High - band saw

Moehringer / Braun Canali multi-line TB 1250 MF-20

Year of construction: 2004, condition: used, High - band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250 mm Roll width 150 mm Blade speed: 28-50 m/s Connected load: ca. 45kW Feed rollers 2 x 4 Height 200 mm Cutting height lower edge pressure Guide 400 mm and higher Cutting width 250 mm left of the blade and 250 mm right of the saw blade with medium cutting device complete technical documentation Cgedpodfcv Ijfx Afnol Follow original photos

Condition: new, Year of construction: 2025, operating hours: 10 h, Engine: CUMMINS - US EPA Tier 4 final, water-cooled, with electrically heated water separator with 24V fuel pre-filter and air filter pre-cleaner - Diesel particulate filter (DPF) - Eco-switch for diesel engine - Cooling fan with reversing function for cleaning the radiators - Automatic central lubrication for attachment and slewing ring raceway - Pinion-tooth lubrication for slewing ring - Emergency control to ensure machine availability during restricted operation By bypassing the main functions - Joystick steering Undercarriage Mobile undercarriage with 4-point support. All-wheel drive Solid rubber tires 12.00-20 (8-way). Cabin Adjustment Cabin adjustment TYPE 270 for SENNEBOGEN MAXCAB. Hydraulically liftable up to approx. 2.7 m Cabin and Equipment MAXCAB Industrial with sliding door including a one-piece, straight windshield with armored glass. Armored glass cab roof window Cab protective grille at the front and top Automatic climate control Air-suspended comfort driver's seat with climate control, seat heating, and headrest Fully adjustable multifunctional armrests for the driver's seat 2-inch safety belt Radio/USB/MP3 and Bluetooth function Position slewing gear brake Interior sunshade for roof hatch and windshield Uppercarriage options Additional counterweight 0.6 t SENNEBOGEN Hydro Clean filter Safety railing Platform next to the cab with railing (bolted) Railing on the uppercarriage, foldable for transport Work equipment Type K18 transfer equipment consisting of: Compact boom 10.1 m and stick 7.9 m Lift and stick cylinders with end-of-stroke damping Hose rupture protection for lift and stick cylinders Limit switches for lifting/lowering and boom on/off Boom damper reduces sway and dampens abrupt movements. Cgjdowb Dnzspfx Afnel SENNEBOGEN 20 kW, 230 V generator system for diesel machines, 100% duty cycle, maintenance-free Safety circuit against short circuits and overloads, insulation monitoring 4-pole generator, hydraulically driven, can be switched off when not in generator mode without hydraulic power loss, control and display unit in the cab. Basic lighting package: Two H4 recessed headlights in the upper frame at the front left and right, two taillights and two headlights at the front left integrated in the cab roof. LED work light with magnetic attachment and 5 m cable for flexible positioning in the maintenance area. Camera system - Basic package with 2 cameras includes: 1 7" color monitor with 4-way split screen, expandable to a maximum of 4 cameras, 2 color cameras with a 115° field of view for the rear view camera and the right side of the machine. Additional lighting package 1: One spotlight mounted on the uppercarriage One LED work light Additional lighting package 2: Two LED spotlights on a pole Two LED spotlights on the boom One LED spotlight on the counterweight Rotating beacon

Condition: refurbished (used), Brenta bought a new one in Italy, worked a little. A complete overhaul and service was done. It is in excellent condition. Cjdpfx Ash Hnn Ujfnjgl

Condition: ready for operation (used), Year of construction: 1996, A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible. Codstpct Eepfx Afnsgl

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Stacking machine by Hanses, heavy-duty design Cedpfx Afexnyt Rsnjgl Consisting of: Cross conveyor, unscrambler, alignment roller conveyor, layer forming section, clamp, 2 cross-cut saws (one adjustable). Forks, lifting platform. Without slat magazine. The entire system is bolted, making it easy to disassemble and assemble. Lengths from 2.5 to 5.0 m.

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: Cgodpolu D Tfjfx Afnsl – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Csdpfjxt Hwaex Afnegl

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm Cedpfxswrw D Rs Afnegl roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Codpfx Aswq N Swefnjgl Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment Cgsdpfx Ajh Dwl Djfnel central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg