Bed type milling machine

LAGUN BM 2RT

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 800 kg, overall weight: 5,000 kg, total length: 5,000 mm, total width: 2,500 mm, total height: 2,200 mm, warranty duration: 12 months, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, working range: 3,000 mm, With the OR-S1530, Oree Laser offers a compact and easy-to-operate laser cutting system in large format. Our company, SF-Tech Engineering GmbH, is the Swiss representative of Oree Laser. All machines are newly imported and assembled according to customer requirements. We also provide training and service. In our showroom you can test the OR-S1530 including all accessories (high pressure compressor, suction system...). Technical data Working area: 3060mm X 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4'500kg Positioning accuracy: 0.03mm Max. Cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone controlled fume extraction The side machine door can be easily raised or lowered at the touch of a button. The total height of the machine is 2200mm. The work table can be easily pulled out of the side of the machine by hand. This enables safe and fast loading and unloading of the machine. There are two new variants: Fslhcsr D N Dzscqtjgi 1st variant, a 60% extension table, without support on the floor, max. 800kg load. 2nd variant, a 120% extension table, with fold-out arms, max. 900 kg load. Do not hesitate to visit us in our showroom in 6281 Hochdorf.

Condition: as good as new (ex-display), Fronius TPS 2700 Pulse Device Ready to Weld ---> Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. adjustable from the torch) ➤Ground cable 3-4m ➤Pressure regulator with new blade ➤Gas hose ➤15kg spool adapter ►►► Perfect for mobile use This device is perfect for quick and mobile use. Quick to fit in the car and easy to take anywhere - yet no loss of welding quality. Also suitable for stationary use, of course. Questions: ----- How old is the machine? Our customers usually retire their devices between 3-5 years old. Sometimes more, sometimes less. What is the condition, and does the device even work properly? Yes! Everything works as it should! We disassemble, clean, replace wear parts, reassemble, and test all devices. The devices are clean; we don't have any that look completely finished! They're in great condition! Only minimal signs of wear. All pictures are original photos of our devices. They're sample images. We don't have any displays with burn holes. Can I negotiate the price with you? If you buy multiple devices, we can discuss the price. Is shipping possible? Yes, it's possible. We pack the device on a pallet and ship it insured via our shipping company. Fgolevl D Idjhccqtji Can I view the devices somewhere? We have an online store; you can come by to pick up a device, and of course, you can also test it with us before paying. We don't have regular business hours. Everything works by appointment. All devices are assembled according to customer specifications and delivered after payment—that's our standard procedure. Do you offer a warranty? No, we don't offer a warranty. We sell like-new, used, affordable professional welding equipment, usually for 1/4 to 1/2 the new price. For the difference compared to a new device, you can buy two more from us, or you can use the savings to maintain this or several devices for many years. For example, the Fronius TPS 2700, as advertised here, costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting from prices; you can configure the devices with us. ...

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces Folhothumusccqtsgi - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Fjlhcslrqiqscqtegi Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system Fjlhccqslaugastsgi KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Year of construction: 2024, condition: new, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay Fgelhccqeh Imyastsi • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Max Speed Axis 1 70°/sec Flange diameter 400 mm ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Folhet I Di Aeccqtsgi Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg Folhew A Sqmeccqtsgi total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle controlled

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Fgjljwglapohccqtsi Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm - 20-Station Tool Changer - Heidenhain Tool Probe - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Fgjlheua Iw Tjccqtsi Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes