (max.): 4,500 rpm, distance between stands: 3,800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm Knodpfx Adexgr Epe Eod • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between uprights: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed, 2-step, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC operation (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" monitor • Tool changer with 60 positions • Rotary table for operation with multiple milling heads and automatic milling head change, consisting of collet system for holding various milling heads, quick couplings for hydraulic, coolant, and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face toothing (on the mounting plate and respective milling head) • 2 x milling heads: straight-head adaptor (direct spindle), automatic 45° milling head • Crossbeam motorized traversable (for positioning only) • Operator platforms: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-axis, each with 2 doors • Chip conveyor on both sides of the table plus a transverse conveyor • X-axis longitudinal and Y-axis cross drive by rack and pinion with 2 servomotors (play-free electronic pre-tensioning, master-slave principle) • Z-axis vertical adjustment by ballscrew (Ø 80) with preloaded double nut • Zayer guideway system made of inlaid or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each track surface • Counter-guides on all axes with additional polymer coating for optimal damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for completeness or accuracy. The decisive factors are the actual technical data and functions of the machine.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Kedpfxoq U Sa Ss Ad Ejnd Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 Knodpfx Aouhtg Aed Eed - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: like new (used), Year of construction: 2020, Machine type Machining center - Vertical Manufacturer DMG MORI Type CMX 600 V Year of construction 2020 Control 840D SL Slimline Multi Touch Operate 4.7 Country of origin DE- Delivery time by arrangement Freight basis ex location Technical details x-path 600 mm y-path 560 mm z-path 510 mm Control unit 840D SL Slimline Multi Touch Operate 4.7 Main spindle: Max. Max. speed 12,000 min/-1 Drive power - main spindle 13 / 9 kW Max. Torque 82 / 54 Nm Kedsrwi Swjpfx Ad Eond Tool holder SK 40 Distance between spindle nose and table 120 - 630 mm Work table: Table clamping surface 900 x 560 mm Max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool positions 30 pos. SK 40 tool holder max. tool diameter 80 mm max. tool diameter with free neighboring box 130 mm Max. tool length 300 mm Max. tool weight 8.0 kg Tool - tool change time 2.4 sec Changing time chip - chip 6.7 sec Feed rates: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirement approx. 4.0 x 5.0 x 3.0 m Accessories documentation Chip conveyor Coolant unit High-pressure cooling 12 bar Internal coolant supply electric handwheel Signal lamp - 4 colors Measuring probe PP40 Tool measurement