Pillar Drilling Machine

IBERDRILL BC 50 VE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 50 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 60 mm Max. thread cutting capacity for steel (St 60) under continuous operation S1 M 42 Max. thread cutting capacity for grey cast iron (GG 20) under continuous operation S1 M 50 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 200 mm Spindle motor power 4 kW Drive 3-speed gearbox and V-belt Speed adjustment stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm 30 – 300; 90 – 900; 190 – 1,900 rpm Feed automatic or manual Number of automatic feeds 4 speeds Range of automatic feeds 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm Column diameter 175 mm Distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimensions of transport packaging (length x width x height) 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with high-quality gears and automatic oil pump lubrication and V-belt 3 gearbox speeds can be preselected via 1 front lever 3 speed ranges with stepless speed adjustment via frequency converter digital speed display integrated in the front panel 4 automatic feeds electromagnetic clutch ergonomic 4-way handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth, automatic tool ejector adjustable, rotatable and tiltable work table (Type MGI) machine base plate with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, switching electrics in the low voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance instructions Chjdpfx Ahjgy Hals Isa

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Chedpswuuc Aefx Ah Ija Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: new, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table dimensions 1100 x 735 mm Panel table 3200 x 400 mm Cutting length 3200 mm Max. saw blade diameter 400 x 30 mm Max. cutting height 90° / 45° 125 / 88 mm Cutting width with parallel guide 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Extension table with roller 1240 x 860 mm Main saw blade speed 3000 / 4000 / 5000 rpm Scoring saw blade speed 8000 rpm Scoring saw blade 120 x 20 mm Dust extraction connection Ø 100 mm Motor output S1 100% 5.5 kW (7.5 hp) Motor input S6 40% 7.5 kW (10.0 hp) Scoring motor output 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Scope of supply Chodpfxjd N S T Dj Ah Iea • Electric saw blade height adjustment • Digital cutting height display • Saw blade guard with infeed roller • Miter fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal fence flaps • Extension table with roller • Sliding block • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running twin-roller carriage with center and end position locking for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Extension table with roller for simplified handling of larger workpieces • Foldable parallel guide with micrometer fine adjustment (advantageous for large panels) • Standard equipment includes a separately driven scoring unit (motor output 0.75 kW) • Stable saw unit with pivot elements made of gray cast iron, guided on both sides • Table widening for cutting widths up to 1300 mm included in the scope of supply • All aluminum parts (panel table, fences, etc.) are anodized • Extendable telescopic fence (up to 3200 mm) can be mounted on the extension table at the front and rear, infinitely adjustable from 90° to 45°

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm Cedpevpfzyofx Ah Ieha throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm Codpfx Aju Idkzoh Ioha table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Csdpfeyxn Tijx Ah Ioha Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Csdpfexwbydox Ah Ijha Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22 Chedpfx Ahex A Th Ro Isa

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine Cedpfjpxmlijx Ah Isha with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: new, Continuous drilling capacity in St 60 steel: 35 mm Normal drilling capacity: 40 mm Threading capacity: M 30 Spindle: MK 4 Feed rate, continuously adjustable: 20 - 400 mm/min Programmable drilling depth: 175 mm Overhang: 300 mm Distance between spindle and table: 70 to 830 mm Table surface: 550 x 400 mm Column diameter: 120 mm Overall height: 1,980 mm Weight: 450 kg Motor with pole change: 1.5 / 3.0 kW Spindle speeds, continuously adjustable, range A: 120 - 2,500 rpm Chsdpfsb Nbvgox Ah Isa Spindle speeds, continuously adjustable, range B: 60 - 1,200 rpm