Used Amada Ac 2510 Nt for sale (212)

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Isdpfxjwq Dpqj Acusih Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Iijdjxfbb Repfx Acush Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: used, functionality: fully functional, Year of construction: 1992, control type: CNC control, pressing force: 50 t, Equipment: CE marking, angle measuring system, angle stop, centralized greasing system, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Amada press brake Type ITPS CNC DELEM DA-GSR Isdpowt Rfqjfx Acueih Year 03/02/92 Capacity 2 m 50 t Complete with tooling

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm OPEN HEIGHT 370.0 mm Iiodpeuad Nfjfx Acush STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Iisdpfxsxndyns Acujh Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Used automatic band saw Cutting area: (round) 700mm (rectangular) 700 x 800mm Saw band: 7600 x 50 x 1.6mm Saw band drive: 7,5kW Iiodovbvr Hopfx Acuoh Hydraulic drive: 2,2kW Total weight: 6000kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Amada PC SAW 700 Iedpfx Asxmd Dwecueih Used fully automatic bandsaw. Technical basic data: Cutting range: 290 – 700 mm. Main drive: 18.5 kW Saw blade: 8300 x 67 x 1.6 mm. Weight: 10,000 kg. Fully functional, currently powered and in operation. Delivery without roller conveyors before and after the machine. Inspection possible.

Condition: good (used), Cutting capacity: 250 mm round, 250 mm x 250 mm rectangular. Blade size: 3505 mm x 27 mm x 0.9 mm. Blade speed: 27, 40, 58, 80, 115 m/min, powered by a 3.7 kW motor. Working load: 1,500 kg maximum. Technical data Iiedpfx Asv Sk Ikjcush

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Amada hydraulic press brake type HFE 170-3 L (long stroke) Iijdpsw Idyvjfx Acujh working width 3100 mm max. pressing force 170 tons CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) Wila hydraulic clamping for upper and lower tooling

Condition: ready for operation (used), Year of construction: 1997, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 21.576 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm - In inspected condition - Machine video - ?v=k_pjAfjm-Bo Equipment: - CNC electro-hydraulic press brake - CNC control OPERATEUR for 8 axes X1+X2, Y1+Y2, R1+R2, Z1+Z2 - CNC-controlled backgauge adjustment (X1+X2 axis) - CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis) Iodpfsxddt Hjx Acueih - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC controler with new screen - 1x freely movable two-hand control & 1x foot switch - Tool upper wedge crowning - TYPE AMADA - Various insert tools (not complete) - CE marking - Side safety device (swivel doors) - Rear safety device (swivel door) - 2x emergency stop buttons at the front - 2x front support arms - Original operating instructions

Condition: excellent (used), Cutting capacity: Ø 420 mm, square 415 x 415 mm Bundle cutting: max. W 300 x H 200 mm, min. W 180 x H 50 mm Saw band drive motor output: 5.5 kW Iiedpfx Aexk U Uhocush Saw band dimensions: 41 x 1.3 x 4,570 mm Band speed: 15 - 90 m/min, stepless Table load max. 2,500 kg Machine weight 2,200 kg Coolant tank 120 l With roller conveyor/feeder table

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 23,000 h, Used AMADA press brake Type: HFB5025 Number of axes: 8 Backgauge stroke: 650 mm Ram stroke: 200 mm Axes: X1, X2, R1, R2, Z1, Z2, Y1, Y2 Iisdpfxoxb U Hlo Acujh CNC: O2000 with 2D graphic and USB reader

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton Iodpfx Aewz I Irscusih 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters

Condition: used, Year of construction: 2004, This AMADA Vipros 368 Queen is available for immediate delivery. Iiodpfx Aexbgnnjcuoh It is in good condition, except 1 servo valve is broken. More information available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Punching force: 294 kN Max. plate thickness: 6.35 mm Max. sheet weight: 100 kg Punching accuracy: 10.1 mm Strokes per minute: 8 mm Max. ram stroke length: 40 mm Turret speed: 30 rpm X-axis Movement: 2000 mm Y-axis Movement: 1270 mm Table length: 4000 mm Table width: 1500 mm

Condition: excellent (used), Year of construction: 2001, Technical Specifications: Iedpexhf D Uofx Acuoih Working length: 4230 mm Frame gap: 3760 mm Press force: 170 t CNC control: AMADA Operator Number of controlled axes: 5 Motorized adjustable backgauge Throat depth: 600 mm Stroke: 350 mm Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tonnes Accessories: Side-mounted movable safety guards The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 Iisdpsh H Duhsfx Acush description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm Iiedpfx Acsv Ehfajush cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw - including chip conveyor

Condition: used, Offer 41414 Iedoxhfhmjpfx Acujih Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Iijdpfx Asxcztbocueh Brand AMADA Main Drive Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Condition: used, sheet width 2040 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. Iiodpfjxacgwox Acujh back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 3300 kg. range L-W-H 2550 x 2100 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - Rear sheet chute - 1 freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, Control Unit Brand AMADA Model CNC 3i Main Drive Pressing force 100 tons Bending length 3000 mm Number of axis 8 Isdpfoxbii Isx Acueih Additional Equipment Accessories: Includes tool package by arrangement Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Iiodpoxabutjfx Acuoh Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm Iisdsxabgpjpfx Acuoh dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm Ijdpfexaaghex Acueih 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch Iodpfx Acoxabnyjujih - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions