Hydraulic press

Hidrogarne CM-50NC

Condition: used, Year of construction: 1956, A3 platen with HAKRO hot foil stamping device Iedpjxvcg Ajfx Ab Tjtc available at short notice

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm Itedpou Nfvusfx Ab Tjc max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Technical details: pressure: 100 t Itedpfx Abevc Ax No Toc daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m Itedpfx Abov Rgwxe Toc

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Iodpfswp Nv Hjx Ab Tstc Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering a beautiful eccentric press from Schuler/Beutler Nova AG, model CFL63c C-frame. The machine is under power, ready for demonstration and can be tested on site. It is suitable for both safeguarded and non-safeguarded tools. Technical data and information: Year of manufacture: 2020 Control system: CCS/PNOZmulti Rated power: 4 kW Rated force: 630 kN Working energy (J): 2750 Max. strokes in continuous operation (min-1): 30 - 120 Max. strokes in single stroke mode (min-1): 60 Itodpfext Nxtox Ab Toc Table dimensions: 820 x 590 mm Ram dimensions, max. tool size: 470 x 415 mm Ram bore Ø: 50 mm Max. weight of upper tool (kg): 200

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: Iedpfx Abetv Ewdj Tjtc - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards --- Are you looking for a customized machine? Contact us for a customized offer.

Condition: used, Year of construction: 2017, machine/vehicle number: 2FW21520, Canon IRAdv C3520 This is a Canon IRAdv C3520 copier in very good condition, delivering high-quality copies with a low print count. Meter reading: 33,000 copies (21,000 black and white, 12,000 color) Options: PCL / PS / Send / Paper supply unit with 2 cassettes. Technical data: Power supply 220-240 V, 50-60 Hz CM SOLUTIONS is one of the leading French and European companies in the purchasing, sale, and remarketing of second-hand office equipment. By integrating transparency, expertise, and ethics at every level of our activity, we offer our clients high-performance products at competitive prices. Why do clients choose CM Solutions? Itjdswhpquopfx Ab Toc - 30 years international experience in more than 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large inventory of 2,000 copiers available for immediate delivery - A team of qualified technicians Please don't hesitate to contact us for further information.

Condition: excellent (used), Year of construction: 1984, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, type of input current: three-phase, stroke length: 500 mm, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Iodpfsqy E I Rjx Ab Tstc

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm ram surface 280 x 280 mm dayligth 400 mm oil volume ca. 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m Iedpfshbalnsx Ab Totc - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder