Thick planers

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00284, Year of construction: 2019, operating hours: 7,836 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load centre: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift: 3,180 mm Free lift: 150 mm Length including fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase centre: 114 mm Aisle width for pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width for pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot distance: 1,487 mm Height of mast lowered: 2,160 mm Height of mast extended: 3,742 mm Overall height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Height of mast extended: 3,742 mm Overall height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 7,836 h EQUIPMENT Charger Attachment: Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panoramic roof Digital display Interior rear-view mirror Operating manual Iodeyiawdepfx Ab Tstc Note: The seat upholstery is worn.

Condition: used, Year of construction: 2006, Falzmaschine / Folding machine Heidelberg TH82/6-4-VFZ Year 2006 Round Pile Feeder  Folding Type 6 - 4 buckles - 1 knife Press Delivery TH70 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Isdpjuhiqwjfx Ab Tjtc

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Itsdjyh Uxyepfx Ab Tsc Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! Itjdpfx Abeyh Uw Nj Toc The machine will remain in operation until mid-May. Viewing can be arranged by appointment!

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC Ijdpsqwyclofx Ab Tstc X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 560123, functionality: fully functional, volume flow: 16,000 m³/h, total length: 12,000 mm, total width: 2,400 mm, Equipment: CE marking, TECHNICAL DETAILS Capacity: 16,000 m³/h Number of filter bags: 180 pcs Connection diameter: 600 mm Iodpfx Aeyh Nyfeb Tjtc Main fan: 22 pcs MACHINE DETAILS Dimensions (L x W): 12,000 x 2,400 mm EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit 3. Pressure rollers (tools included) 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Transport packages: 1 EQUIPMENT CE marking Isdoyh Nt Sopfx Ab Totc

Year of construction: 2023, operating hours: 0 h, condition: new, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel mesh into the desired shape. Product information: Itodsm Tmddopfx Ab Tec - Motor Power: 7,5 kW (5,5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm - Height: 1090 mm - Hydraulic Oil Tank Capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° - Net weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, controller model: Delem DA-41s, bending force (max.): 40 t, working width: 1,800 mm, stroke length: 100 mm, number of axes: 4, TECHNICAL DETAILS Travel distance: 1800 mm Max. stroke: 100 mm Ijdpfx Ajyh Nrbjb Tjtc Pressing force: 40 t Number of axes: 4 MACHINE DETAILS Control: Delem DA-41s Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,900 x 2,140 mm Transport weight: 5,500 kg Number of transport packages: 2 Connected load: 4.0 kW EQUIPMENT Tools Quick-release punch holder European-style tool holder type Finger guard

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Swing diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel X-axis: 271 mm Travel Y-axis: 600 mm Spindle bore: 62 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS CNC control manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Unladen weight: 5,000 kg Transport weight: 5,000 kg EQUIPMENT Itjdpfjyh Npmsx Ab Tsc Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Iodpfx Absh A Sfds Tstc Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm MACHINE DETAILS Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 Ijdpsyh Nl Iefx Ab Tetc EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 8,000 mm, spindle speed (max.): 1,180 rpm, empty load weight: 9,000 kg, TECHNICAL DETAILS Centre height: 315 mm Centre distance: 8,000 mm Swing diameter over bed: 630 mm Swing diameter over cross slide: 360 mm Bed width: 700 mm Spindle bore: 62 mm Max. spindle speed: 1,180 rpm MACHINE DETAILS Control: Conventional Ijdpfx Aeyh Nk Reb Tetc Connected load: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 10,560 x 1,710 x 1,400 mm Unladen weight: 9,000 kg EQUIPMENT Digital readout

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Isdswu Tu Dspfx Ab Tjtc Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 46876, Year of construction: 2019, operating hours: 15,564 h, load capacity: 2,500 kg, lifting height: 5,570 mm, free lift: 1,580 mm, fork length: 1,060 mm, fork width: 1,360 mm, TECHNICAL DETAILS Iedpfx Absyh Nhpj Tetc Lifting capacity: 2,500 kg Lift height: 5,570 mm Free lift: 1,580 mm Overall height: 2,450 mm Fork length: 1,060 mm Fork width: 1,360 mm Minimum fork width: 290 mm MACHINE DETAILS Power type: electric Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 1,530 x 1,500 x 2,460 mm Unladen weight: 6,500 kg Battery year: 2025 Battery capacity: 930 Ah Operating hours: 15,564 h EQUIPMENT Side shift Fork adjustment New battery Half cabin Work lights Free lift