5
Travels : x-axis 3.500 mm
y-axis 500 mm
z-axis 600 mm
spindle support AXA Maxima
speed 60 - 6.000 rpm
Bqzqftl
places in changer 36
table size 4.600 x 500 mm
control HEIDENHAIN 426/430
PENDULUM MACHINING POSSIBLE
3
Rotational speed: 22,000/min, number of tool slots: 22, connected load: 55kVA.
Ozbgl
6
X-travel: 2240/ 2x 950mm, y-travel: 500mm, z-travel: 600mm, connected load: 28kVA, controls: HEIDENHAIN TNC 430, operational hours: ca. 14,000h.
Bfwfw9h8ao
6
We offer you:
Main spindle head from the dismantling of an AXA VSC
AXA recording
condition: used / ready for use
very good condition
Baysfcrnvc
You receive a 14-day "function/commissioning guarantee" on all articles.
Should an article be defective contrary to expectations, we will provide a replacement (if available) or refund the full purchase price.
12
2x tool changer 12 times
SK40 recording
comes from an AXA VSC / DBZ
Can be mounted on the right and left side of the machine table
therefore maybe also interesting for other machines!
Blieh0oe
condition: used / ready for use
Express delivery is possible at extra charge.
You receive a 14-day "function/commissioning guarantee" on all articles.
Should an article be defective contrary to expectations, we will provide a replacement (if available) or refund the full purchase price.
11
from a machine disassembly:
Moving changeover contact from AXA VSC
Cxjy93po
16 tool places (one holder is missing)
Drawing number: Q 884210a
fine condition
Scope of delivery see pictures
condition: used / ready for use
You receive a 14-day "function/commissioning guarantee" on all articles.
Should an article be defective contrary to expectations, we will provide a replacement (if available) or refund the full purchase price.
8
x-travel 1600 / 2 x 500 mm
y-travel 300 mm
z-travel 300 mm
Control Heidenhain
total power requirement 20 kW
weight of the machine ca. 4,5 t
dimensions of the machine ca. 4 x 3 x 2,7 m
D8i9sep
9
General Data
Measurements width 4800 mm
Measurements depth 2400 mm
Measurements height 2800 mm
Machine weight 7500 kg
Control Unit
Brand Heidenhain
Model TNC 407
Main Drive
Number of axis 4
B2w0kwlvjb
Movement
X-Axis Movement 3000 mm
Y-Axis Movement 500 mm
Z-Axis Movement 480 mm
This AXA VSC 2 Milling Machine was manufactured in the year 1999 in Germany. It is equipped with a Heidenhain TNC 407 control unit. This 4 axis machine counts with various SK40 holders, also a dividing head and swive...
5
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump
Bamedsdhno
-Motor: 0.25 kW 1410 rpm
-Max. Pressure: 110 bar
-Max. Liter output: l/min
-Hydraulic tank
-Pressure relief valve: 1
-Valve: 1
-Dimensions: 350/250/H435 mm
-Weight: 32 kg
7
Vertical machining center make AXA type VSC 0 - 3000 M
machine # 84983, year of manufacture 1990
Technical data:
X-axis stroke 2 x 1200 mm / 3000 mm
Y-axis stroke 300 mm
Z-axis stroke 300 mm
Tool holder ISA 40
Ccppdqhd2s
Tool changer for 30 tool holders
Speed range 0 - 6000 rpm
rapid traverse 0 - 15 m/min
feed rate 1 - 10.000 mm/min
drive power 11,2 kW
outer dimensions approx. 5400 x 2100 x 2900
weight approx. 6,5 t
with
- CNC control HEIDENHAIN TNC 355
- ball screws
used, in good condition
3
x-travel:2360 mm
y-travel:600 mm
z-travel:1000 mm
table surface area:2500 x 640 mm
control:TNC 430 A HEIDENHAIN
spindle turning speed range:8000 1/min
spindle motor:35 kW
spindle taper:SK 40
tool change unit:76 ( 2x 38 ) Pos.
:69 kW
dimensions:5,5 x 2,4 x 2,9 m
weight of the machine ca.:14 t
traveling column m/c (two table machining possible)
incl. 2 pcs. NC-dividing devices (left / right side), dia. 300mm,
Cri23gkhc
chipconveyor
el. handwheel
coolant box and paper filter
new monitor
approx....
7
Item number MA1144
Manufacturer AXA
Type VSC 2 M
Year of manufacture 1995
Machine-No. 84912
control Philips CNC 3460
length [mm] 4700
width [mm] 2450
height [mm] 2800
weight [kg] 8500
Connected load 3890 V / 63 A
travel range X/Y/Z [mm] 2840mm / 620mm / 620mm
Number of tool stations [pcs.] 30
Gear [rpm] 4000
Tool changer Yes
Fn80dqp
Tool holder SK 40
Accessories The machine was overhauled in 2021 for 8500€ / rotary axis, manuals, circuit diagrams, operating instructions, programming instructions...
