Used Automated Lines for sale (19,936)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. Dcjdpfx Abjv Hqnae Uof New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Grecon Dimter OptiCut 304R Optimizer Minimum input wood length: 900 mm (with cross chain infeed) Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Lowering, cutting, and acceleration time: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Max. wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade speed: 4200 rpm Max. feed speed: 170 m/min Outfeed belt conveyor with 6 pushers Cutting modes: 1. Fixed length cutting 2. Board length optimization for maximum output Dcodpfx Asyxltyjb Uef 3. Defect removal with chalk marking Total line length: 21 m Year of manufacture: 2000

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Dcodpfxed Hurbj Ab Uof Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Dcodpjywd Akjfx Ab Usf Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: new, Year of construction: 2024, machine/vehicle number: AES80, The line serves for the preparation of shredded cabbage intended for Dodpfjp E Eluex Ab Uocf fermentation and for salads. This line may include following machines and equipment: box pallet tipper, unloading table, semi-automatic cabbage core drilling machine, cabbage shredding machine, conveyor for shredded cabbage , salt/spices dispenser, grated carrot dispenser (or other products like beets, grated paprika), additional functional conveyors for transportation.

Condition: used, Year of construction: 2009, operating hours: 32,500 h, machine/vehicle number: LC603, Used Aseptic carton filling line 8000 bricks/h - year 2009Technical Specifications & Performance DataThis second hand carton filling and packaging line is engineered for Gable Top Diamond Curve cartons with screw caps, delivering reliable performance for industrial packaging and beverage production. Manufactured by Shikoku and Elopak engineering, the line centers on a Shikoku carton filler and integrates Elopak cap application systems, a cap feeding bunker, complete conveyors with buffering, and an Oystar A+F tray packer for end-of-line operations.Main filler: Shikoku S-PS90HA (Year 2009)Container type: Carton (Gable Top Diamond Curve with screw cap)Compatible formats: 0.5L, 0.75L, 1.0LCap application: 3 × Elopak E-PLA-S30 cap applicators (Year 2009)Cap feeding: Elopak CSFS cap feeding bunker (Year 2009, Serial No. 28119)End-of-line: Oystar A+F Traypacker TF (Year 2011), tray configurations 4×3, 4×2, 2×3Electrical (line standard): 400 V, 50 Hz, 3-phaseFiller electrical/air: 400 V, 50 Hz, 3-phase; Current 177 A; Air 582/533 kPa; Air consumption 1350 NL/minElopak E-PLA-S30 (per unit): 400 V, 50 Hz; Current full load 26 A; Max unit current 40 A; Air pressure 700 kPa; Air consumption 3 NL/min; Weight max 1000 kgElopak CSFS bunker: 400 V, 50 Hz, 3-phase; Current full load 3.6 A; Air pressure 415 kPa; Air consumption 50 NL/minConveyors: Complete conveyor system with integrated buffering sectionDocumentation: Instruction manuals and spare parts documentation includedAdvanced Automation & Control SystemsThe line includes centralized electrical control cabinets and interconnecting cabling to coordinate filler, cap applicators, bunker, conveyors, and tray packer. Clear wiring diagram references on Elopak equipment support maintenance and troubleshooting. Format changeovers between 0.5L, 0.75L, and 1.0L are supported, enabling rapid adjustments for production planning. Pneumatic subsystems are specified with measurable air pressure and consumption, allowing accurate utility sizing and stable automated performance.Centralized electrical control cabinets and cablingDefined wiring diagram references on Elopak modulesPneumatic controls with documented pressure/consumptionFormat adjustment capability for multiple carton sizesIntegrated safety sensors and interlocks on modulesProduction Line Integration CapabilitiesThis used bottling line for gable top cartons is designed as an integrated production cell, from filling and capping to tray packing. The complete conveyor system with buffering ensures balanced throughput between stations and minimizes stoppages. The Oystar A+F Traypacker TF accepts multiple tray patterns, enabling flexible downstream logistics. The modular architecture also allows standalone testing of individual units when required, supporting maintenance and phased commissioning.Inline integration from filling to tray packingConveyors with buff... Dcodpfx Absyk E S Ss Uef

Condition: excellent (used), For sale: 3 FINSCAN lines: Dedpfx Aoyvhgwjb Uecf 1x Finscan camera sorting line Boardmaster HD Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Speed: 200 pcs/min Year of manufacture: 2014 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: excellent (used), functionality: fully functional, Dosing/filling line The dosing/filling line consists of: 1. Product pump with inlet hopper Brand Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3, Conveyor belt Brand Meyer Dedpfowaty Rjx Ab Ujcf Plastic mesh belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional parts.

