Edgebander

HOLZ-HER 1308 XL

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch Hodpfx Ajznuncof Ajfk

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Hfsdpfxsvymdqj Af Ask Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch Hjdeznucyopfx Af Aefk

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 Hedpszk N U Ajfx Af Asfk - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Hfedpfxsx A Tgys Af Ajk Operating Units: 7 nr

Condition: used, Year of construction: 2013, Second-hand machine Year of manufacture: 2013 Features and technical specifications: - Control system with 15 -touchscreen - Joining milling unit with 2 milling heads - Edge feed - GluJet 301 adhesive application system: 2.3 kW, automatic adhesive height adjustment, feel-feed nozzle - Pressure unit: pneumatic - Cross-cut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper blade - Sanding unit - Extendable workpiece support - Motorised pressure bridge adjustment with NC axis via programme control Hfsdezk N Dkspfx Af Aek - Extraction hoods for cross-cut unit - Multifunctional milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 draw-knife unit with chip collection box - Spray system for the infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6–60 mm - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4,930 mm - Weight: 1,420 kg Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm Hodozib Nispfx Af Aefk automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic Hfsdpfx Afsx Huhce Ajk (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications Hjdpfxoy T D N Ae Af Aefk - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence Hfodpfou R Sy Ajx Af Ajk - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Hfodpfx Afjzc Ilxs Aok