6
Good condition
X axis 3800mm
Qeagcq0n
Z axis 300mm
4
Hydraulic power pack from AXA VSC
Factory No. 89920/89/7/6
Power 110 bar
Cay2jf7lg2
Condition: used / used
The machine is in good condition.
Three years ago a new milling spindle was installed.
AXA VSC -3 M
clamping tables: 2 x 1350mm
with 18 T-slots
year of construction: 1999
control: Heidenhain TNC 426
electr. handwheel: Heidenhain HR 410
main spindle: 15KW
IKZ: 20bar
tool changer: 36 times
SK 40
speed range: 40-4700 1/min
total connected load: 55KVA
travels:
X-axis: 2600mm/2x1050mm
Y-axis: 700mm
Z-axis: 700mm
A link to the videos with dial gauge on all axes is available on request!
Cooling: extern...
9
X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw ,
BLUM - Werkzeugbruchkontrolle ,
Späneförderer , Bandfilteranlage
Bmmhupr7
4
X-travel: 2350mm, y-travel: 375mm, z-travel: 500mm, table dimensions: 2730x500mm, spindle cone: SK40, max. rotational speed: 4000/min, controls: HEIDENHAIN TNC 355.
Bqjl0yydu0
4
Machine comes from the AXA factory in Schöppingen and was delivered in August
2017 to our customer in completely overhauled condition.
Since the general overhauling our customer only used it for approx. 400 hours
Control: Siemens 840 D Powerline
Control On: Approx. 12121 hours
Travel X: 1200mm
Travel Y: 520mm
Travel Z: 600mm
Distance table - spindle nose: 180-780mm
Clamping area: 1,350x500
Cyhwerys
max. table load: 800kg/m²
Tool holder: SK40
Tool slots: 22
Spindle power: 30kW at 40% ED
Spin...
10
Control SIEMENS 840 D
x-axis 6000 mm
y-axis Y1= 4600 / Y2= 3400 mm
z-axis Z1 / Z2 = 1000 mm
rotary table diameter 4000 mm
circular table speeds 60 U/min
table load 50 t
max. torque on the faceplate 46000
Bi2oonukwr
spindle turning speed - stepless 30-7500 U/min
column: max. dist. table - spindle nose 1800 mm
distance between columns 4300 mm
table width 2500 mm
table length 4200 mm
total power requirement 125 kW
weight of the machine ca. 112 t
dimensions of the machine ca. 14,4 x 10 x 5,5 m
...
7
Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post
-Manufacturer: AXA, quick-change tool holder Multifix D1H 63180
-Shot dimensions: see photos
-Clamping length: 180 mm
-Dimensions: 180/95/H185 mm
-Weight: 8.3kg
P7wtn
8
x-axis 8000 mm
y-axis 3500 mm
z-axis 1150 mm
Control SIEMENS 840 D Pl
rapid travel x/y/z 15.000/15.000/10.000 mm/min
spindle turning speed range 30-4000 U/min
spindle drive - main spindle 40 kW
Torque 191 Nm
tool taper SK 40 DIN 69871A
toolpiece magazine: chain magazine 50 Stück
internal coolant system feed 20 bar
Pwqz3q
** 2-axis sviweling head - A + B- axis with 2,5° Hirth-gearing **
2009/2010 folgende revisions were done:
old CNC control Siemens 840 C renewed with Siemens 840D Pl
...
11
Control Unit
Brand Heidenhain
Main Drive
Spindle speed range 6000
Spindle motor power 17 kW
Tool taper HSK 63
Movement
X-Axis Movement 2600 mm
Y-Axis Movement 700 mm
Z-Axis Movement 800 mm
Gn8jf0cvk
Table
Outer length 3060 mm
Outer width 800 mm
Media
Chip conveyor Yes
This AXA VHC 3M/2E Milling Machine was manufactured in the year 2003 in Germany. It is equipped with a Heidenhain control unit. This 3 axis machine works with a spindle speed up to 6000 rpm and a spindle power of 17 KW. Includ...
x-travel: 500 mm
y-travel: 320 mm
z-travel: 400 mm
control: Siemens Sinumerik 810M/GA30
tool taper: AXA Direkt Stirnaufnahme
spindle speed:: 30-6000 U/min
table-size: LxB: 800x420 mm
table surface area: LxB: 600x420 mm
tool turret: 12-fach
total power requirement: 18 kVA
weight of the machine ca.: 3,3 t
dimension machine xH: 3,0x1,9x2,5 m
Machining Center 4-axis via rotary table (index head) A-axis 360°
- swarf conveyor ( hinged belt conveyors ) ejection height=650mm
- coolant device
- index he...
