Used Arc for sale (711)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 25 kg, total length: 350 mm, total width: 260 mm, total height: 210 mm, volume flow: 30 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, protection type (IP code): IP55, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Pgedpsftzx Eefx Ab Tsu Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us.

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running Pgodpfx Aoft Ti Tob Tou - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm Pedpfeuy T Exjx Ab Tjgu 4. round arc milling device with radius ruler For radii from 300 - 5500 mm For the production of round, stitch and basket arches Machine and device fully functional and cleaned

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, storage bins, shelf boxes, shelf boxes Psdpfxjuzn Dfj Ab Tjgu -Manufacturer: Schoeller, Arca Systems shelving units -Type: 9131 -Number: 1536 boxes available - Price: per piece, minimum order 5 pieces -Dimensions: 595/115/H100 mm -Weight: 0.5 kg/pc.

Condition: like new (used), Scanner with charging dock and cable Width: 270 mm Height: 120 mm Depth: 245 mm Weight: 2 kg including packaging Condition: Like new Pedpfx Abey Uvtpe Tjgu

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Pedpfoyililex Ab Tjgu Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Pgodpfx Ashp Rcrjb Tsu Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm Pjdpfohp Rc Iex Ab Togu

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Pgedpfxeiidm Ne Ab Tsu Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2022, Siemens 8DJH LLL gas-insulated medium-voltage switchgear. Never used. Psdpez Nxz Uofx Ab Tegu Configuration: LLL - three circuit-breaker feeders. Date of manufacture: July 2022. Country of manufacture: Germany. Nameplate ratings: - Rated voltage: 24 kV - Rated current: 630 A - Rated frequency: 50 Hz - Rated short-time withstand current: 16 kA / 1 s - Rated peak withstand current: 40 kA - Lightning impulse withstand voltage: 125 kV - Power-frequency withstand voltage: 50 kV - Internal arc classification: IAC A FL 16 kA / 1 s - Service continuity category: LSC2 - Insulating medium: SF6 The attached photograph shows the original manufacturer nameplate.

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point Pgjdpfx Ajcnwydob Tju four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed Pgodpfx Abjcnxa Ns Tju massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Pedjr Ig H Tjpfx Ab Togu Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Pjdpfxew Sgnko Ab Tsgu Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 Pgedjvxgrrjpfx Ab Tsu including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Pjdpfx Ajzyf Iksb Togu Left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards - Tool compartment for TFS 107

Condition: used, Year of construction: 1997, functionality: fully functional, System consisting of: Welding robot Romat 310, ROTROL 32 TM controller and programming handset with cable, connecting cable for robot control cabinet Pedestal for robot Tactile sensor, arc seam tracking Drive for Micro SD card for program backup incl. 2 cards Quinto 503 welding machine, wire feeder Welding torch MRW 380, torch hose package Pgodpfxsyh Hl Se Ab Tju Duo drive wire feed unit, torch testing gauge 15 kg wire spool holder, drum equipment Mechanical cleaning, pressure booster 2-station rotary table 4 DP 2200 (load capacity 220 kg per station) 5 m connecting cable to control cabinet 1 light barrier 1 pre-selection start Wiring diagrams Documentation, functional warranty Delivery date: immediately available

Condition: good (used), Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 13.0x355 mm Pgedjyh U Iuepfx Ab Teu -Identification number: 515.0020 -Quantity: 5 packages available -Price: per package -Transport dimensions: 365/140/H75 mm -Weight: 4.6 kg/package

