Eccentric press

MIOS T25

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,5 - 4,0 mm material cross-cut 1200 mm² roll diameter 80 mm feed length - 9999,9 mm speed - 90 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,0 x 1,2 mxmxm servo roll feed Nodevzxqljpfx Ag Iowc

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Nwjdpfx Agouqc I Aj Isc Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm 

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm Nwodpfx Ajtqqxbeg Iec ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: excellent (used), Year of construction: 2020, L+M EcoCell 3.9-1200 C Dust Extraction System TECHNICAL DATA Nodsxflx Tspfx Ag Iewc Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of Manufacture: February 2020 Airflow Volume: 3,000 m³/h Voltage: 400 V Current Draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control System: Reco RM-DPC Micro FP Filter Status Display: FC-240 Spark Detection: Control Logic PAN-705 Spark Control Panel Filter Elements: 9 units SCOPE OF DELIVERY Includes (not an exhaustive list): - L+M EcoCell 3.9-1200 C dust extraction system - Filter status display - Spark monitoring system - 9 x filter elements - VDL rotary airlock with motor drive - Control cabinet with operator controls - Additional WESCO separator Exact scope of delivery as shown in the photo series The L+M EcoCell 3.9-1200 C dust extraction system was built in February 2020 and offers a high-performance and safe solution for industrial extraction and filtration tasks. With an airflow volume of 3,000 m³/h, a power rating of 5.50 kW, and robust ATEX certification according to 2014/34/EU, the system is ideally suited for use in hazardous (explosive) environments. It features a state-of-the-art Reco RM-DPC Micro FP control unit and an FC-240 filter status display for precise system monitoring and management. For added safety, it is equipped with a PAN-705 spark detection system. Nine high-performance filter elements ensure efficient separation of dust particles. The configuration also includes a motor-driven VDL rotary airlock, a control cabinet with operator elements, and an additional separator from WESCO. This combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 1983, pressure 25 t throat 225 mm stroke 8 - 85 mm Nwjdpjumm Swsfx Ag Ijc table size 560 x 450 mm ram head dimension 360 x 220 mm ram adjustment 55 mm no. of strokes 80 - 160 Hub/min total power requirement kW weight of the machine ca. 2500 kg dimensions of the machine ca. 1,135 x 1,365 x 2,145 m

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive Njdpfx Aev Tp D Hog Iowc - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Nsded N Siispfx Ag Ijwc -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg Nwodpfed Hvhrox Ag Ioc