Motan LS 80

Motan LS 80/0-0+0-0

Condition: new, capacity 2000 kg/h power 4,0 (5,2) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 875 mm width 735 mm height 1 410 mm insertion resp. discharge height 1 510 mm weight 55 kg Kedpfx Ageb Nvinozjnf material varnished steel discharge height 450 mm suitable for pomaceous fruit, turnips, potatoes, corn, etc scope of delivery schredder disc

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Kedpjghgmzofx Agzenf Drive motor 37 kW

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t Knodpfxofrvzvj Agzsf lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH Kodpfsh Rdwxjx Agzsnf *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 height of stroke 3300 mm Kodpfx Asrxxbtsgzsnf weight of the machine ca. 9650 t

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Knedpfek H Ic Usx Agzjf Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Knsdpfx Aeizkhvogzsf Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Kedpoc Sd D Sofx Agzenf

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. Knjdpfx Agsp T Twuozof It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Motor power: 29kw Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Knedpovtm Uijfx Agzjf Cores: NO Robot interface: YES Bimetal: YES