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit Psdpfx Aezhbf Uob Tegu • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 798 C HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 750 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 798 C Power supply voltage (V): 400 ~ 3 phase Discharge capacity (l/h): 750 Operating pressure (bar): 30 - 170 Max. Water heating temperature (C): 80-155 Connection power [kW]: 5.6 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 10 Weight (kg): 96 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Pgsdpfx Abezba Nms Tou KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam Pgodpfx Ajzbha Hjb Teu - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: new, mileage: 70 km, power: 140 kW (190.35 HP), overall weight: 7,490 kg, fuel type: diesel, color: white, total width: 2,150 mm, total height: 2,265 mm, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU Commercial Vehicle Center in Germany, specializing in expertise, service, and consultation, offers you: ISUZU M30 M Double Cab, 7-seater, wheelbase 4,475 mm Chassis Net price / Export price: from €51,258 2-year warranty on the basic vehicle from the date of first registration or up to 100,000 km Standard equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 HP, EURO VI OBD-E (max. torque 510 Nm at 1,600 – 2,800 rpm) Psdpfxjyl D Dce Ab Togu - Particulate filter system with DPD system and AdBlue (the self-cleaning system allows filter cleaning without a workshop visit, thanks to the new DPD regeneration technology that indicates when the function is needed. You simply need to press the DPD button and in 20 minutes the system cleans itself) - 6-speed manual transmission or automated manual transmission (NEES II) with 6 gears and torque converter (surcharge net €1,656) and with cruise control. Wear-free and finely controlled starts are made possible by the installed fluid coupling! Gears can also be changed manually at the selector lever. Depending on the load, the driver can preselect via a button whether the vehicle should start in 1st or 2nd gear. - Front leaf suspension (max. 3,100 kg), rear leaf suspension (max. 5,800 kg), front and rear stabilizer bars - Tires 215 / 75 R17.5 C, single tires at the front - Dual tires on the driven rear axle, spare wheel - Ventilated disc brakes front and rear - Cruise control, speed limiter (90 km/h) - Engine brake - Electric parking brake - On-board voltage 24 V, alternator 90 A, 2x batteries 90 Ah - Diesel tank 100 L / AdBlue tank 16 L - New, modern cab with excellent space utilization, generous headroom, ample knee space, outstanding ergonomics and visibility, low entrance height - Optimal visibility at night provided by BI-LED lighting with headlamp cleaning system - Double door seals to reduce noise intrusion into the cabin and enhance acoustic comfort - Cigarette lighter, cup holders, storage compartments in door panels and roof lining, armrests in door panels - Cab paint: Arc White 729 - Vehicle dimensions: cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm - Suspension seat for driver - Twin passenger bench seat, 3-seater, headrests, seat belt warning system - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height- and tilt-adjustable steering wheel, multifunction steering wheel, inside mirror - Electric windows - Electrically adjustable and heated external mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8" with Bluetooth hands-free system, Apple CarPlay/Android Auto compatible, USB charging port - 7" driver information display - Fog lights, daytime running lights, automatic headlight control - Reversing warning signal - Central locking with remote control - Manual air conditioning - Digital EU control unit (tachograph) Safety Pack 2 Equipment: - ABS: Anti-lock Braking System - ASR: Traction control for rear axle - EBD: Electronic Brakeforce Distribution - EVSC: Electronic Vehicle Stability Control - LDWS: Lane Departure Warning System - MOIS: Moving Object Detection - DWS: Distance Warning System - MAM: Emergency Braking for Obstacles - FVSN: Forward Vision Detection - DDAW: Driver Drowsiness Alert System - TSR: Traffic Sign Recognition - TPMS: Tire Pressure Monitoring System - RM: Reversing camera with monitor - AEBS: A...

Condition: used, first registration: 10/2026, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: USED ROZZI GRAPPLE WITH 5 PRONGS FOR HANDLING SCRAP AND BULK MATERIALS, WITH MECHANICAL ROTOR REF.: 26-ATT-17 MODEL: RV180 WEIGHT: 200 kg CAPACITY: 180 liters Subject to errors and/or omissions. Psdpsz Iunyofx Ab Togu The prices shown do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the field of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and demountable equipment. With an immediately available fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the amount of information and details provided, Aurora encourages customers to verify the accuracy of the data with the sales team.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 10,000 h, power: 66.19 kW (89.99 HP), maximum speed: 40 km/h, motor manufacturer: perkins, gearing type: semi-automatic, Equipment: front-end loader, hydraulics, lighting, power shift gear, trailer coupling, mechanical reversing gearbox loader mower Pgjdpfx Absz Egmvs Tju good mechanical condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 28244704, total height: 800 mm, total length: 720 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 70 kg, type of cooling: water, hose package length: 950 mm, electrical fuse: 63 A, open-circuit voltage: 74 V, welding current at 100% duty cycle: 500 A, space requirement height: 900 mm, space requirement width: 350 mm, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 600 A, Equipment: type plate available, MIG/MAG welding machine from the brand Fronius. The machine is water-cooled, has 600 amps, and features all the necessary settings for various arc types (Pulse/Standard/LSC/PMC). The welding system was mounted on a KUKA robot for testing purposes; all accessories required for installation or use on a robot are included in the scope of delivery! Pgjdpfx Asz Eg Hvob Tsu In excellent condition, including spare guide tubes and a magnetic box for torch holder.