Cnc turning and milling center

INDEX G200

Condition: good (used), Year of construction: 2007, CNC turning machine, manufactured by INDEX, model G200C-4, year of construction 2007. Control system: Siemens / INDEX, with bar feed system Hydrobar up to 42 mm. Maximum turning diameter: 200 mm. Turning length: 445 mm. Bar passage: 42 mm. Equipped with collet chuck, tailstock, chip conveyor. Machine documentation available. Further data can be found in the data sheets. Dksdps Aiczbsfx Ak Asw

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader Dkodpfx Akeycvaqe Aow - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: good (used), Year of construction: 2003, CNC turning machine, manufacturer: INDEX, type: G 200-4, year of manufacture: 2003 Control system: Siemens Chuck diameter: 160 mm Dksdpfxo Aicyze Ak Ajw Spindle bore: 42 mm Turning diameter, max.: 200 mm Turning length: 445 mm Chip conveyor, machine, documentation included. Without tailstock. Further data can be found in the data sheet. In good condition.

Condition: good (used), Year of construction: 1996, CNC lathe, manufactured by INDEX, model G200, year of manufacture 1996, with Hydrobar bar feeder. Control system: Siemens. Maximum turning diameter: 200 mm Maximum turning length: 445 mm Dkodpfxs Aicyaj Ak Aow Spindle bore: 30 mm Further data can be found in the datasheets. Machine documentation available. Machine in good condition.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, Djdpfx Ajzg Efijk Ajkw 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,091 h, functionality: fully functional, spindle motor power: 20 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 155 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 400 mm, total height: 1,850 mm, total length: 2,500 mm, total width: 1,910 mm, distance table center to spindle nose: 1,100 mm, overall weight: 4,300 kg, spindle diameter: 65 mm, feed force X-axis: 105 N, feed force Z-axis: 400 N, We are selling our INDEX G200 Compact. Dkedpo Ah Tn Uofx Ak Aew The machine is in excellent condition. It will be sold including a bar loader, chip conveyor, and various tools.

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle diameter: 60 mm, We are selling our INDEX G200. The machine is in excellent condition and can be inspected while powered on. It is being sold including a bar feeder, chip conveyor, and various tools. The machine has only been operated with oil. The machine has X/Y/B axes! Dodpfx Aoz I Rxnsk Aokw

Condition: good (used), Bar feeder LNS Dksdpfjr Iygiex Ak Asw

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Dkedpfxjz Hzdxo Ak Ajw

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Djdpfxou T Rgke Ak Aekw

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model Dksdpfx Akevtrc Ss Ajw The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Dksdpfx Akotdwwme Aew

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Dsdpjym Dgmsfx Ak Aekw

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Maximum bar diameter: 66 mm Dksdpfjzp Itusx Ak Aow X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Year of construction: 2003, condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Dedpfjtdwwqex Ak Askw