Welding robot

KUKA

Condition: ready for operation (used), Year of construction: 2018, operating hours: 225 h, functionality: fully functional, overall weight: 160 kg, load capacity: 10 kg, arm reach: 1,420 mm, repeat accuracy: 0.04 mm, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a ProModulR cell! TECHNICAL DETAILS Reach: max. 1,420 mm Rated payload: 10 kg Rated additional load, carousel: 0 kg Rated additional load, swing arm: 0 kg Rated additional load, arm: 10 kg Rated total load: 20 kg Positional repeatability according to ISO 9283: ± 0.04 mm Number of axes: 6 Mounting area: 333.5 mm × 307 mm Range of motion A1: ± 170° Range of motion A2: -185° / +65° Range of motion A3: -137° / +163° Dwjdpfeznh Snex Apwsa Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° Axis speed A1: 220 °/s Axis speed A2: 210 °/s Axis speed A3: 270 °/s Axis speed A4: 381 °/s Axis speed A5: 311 °/s Axis speed A6: 492 °/s MACHINE DETAILS Protection class according to IEC 60529: IP65 Protection class robot hand according to IEC 60529: IP67 Ambient temperature during operation: 5 °C to 45 °C Ambient temperature during operation: 278 K to 318 K Mounting positions: Floor Ceiling Wall Any angle Weight: approx. 160 kg Operating hours: 225 h

Condition: reconditioned (used), EWAG WS 11 is a Tool and cutter grinder designed for precision, high accuracy and reliability. X/Y/Z travel 100 mm; grinding-wheel Ø75 mm; A axis -135°/+30°; workspindle 100–1300 rpm; vertical head travel 100 mm; collet nose 20 W. Wheel spindle 2500–7100 rpm; 380 V 60 Hz; 0.4 CV; ~350 kg; 1000×1000×1800 mm. Accessories: set of collets, flanges, wheel arbors, lamp, Z feed unit. Achieves tight tolerances; suited to automotive, aerospace, watchmaking, medical sectors. Dsdpfx Apoyxnz Tswjwa

Condition: ready for operation (used), Year of construction: 2020, operating hours: 26,600 h, functionality: fully functional, machine/vehicle number: 1026106, overall weight: 57 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller model: KR C4 compact, repeat accuracy: 0.02 mm, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a testing facility. TECHNICAL DETAILS Maximum reach: 1,101 mm Maximum payload: 10.9 kg Repeatability according to ISO 9283: ± 0.02 mm Number of axes: 6 Range of motion A1: ± 170° Djdjznh Rqopfx Apwewa Range of motion A2: -190° / +45° Range of motion A3: -120° / +156° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° MACHINE DETAILS Controller: KR C4 compact Teach pendant: KUKA smartPAD Cycle rate: 140 cycles/min Movement sequence: 25 mm / 305 mm / 25 mm Test load: 1 kg Ambient temperature during operation: 0 °C to 45 °C Protection class according to IEC 60529: IP65 / IP67 Protection class in series according to IEC 60529: IP65 / IP67 Dimensions and weight Base area: 208 mm × 208 mm Weight: approx. 56.5 kg Mounting positions Floor Ceiling Wall Any angle Operating hours: 26,600 h

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00632, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Prime manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Prime Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1111   Controller: KRC 4 Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Dwjdpjzrz A Uefx Apwoa Teach Pendant Cable Length (m): 10

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Dsdpsv Ipvxsfx Apwswa

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00634, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Extra manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Extra Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1068   Controller: KRC 4 Djdpfx Apszrz A Iewewa Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00635, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA manufactured in 2017.02. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR360 R2830 Model Number: KR Fortec Year of Manufacture Robot: 2017.02   Payload (kg): 360 Reach (mm): 2826 Controlled Axes: 6 Installation Type: Floor Weight (kg): 2385   Controller: KRC 4 Dwsdpfx Apjzrz Azswsa Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Dwederq D Nijpfx Apwoa Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00636, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2900 Prime K manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2900 Prime K Model Number: KR210R2900 Djdpfx Ajzrz Auepwowa Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2900 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1180   Controller: KRC 4 Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: used, machine/vehicle number: 008518, Lifting capacity: 180 Kg Number of controlled axes: 4 axes Arm extension: 3200 mm Dsdpfxjzruygo Apwowa

Condition: new, ZEATZ NC rotary tables, PHV series – available for short delivery times The ZEATZ NC rotary tables from the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines with HEIDENHAIN or SIEMENS control systems ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load-bearing capacity for heavy workpieces Why ZEATZ: Dsdpfsm Tvz Dex Apwowa ZEATZ stands for innovative NC rotary table solutions with the highest precision and reliability. Thanks to robust construction, backlash-free drive systems, and state-of-the-art control technology, the rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless turning, and interpolative machining in a single setup Sizes: Faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional square clamping surfaces also available) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS control systems Your advantages: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast supply of spare parts ✔ Support for integration and commissioning ✔ Numerous reference projects available in Germany

Condition: used, machine/vehicle number: 008520, Lifting capacity: 180 Kg Number of controlled axes: 4 axes Arm extension: 3200 mm Dwjdozruxiepfx Apwja

Condition: used, Year of construction: 2003, Product information "Kuka industrial robot KR 15/2" 6-axis industrial robot Type / Model: KUKA KR 15/2 Condition: Used Dwedpfx Apozrl Nxewsa Year of manufacture: 2003 Technical data Payload: 15 kg Reach: approx. 1,500 mm Number of axes: 6 Repeatability: ± 0.1 mm Weight (mechanics): approx. 222 kg Controller: KR C2 Weight (controller): approx. 185 kg Inquiry item! Shipping costs will be quoted individually.

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system Dedpfx Apem Nbubjwswa More pictures on demand

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 1,412 kg, load capacity: 240 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2, Equipment: documentation/manual, For sale is a KUKA KR 240-2 2000 industrial robot in good used condition. The robot comes from an industrial application and is fully functional. Before delivery, the robot will be thoroughly tested again to ensure proper operation. This guarantees that you will receive an immediately deployable and reliable solution for your automation tasks. An inspection while the robot is powered on can be arranged at any time. Scope of delivery: Dodpfx Apezdihdswjwa - Mechanical components (manipulator) - Control cabinet / controller - Operating panel (teach pendant) - Connection cable