Condition: excellent (used), functionality: fully functional, Slicing line Schomaker brand Consisting of: 1. Feed belt Plastic belt Belt width: 90 mm Overall dimensions of the feed belt: 1800 mm x 850 mm x 1200 mm 2. Slicer Dcjdpfxowatwie Ab Usf Mesh belt Belt width: 250 mm Working width: 250 mm Overall dimensions of the slicer: 1120 mm x 1500 mm x 1700 mm 3. Output belt Mesh belt Belt width: 250 mm Overall dimensions of the output belt: 2800 mm x 550 mm x 1200 mm

Condition: good (used), functionality: fully functional, Webomatic packaging line, consisting of: 1. Two-chamber vacuum machine Brand Webomatic Model PNC 20A-D-M2 Machine number: 555912033 Voltage 220/380 V, 50 Hz, 3.5 A Seal length: (2x) 800 mm Chamber dimensions: 800 mm x 600 mm Dodpswatw Nsfx Ab Uocf Overall dimensions: 2000 mm x 1100 mm x 1350 mm 2. Shrink tunnel Brand Webomatic Model STP 60/80 D+E Number: 72911302 Voltage 380 V, 3 Ph, 50 Hz, 35 A Dimensions: 1300 mm x 900 mm x 1400 mm 3. Conveyor roller Dimensions: 2000 mm x 700 mm x 800 mm

Condition: used, Year of construction: 2006, operating hours: 43,950 h, machine/vehicle number: LC614, Used KRONES PET complete line for ESL 12000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET ESL applications with UV cap treatment and is aseptic-ready. Engineered around Krones equipment, it delivers consistent performance for 0.5L and 1.0L formats. The line is suitable for industrial packaging and beverage production, especially for sensitive products requiring extended shelf life.Line type: PET ESL with UV cap treatment; aseptic-ready configurationMaximum line speed: 12000 bph (based on 1.0L)Formats: Compatible with 0.5L and 1.0L bottle formatsNeck formats: 38mmContainers: Designed for PET bottle handlingBlow molder: Krones Contiform S8, 8 cavitiesFiller: Krones VODM-PET counterpressure volumetric filler, 32 headsLabeling: Krones rotary labeler with 10 plates (10000 bph) and Krones rotary labeler with 8 plates (8000 bph)End-of-line: Case packer and Fanuc robot palletizer for EuropalletsOperating hours: Approximately 43950 hoursManufacturing year (main equipment): 2006Model references: Contiform S8, VODM-PETAdvanced Automation & Control SystemsThe line integrates modern automation with centralized HMI for recipe management, production counters, and real-time performance monitoring. Automatic valve and pump control supports consistent filling conditions and stable operation at target throughput.Automated production functions with HMI-based controlPerformance setpoint management and production counter visualizationUV cap treatment system integrated for ESL complianceDesigned for hygienic operation and stable fillingQuick recipe selection for 0.5L and 1.0L formatsProduction Line Integration CapabilitiesThis second hand complete bottling line is configured for inline operation from PET preform blowing through filling, labeling, case packing, and robotic palletizing. Conveyors and accumulation ensure smooth product flow with minimal stops.Inline configuration from blow molding to palletizingDual rotary labeling machines to optimize throughput across formatsFanuc robotic palletizer for Europallet patternsFormat changeover between 0.5L and 1.0L with dedicated change partsSuitable for beverage production workflows requiring ESL conditionsMachine Condition & Maintenance HistoryThe line remained in production until December 2025. It is still connected to the electrical network and can be demonstrated running. Overall hours are approximately 43950, reflecting a well-utilized but maintained system typical for industrial packaging environments. No refurbishments are declared, and the equipment has remained in service through recent operations.Operational until December 2025Connected and can be seen runningApprox. 43950 operating hoursCommercially maintained in a productio... Dsdpfsywk Srsx Ab Uecf

