Used Alzmetall Abomat 30 for sale (129)

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Lajdpfjkytxzex Agzok Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Lodpfxov Iqqds Agzeak

Year of construction: 1987, condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Laodpfx Agji Apu Tjzok

Condition: new, ALZMETALL Alztronic 16 table drilling machine Ljdjxd Tugspfx Agzjak Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: good (used), Machine 1 pictures 1-5 Alzmetall AB 40 SV Price 9500,-€ drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2,4KW Machine weight approx. 500kg Machine 2 pictures 6-12 Weipert SBM 49 Price 4.250,-€ drilling capacity 40mm table 560x560mm quill stroke 180mm Spindle MK 4 Speed 50-1450 rpm Steps 12 Feed rate 0.1-0.2 H8Vxu2W Spindle table 770mm throat 350 mm Motor 1.5 KW Thread cutting device pictures 13-16 Gillardon GB 40 VE Price 3.690,-€ Year of construction: ca.1988 L x W x H: approx.630x985x2020mm Weight: approx. 620kg Drilling capacity ( steel ): approx.40mm Drilling capacity ( cast iron ): approx.50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, stepless: 60-1600 rpm Ljdpfxju Nm Tbo Agzjak Table clamping surface: approx. 640x530mm Feed range: approx. 0.1;0.16;0.25 mm/rev

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display Lsdpfjxabwzjx Agzjak - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Ljdpfx Agjxd Tt Ajzoak Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: new, bore capacity in steel (diameter) 50.0 mm Lsdpfx Ajxabq Iogzeak throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Laodpfxexd Ttpe Agzek Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, bore capacity in steel (diameter) 60.0 mm Lodpfxexabgie Agzoak threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Lsdpfx Agoxd Trrjzeak Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 Lajdpfxexaa R Hj Agzjk (5-digit LED display)

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Lasdpfx Asxd Trlegzok Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, bore capacity in steel (diameter) 55.0 mm threading M 30 / M 42 throat 300 mm bore stroke 140 mm turning speeds 70 - 1200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm weight 380 kg Machine height 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment Ljdpjxaa E Rsfx Agzjak - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Lodpfx Agsxd Trfjzjak Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, bore capacity in steel (diameter) 40.0 mm threading M 24 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 515 x 360 mm turning speeds 80 - 1125 U/min feed 0.10 + 0.20 mm/U column diameter 115 mm Laodpfexaar Rjx Agzsk distance spindle /table 117 / 701 mm total power requirement 1.0 / 1.6 kW weight 270 kg height of the machine 1840 mm Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm Ljdpfxexd Tqbs Agzsak - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German Lajdpfx Agjxaakaozek including special equipment: - Coolant device "B" pos. 25.

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display Ljdpfx Aoxd Tp Djgzeak - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black Lsdpfx Ajxab Rhegzeak including special accessories: - 25. Coolant system B.

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Lodpfx Agjxd Tpwezjak Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 Lajdpfx Agexab Nwezjk - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Lsdpfexd Tpqsx Agzjak Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device Laedpfx Aexab Nksgzsk * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP Laodpexabyiofx Agzjk - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.