Used Autoclave for sale (111)

Condition: ready for operation (used), Features: Maximum speed 15,000 rpm (depending on rotor) Minimum speed 300 rpm Maximum RCF 21,885 x g (microliter rotor) Temperature set range -9°C to +40°C Run time Standard mode: 1 min - 9 h 59 min, hold = permanent Extended mode: 1 min - 99 h, hold Power rating 120V, 60Hz, 12A Power consumption 1220W Dimensions (W x D x H) 29 x 26 x 14.5 in Weight ~288 lb (~130 kg) Comes with a Heraeus Autoclavable rotor, on the pictures. Good working condition. Nwsdpfxsxqq R So Aatjn Please check out our other listings as well.

Condition: new, Year of construction: 2026, We offer this new Hydro-Thermal Treatment Plant type IWT Moldrup-SPP Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to Ø2,600 mm diameter and 16,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 16,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. Nwjdpfxeymxqao Aaton The plant is built around a heavy-duty Ø2,600 mm × 16,000 mm stainless steel autoclave, handling approximately up to 30 m³ of timber per charge, with operating pressure up to 12 bar (abs) one charge is up to 24 hours. Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Nederzbfcepfx Aatown

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Nodoydpa Tepfx Aatswn

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. Njdpfx Aaoxv Dv Eotswn It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW Nwedpfx Aaovc Axpetsn New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Nwodpov Si Szofx Aaten Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: Nwsdeuvi Saspfx Aaten - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, This item is unused and in the original packaging We have a quantity available Nwsdpsy Iw Etefx Aatjn The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Nwsdpfx Aaju Tipketen Terms of delivery: ex location

Condition: new, functionality: fully functional, Mettler Toledo Rainin Quickflow 4l Aspirator. Rainin QuickFlow Portable Aspirator. Ergonomic handle; 3 adapters fit Pasteur pipette, 1 or 8 universal-fit pipette tips. 4-liter bottle; quick-snap connectors, tubing. Variable speed. Non-contact liquid level sensor. Autoclavable, fits inside hood. Improved ergonomics: Nwjdpfx Aaeua Hatjtjn Switching to continuous mode on the QuickFlow handle eliminates the need to repeatedly press and hold the aspiration button. Guaranteed safety: The robust non-contact liquid level sensor prevents overflow. Simple, self-sealing snap connectors keep any contamination inside the bottle. Workflow flexibility: Single channel, 8-channel and glass Pasteur pipette adapters. From flasks to plates to tubes, QuickFlow adapts to your applications. Good working condition. Please check out our other listings as well.