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Dcedswucmvjpfx Ab Uef Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Fits up to 10 euro pallets Dcjdpfehbg Uxjx Ab Uof Loaded up with a forklift Reduces physical strain Increases efficiency

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Dsdpfx Aboyx Dwks Uocf Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Year of construction: 2008, functionality: fully functional, Log sorting line 39bins. The price includes dismantling and loading into transport. Dcodpfsyyu H Eex Ab Uef Log lengths 2,5-6.1m

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 87960, total height: 2,700 mm, total width: 2,500 mm, total length: 9,000 mm, overall weight: 5,000 kg, saw blade diameter: 400 mm, input voltage: 380 V, controller manufacturer: WEINIG, WEINIG UNICONTROL 06 window production line - Operating voltage: 380 V - Frequency: 50 Hz - Lateral pressure working width: 30 - 220 mm - Millable profile width: 30 - 220 mm Dcodpfeyu Ir Asx Ab Ujf - Profile height: 30 - 100 mm - Profile length: 2600 mm - Incl. conveyor belt - Belt width: 250 mm - Also includes a lot of various milling heads Attention: The item must be collected between 01 and 10.06.2016, at a date to be agreed. FCA D-75433 Maulbronn – loaded onto truck

Year of construction: 2008, condition: used, functionality: fully functional, TECNOVA 105 RECYCLING LINE with WASHING LINE Re-pelletizing line for plastic recycling with washing line Production 350 kg/h 2 washing tanks in stainless steel Fosha 500 grinder Buffer silo Screw diameter 105 mm Forced feeder Dcedpfx Aboyx D Hfj Uof Double piston filter Degassing unit Hot die face pelletizing system Centrifuge and vibrating screen

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm Dsdpsw I Unwefx Ab Uocf 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: used, Year of construction: 2018, functionality: fully functional, Roll forming machine, trapezoidal sheet roll former for roofing and facade sheets. Manufacturer - CONCEPT STAL Model - T-20 Year of manufacture - 2018 Number of working stands with shafts and rollers - 20 pairs Sheet metal forming/cutting thickness - 0.45–0.6 mm Working width of sheet input - 1250 mm Rotary shears for cutting flat sheet Guillotine for cutting profiled sheet Receiving trolley on wheels Decoiler for sheet coils 5000 kg / 1250 mm with hydraulic expander and inverter - WIEPOFAMA Poznań Line length - 26 m Dodpfxsww Nynj Ab Ujcf Width - 1.8 m Height - 1.7 m Technical documentation (DTR) - available CE certificate - available Machine connected to power supply, ready for inspection.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Dcsdpfx Abow Sfg Ej Usf Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Dcedpfxewu Acko Ab Usf Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers Dcodpewv Trlofx Ab Usf The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. Dcjdpfx Ashzbipjb Uof - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Powder coating line Dodpfx Abjxgnpke Ujcf Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X - Side window opening size for painting: X - Drying oven 3x1m - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V *Installation dismantled and in storage at our premises. Sold as is.

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicatorPallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapperProcess & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters)Inspection & coding: FT System control for volume/cap/label; Hitachi UX printerAdvanced Automation & Control SystemsThe line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability.PLC/HMI: PLC installed for centralized control and recipe managementInspection: FT System for volume, cap presence/position, and label verificationElectrical: 400V, 50 Hz, 16A reference (component level)Coding: Hitachi UX inkjet printer for date/lot markingChangeovers: Designed for multiple bottle formats across PET and glassSafety: Standard guarding and emergency-stop circuits across stationsProduction Line Integration CapabilitiesBuilt for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation.Upstream: Preform conveyor and hopper, Easy Blow 4L blow molderConveyors: Vetromeccanica Eolo air and line conveyor systemsFormat flexibility: 0.33L to 2.0L across PET and glassEnd-of-line: Shrink packaging, handle application, palletizing, and pallet wrappingUtilities integration: Chiller, steam boiler, compressors, air tanks, water... Dcsdpfsyhbibsx Ab Uof