Used 5 Axis Machining Centre for sale (100,115)

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Iodpjyxn Dnofx Acljif

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor Iedpfxsuxbcis Aclsif machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Iedpfot Dmlfex Acleif Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: used, Year of construction: 2012, x-travel 670 mm y-travel 820 mm z-travel 600 mm control Heidenhain iTNC 530 turning speed range - main spindle 18000 min/-1 drive capacity - main spindle 25-35 kW max. torque 87-130 Nm Iijdpfx Acszu Tnbelef table surface area 800 x 800 mm T-slots 9x90 rotating range 360 ° swival range +/- 120 Grad max. table load 1200 kg tool taper HSK 63 A number of tool places 96 Pos. max. tool diameter 75 mm max. tool length 300 mm max. tool weight 7 kg change-time tool to tool 3 sec rapid traverse ( x / y / z ) 60 m/min total power requirement 85 kW weight of the machine ca. 19 t dimensions of the machine ca. 4,15 x 5 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - New spindle - Refurbished table Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Iijdpfx Acjzux H Aslef Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes Iedpeytcl Ijfx Acleif - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Iodpfx Acezvd U Ujljif Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Isdozrl Dpopfx Acljif Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 Iijdpfxszt Rd De Aclof TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Iiodpoztxpusfx Acljf Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About Us Since 2014, we have been developing and manufacturing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. Iiedpfx Aszu Ikwjclof We would be happy to send you our product catalog; simply contact us. HSC 544HP Machining Center 3rd Generation Key Data - 500x400x330mm travel range - BT30 spindle with 20,000 rpm and 10.5 Nm (other spindle types available) - 18-tool magazine - Feed rate up to 25 m/min - Compact dimensions of W 1,460 x D 1,470 x H 2,110 mm and a weight of approximately 2,200 kg The machines are configured and assembled according to customer specifications. Depending on the requirements, numerous options are available, such as different spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Control System - CS-Lab / AMT - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement while maintaining high accuracy - Integration of, for example, robots, pallet changers, workpiece changers, etc. is possible Machine Frame - Solid machine frame made of mineral casting, optimized by means of FEM simulations - Very high vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive System - AC servo drives, well-matched to the axes, for high contour accuracy - Directly driven and backlash-free ball screws Overview of Spindle Types 60,000 rpm I 0.3 Nm 40,000 rpm I 0.9 Nm 36,000 rpm I 2.4 Nm 30,000 rpm I 3.5 Nm 30,000 rpm I 6.0 Nm 20,000 rpm I 10.5 Nm We would be happy to provide you with expert and comprehensive advice in order to offer you the perfect solution for your machining task.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Ijdpfx Aezapp Hsclsif Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 895 mm A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Tool changer: 46 positions Spindle speed: 24,000 rpm Iisdpfx Aezclk Seclof Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Weight: 12,500 kg Includes coolant system, 40 bar Includes documentation

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - CNC options: Barcode reader, Offcut conveyor, Laser for vacuum pod positioning - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iiodpfxsxtbgpo Aclsf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2003, condition: good (used), DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Iiedpfx Aceztl Hmolof Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Machining center comprising: - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Ijdpfx Acjzvcckoljif Technical specifications: - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. Iedpfszvccdsx Acloif The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online...

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Iiodpszr Uudsfx Aclef Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. Iedpfx Aezrv Dgjcleif From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Iisdpjzrniuefx Acljf Machine is in good condition. Parts shown by hand not come.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We are offering the following machine for sale directly on behalf of the owner. It was delivered in 2026, but due to changed requirements, it will not be used. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES Iedszu Nz Depfx Acljif X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose – table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool interface: HSK63-A Speed max.: 18,000 rpm Power: 63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60 positions EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Isdox A Tfvspfx Acljif

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Iodpfxezm Tice Acleif Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system Iiedpfx Aezukureclof - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. Iijdpszpfg Eefx Aclof X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks