Used Amada Emz for sale (228)

Condition: good (used), Year of construction: 1990, machine/vehicle number: P 00220, Offer 26011 Technical Specifications: - Max. working length 3340 mm - Frame gap 2600 mm - Max. pressing force 100 t - Throat depth 400 mm - Max. stroke 100 mm - Max. installation height 370 mm - Table height approx. 960 mm - Approach speed / rapid traverse 85 mm/s - Pressing speed 10 mm/s - Return speed 80 mm/s Bjdpfx Afjyhbrpjpjwh - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - Equipped with: - 5-axis CNC controller DELEM DA 65 R - CNC backgauge 0 - 600 mm - Segmented punch tools + gooseneck tool - Segmented V-dies + universal die

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: AMADA, stroke length: 200 mm, overall weight: 11,600 kg, pressing force: 173 t, This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Bjdpfxeyap Rwe Afpowh • Voltage: 400 volts • Frequency: 50 hz • Nominal current: 286a • Foreseen power: 165kw Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 100t 3m, 4 axis Press Brake Year 2012 available end January 2026 Press Capacity (KN) 1000 Beam Length (mm) 3110 Distance Between Side Frames (mm) 2705 Bwsdpfxjx Hdths Afpeh Throat Depth (mm) 420 Standard Stroke Length (mm) 200 Standard Open Height (mm) 470 Beam Width (mm) 60 Table Height (mm) 960 Approach Speed (mm/s) 1-100 Bending Speed (mm/s) 1-10 Return Speed (mm) 1-100 Number of Controlled Axis 4 Length (mm) 4580 Depth (mm) 2450 Height (mm) 2685 Weight (kg) 6900

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Bodpfx Aex Trw Isfpswh Additional equipment: Very large number of tools

Condition: excellent (used), Manufacturer: AMADA Europe S.A. Model: HFB 80 Year of manufacture: 1997 Serial number: HFB0 80 25 R970112 Pressing force: 800 kN Maximum stroke: 200 mm Power supply: 415 V / 50 Hz Number of phases: 3 Rated current: 171 A Machine weight: 5750 kg Bwjdpfex H Sl Sex Afpjh

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Bwjdpfxowq Dpqo Afpeh Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Bedpfx Afew Iq Ugspewh Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,000 h, controller manufacturer: AMADA, controller model: AMNC-3i, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2021. It features a high-capacity 9000 Watt fiber laser, capable of cutting up to 25 mm thick mild steel, stainless steel, and aluminum. The machine includes an automatic pallet changer, NC-focus control, and a 21.5” touchscreen AMNC-3i control system. Ideal for precision cutting, consider the opportunity to buy this AMADA ENSIS 3015 AJ. Contact us for more information about this machine. • Type: AMNC-3i • Screen: 21.5” touchscreen • Operating system: Windows 7 • Laser source: Laser diode-pumped fibre laser • Type: AJ-9000 • Laser power: 9000 Watt • Laser wave length: 1.08 µm • Stability: +/- 2% • Pulse frequency: 1–10000 Hz • Duty range: 1-100% • Working range: 3070 mm x 1550 mm • Positioning speed: 170 m/min • Table loading weight: 920 kg • Mild steel: 25 mm • Stainless steel: 25 mm • Aluminium: 25 mm • Brass: 18 mm • Copper: 12 mm • Machine weight (without pallet changer): 9500 kg • Automatic pallet changer • NC-focus control • Oil spraying function • Nozzle changer (16 nozzles) • Sensor cutting head • Diode for positioning • Cutting process monitoring • Safety device • Conveyor belt • Transformator • Cooling unit Bedpex Uxkwjfx Afpewh • Dust collector • Control panel pallet changer

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 19,193 h, control type: CNC control, degree of automation: automatic, actuation type: electric, punching force: 20 t, overall weight: 13,000 kg, Equipment: CE marking, Amada AC2510 +LKI MP250 Year of manufacture 12-2007 Punching force 20 tonnes 51 stations 13,000 kg Bjdpfoyfwqpox Afpowh Y-axis travel 1,270 mm X-axis travel 2,500 mm AMNC control system Includes discharge belts Includes vacuum system Machine is in good condition and has been well maintained. LKI MP250 Automation Year of manufacture 2007 Sheet size Max 2500x1250mm Sheet thickness 0.5 to 6mm Automatic sheet thickness measurement Maximum pallet load 3000kg Price on request

