Sawmill

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Iajdpfjzc Euqsx Abvou Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Iaedpfx Ajgwqk Ssbvsu Conveyors system between the machines included.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours Iasdpfeza Urgjx Abvsu EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! Iaedezcpwcepfx Abvju The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron Iedpoyzr Tfofx Abvjau - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Iajdpsza D Rfofx Abvsu Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Iedpfxjza D Iwj Abvjau Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, overall weight: 5,000 kg, input current: 44 A, table width: 1,200 mm, table length: 2,700 mm, The compactor is designed to compact the bottoms and tops of pallets. After one cycle one pallet is nailed. Nailing is carried out mechanically. The machine automatically takes nails from the storage bins, where they are in bulk. The pallet components are taken from the external magazines by two people . The XP 1000 nailing machine is designed to produce industrial pallets in the 800-1200/1200-2600 size range . The nailing cycle is adjustable from the control panel , takes a minimum of 10 seconds . Hammer plates adjustable on the full range of hammer . Standard equipment of the nailing machine includes 16 hammers on eight plates and one set of 800/1200 pallet molds . Other molds on request for an additional fee . The performance of the machine depends on the workers and their speed in stacking the parts. Ijdpfx Ajt Tyn Sobvsau

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Iodpfx Abszargneveau Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, controller model: Siemens Sinumerik 828D CNC, ATTENTION – Equipment update: Instead of a RENISHAW measuring probe, a Renishaw tool presetter is included! TECHNICAL DETAILS Travel range X-axis: 760 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mount: SK40 Spindle speed: 10,000 rpm Ijdpszap Dwofx Abvjau Feed rate: 10,000 mm/min Table size X: 900 mm Table size Y: 410 mm Max. workpiece weight: 350 kg Number of axes: 3 MACHINE DETAILS Control system: Siemens Sinumerik 828D CNC Tool changer: 24-position Drive power: 12 kW Tool cooling through the spindle: 30 bar EQUIPMENT Renishaw tool presetter Chip conveyor

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Iaodpfx Astx A Sxjbvju Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Iodpfx Abszapxzovoau Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Ijdezapv Tepfx Abvjau Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Control: NC EQUIPMENT - Saw band storage

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Iodpfx Abowxdimjvjau Spare parts.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 280 mm, cutting width (max.): 330 mm, saw band length: 3,650 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw blade dimensions: 3,650 x 27 x 0.9 mm Speed: 15/100 m/min Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 mm Iaedpfx Aszaptrebvsu Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Cutting capacity at 60° flat: 170 x 170 mm MACHINE DETAILS Total power requirement: 2.2 kW Weight: 1,240 kg Vise: 340 mm Dimensions: 2,020 x 2,040 x 1,740 mm EQUIPMENT - Roller conveyor 2,000 mm