Milling unit

IMA

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kjdpfx Asvvkfdjgzofa

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (Right) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Kfodpfx Aoff R Tqsgzja Blowing Air Table, infeed and outfeed (total dimensions mm 3520 x 2560) 180° transfer (mm 3120 x 2140) with motorized roller conveyors and motorized belts Motorized carpet (mm 9080 x 1560) Panel Dimensions (MIN/MAX): Length - 240 mm / 2800 mm Width - 120 mm / 1300 mm Thickness - 8 mm / 60 mm opt. up to 100 mm

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Kodpfxopzfcgj Agzsfa Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical data: Kfedpfsrk Tqkex Agzea - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term Location: Solingen

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Ksdpfx Ajxgrfpjgzjfa Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: used, mileage: 352,760 km, power: 180 kW (244.73 HP), first registration: 11/2006, fuel type: diesel, maximum load weight: 3,070 kg, overall weight: 6,500 kg, For information Kedpfx Aevii Tysgzefa

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Kfjdpfx Aornkw Dogzea Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Kodpfeugmw Esx Agzofa

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Kedoltmnlspfx Agzofa Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Ksdpfx Askt Uuasgzofa Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"