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, controller manufacturer: AMADA, number of axes: 6, overall weight: 8,100 kg, total height: 1,988 mm, pressing force: 133 t, product length (max.): 4,755 mm, This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. • Distance between uprights: 2700 mm • Stroke: 250 mm • Open height: 590 mm • Throat depth: 420 mm • Speeds: • Approach: 200 mm/s • Working: 12 mm/s • Return: 120 mm/s • Hydraulic system: Oil tank capacity 48 liters • Ambient temperature range: 0–40 °C Bjdpfx Aex D Evpofpowh Technical Specification Bending Length 3110 mm

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Max. press force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Bsdpjx Tzl Ijfx Afpewh Working width / opening: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/frequency: 380/50 Rated current: 24 Weight: 9,900 kg ä3226 Availability: immediately

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Bwodpfeyad A Uox Afpeh Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, control type: CNC control, controller manufacturer: TASK, controller model: DBM3, working width: 1,300 mm, input voltage: 380 V, input frequency: 50 Hz, oil tank capacity: 40 l, overall weight: 2,000 kg, total length: 1,400 mm, total width: 1,400 mm, total height: 1,500 mm, year of last overhaul: 2026, Equipment: documentation/manual, PRESS BRAKE SCHIAVI - AMADA RG 25-12 DBM3 TASK. PRESS FORCE: 25 TON TABLE LENGTH: 1300 MM DBM3 TASK 3-AXIS CNC CONTROL. OPERATIONAL AND CONNECTED FOR BENDING TESTS. COMPLETE WITH UPPER AND LOWER DIES. Bwsdpjygvf Usfx Afpeh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3AX, bending force (max.): 35 t, working width: 2,000 mm, stroke length: 100 mm, throat depth: 400 mm, distance between stands: 1,800 mm, oil tank capacity: 50 l, travel distance X-axis: 600 mm, back gauge: 600 mm, overall weight: 3,500 kg, total length: 2,700 mm, total width: 1,700 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, Press brake SCHIAVI - AMADA RG 35-20 Press force: 35 tons Bedeygu Uhepfx Afpswh Table: 2000 mm Complete with upper and lower dies Fully functional with 4-point motorized backgauges CE-certified machine with rear safety enclosure Operating video available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm MASTER TASK 3-axis CNC control Bwjdpoygu Alsfx Afpeh Complete with upper and lower dies Fully functional and connected for tests and video

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Amada CNC-controlled turret punching machine, type VIPROS 368 KING. The machine is equipped with a loading system type PR 300 and an unloading system type MP 300. Bwsdpfxex Sq Ipj Afpeh

Condition: used, Year of construction: 1995, Serial number: 25060334 Operating voltage: 400 V Frequency: 50 Hz Total power: approx. 3.7 kW Cutting size: Diameter of round workpieces: 250 mm Bjdpfsyfpavjx Afpjwh Width x height of rectangular workpieces: 300 x 250 mm Permissible load capacity: Machine weight: 1500 kg Roller conveyor: 1000 kg/m Minimum length of remnant material: 50 mm Minimum workpiece width for detection of missing workpieces: 30 mm Saw blade dimensions: 32 x 0.95 x 3505 mm Speed: 20–80 m/min Hydraulic saw blade control with tension adjustment Includes documentation, additional saw blades, and various spare parts

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Bwjdpfx Aeyfl U Nefpjh

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller Bjdpfx Afogal Avopowh -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg Bedpfx Aegag Ahsfpewh

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel Bwedoxaa N Nepfx Afpoh - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: used, Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device Bwedpfx Afoxaaghjpeh - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library Bsdpexabgpsfx Afpewh - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) Bjdpfexabutex Afpowh - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch Bjdpfx Afoxabnyjpswh - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions