Used Axa Vhc for sale (35)

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travel distances: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul worth €15,000 carried out in 08/2025. Equipment: Swivel head -90 degrees to +90 degrees, indexing at 2.5-degree increments NC rotary table, make: SEMPUCO 400 mm Spindle taper: SK 40, speed range: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through the spindle External coolant Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport – see PDF. Illustration, content, and details are provided without guarantee and therefore not binding. Itodpsyknyfjfx Ab Tec All other accessories visible in the photos and video are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only comprises those accessories which are expressly listed here, in the order confirmation, and in the invoice. FCA (Free Carrier, loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Year of construction: 2003, condition: ready for operation (used), A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible. Expected to be available September 2026. Itjdpfx Absyb Scfs Tec

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Itodpfxjyfriaj Ab Toc Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 850 mm, Travel Paths X-axis: 1760 mm Y-axis: 600 mm Z-axis: 850 mm Vertical distance table – spindle nose: 0 – 820 mm Horizontal distance table – spindle nose: 180 – 1030 mm Spindle & Drives Spindle speed range: 30–12000 rpm Swivel head B-axis: interpolating B-axis travel range: -100 to 100 Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Rotary Table RTA 4-TF-630 Table diameter (vertical rotary axis): 630 mm Itjdpfsydmprjx Ab Tec Weight: 595 kg Tool Changer Tool holder: HSK A 63 Tool pockets: 42 Machine Dimensions Length / width / height: 6850 / 3450 / 3100 mm Weight: 19 t Accessories: – Documentation – Measuring probe

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Isdpfx Abjd Rz Uvs Tetc Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, Equipment: 4 in one shovel, The machine is in very good technical condition, inspection under power possible by prior arrangement. Chip conveyor, high-pressure cooling, CNC control system Sinumerik 840D SL. Ijdjxcu Ewspfx Ab Totc

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration - Control: Heidenhain iTNC 530 - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Iodpfx Aox Hhfbjb Tetc Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 5,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, AXA VHC 2 - 5000M Retrofit Siemens 840C SK40 / 36 tools Table 5000x500mm Coolant 700l Good condition. Can be inspected under power with chips. Ijdjw Tkz Rjpfx Ab Totc

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Ijdjyi Er Aepfx Ab Totc Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 Itodpfxjyk T Eme Ab Toc CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Travel ranges (linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 General technical data Itodpfeyh Nrzex Ab Tsc Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

Condition: ready for operation (used), Year of construction: 1994, operating hours: 3,547,941 h, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis AXA USC-2-M was manufactured in 1994. It features a 4th axis with tailstock and a tool magazine with 22 tool positions, enhancing its versatility. Ideal for complex machining tasks, this universal machining centre represents a significant asset for precision work. Contact us for more information about this machine. • 4th axis with tailstock (special feature) • Tool magazine with 22 tool positions (optional) Additional equipment Itjdpfx Aboyfu Dyo Tsc • Chip tray

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available. Isdpfx Astyymcsb Totc

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355. Itodpfx Ast Dpn Nsb Tec

Condition: used, Year of construction: 2003, Universal CNC machining center Manufacturer: AXA Model: VPC 40 U Iodpfxjwwt Nms Ab Tstc Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel (X/Y/Z): 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 t.

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system, Itodpfx Ajridf Uob Tjc

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Isdpfot Tdp Tox Ab Tjtc Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: good (used), Year of construction: 2005, MACHINING CENTER Make: AXA, Model: DBZ, Year of manufacture: 2005, Control: HEIDENHAIN TNC 520, Spindle speed: 10,000 rpm, 24-position automatic tool changer, Iedpfoygwwxex Ab Tetc Internal coolant supply system 40 bar, Chip conveyor

Condition: used, Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post Isdpfx Abshpu Uqj Totc -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 -Shot dimensions: see photos -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump Itedpfsdpyzrsx Ab Tsc -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine Multi-spindle drilling machine -System without control -1x Spindle machining units -2x sleds Itjdpfx Abjb A I Dxo Tjc -Max. feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Ijdpfxegypgdj Ab Totc

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Itedpfx Abefh R N Do Tec Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Itedpfx Aorvz A Sjb Toc Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Ijdpett Abmofx Ab Tetc Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website