10
- - - - - travels - - - - - - - - - - -
travel -x axis 6.000 mm
travel -y axis 4.600 mm
travel -y axis 3.400 mm
travel -z1 / z2 axis 1.000 mm
- - - - - Clamping areas - - - - - - - - - - -
rotary table diameter 4070 mm
circular table speeds 60 U/min
max. weight capacity of rotary table 25 t
table dimension (L x W) 4.200 x 2.500 mm
table load 50 t
distance between columns 4.300 mm
- - - main spindle - - - - - - - - -
spindle turning speed - stepless 30 - 7.500 U/min
capacity at 100 / 40 % 19,0 / ...
14
Ref. -No.: 10201
Brand: AXA
Type: VHC-2-5000 XTS
Year of construction: 2007
Type of control: CNC
Control: Siemens 840D
Storage location: Halberstadt
Country of origin: Deutschland
X-Travel: 5000 mm
Y-Travel: 600 mm
Z-Travel: 800 mm
Machine length: 9400 mm
Machine width: 3500 mm
Machine Height: 3300 mm
Table Dimensions (Lengthxwidth): 6325 x 1050 mm
Swivelling: +/-90 °
Ccxcgqkfdi
Numbers Of Tools In Magazin: 120
Turning Speeds: 30-9000 RPM
Tool changer: SK 50
Drive Capacity - Spindle Motor: 45 ...
9
Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post
-Manufacturer: AXA, Multifix D1D 50180 quick-change turning tool post
-Shot dimensions: see photos
-Clamping length: 180 mm
-Number: 3x holder available
-Price per piece
Cldowg2a
-Dimensions: 180/80/H185 mm
-Weight: 6.4 kg/pc.
15
Manufacturer: AXA
Note: DBZ
Table size: 1000 x 500 mm X 2 pcs.
X: 750 mm
Y: 500 mm
Ccoj8mtug3
Z: 600 mm
7
X-Achse: 2300 mm
Y-Achse: 1200 mm
Z-Achse: 600 mm
SK 40
60-fach WZW
Steuerung Heidenhain TNC 430
Drehzahl: 30-10.000 1/min
CNC-Rundtisch 1100 x 1100 mm
Schwenkkopf Teilung 2,5°
Px0dr
Elektrisches Handrad
Bandfilteranlage
Späneförderer
Automatische Schiebetüren
2 Handpistolen
Tischerhöhung um 150 mm
2
AXA
Tool holder, for extension of chain magazine
36 places available
I am a former AXA - fitter
Bvbfeue8
and could expand for you.
Do you have still place in the chain magazine, I am
I am the right person
12
X 7.000mm Y 900mm Z 950. Spindle new 2019 15.000Rpm HSK 63. ATC 36 pos. Tilting spindle +/- 100dg. 4-axis rotary table AXA RTA 2-300.
Cooling trough spindle 10 bar. Paper filter. Hedenhain iTNC530.
H2tkajah
Delivery September.
3
CNC Vertical Traveling Column Machining Centre with 4th Axis.
Table size 2380 x 500 mm.
Movement x-Axis 1760 mm.
Movement y-Axis 500 mm.
Movement z-Axis 780 mm.
Max table load 800 kg.
Number of tools in magazine 36 pieces.
Maximum spindle speed 10.000 1/min.
Tool taper DIN 69871A-40.
CNC control Heidenhain TNC 430 M.
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview...
9
Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post
-Manufacturer: AXA, Multifix D1D 63180 quick-change turning tool post
-Shot dimensions: see photos
Thkhk9q
-Clamping length: 180 mm
-Number: 2x holder available
-Price per piece
-Dimensions: 180/90/H200 mm
-Weight: 7.4kg/pc.
5
The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress.
They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power.
They are also equipped with a pressure relief valve with mechanical block to prevent overpre...
15
Table dimension 2700x1100 mm
X way :2400 mm
Cas2t2xetx
Y path : 1200 mm
Z path 800 mm
UNDER STROOM
8
AXA VHC-3-M/E
Number of controlled axes: 5
travels:
X-axis: [mm] 2,600
Y-axis: [mm] 700
Z-axis: [mm] 800
B-axis +-90° 0.001
C-axis 360
Rapid traverse: (X/Y/Z) [m/min.] 25/25/25
Swivel head Swivel head -90°/+90°, pitch 2,5° ° / Swivel head -90°/+90°, pitch 2,5 °
Tool holder: SK40
Tool changer
Tool positions: 36
tool length: [mm]
tool diameter: [mm] 110/180
By22yyuew0
NC rotary table Ø 800 mm,
table size: [mm] 2600 x 1.050
connected load: [KW] 55 kVA
machine weight: [kg] approx. 16.000
Y2yzaoif
Sp...
3
Manufacturer: AXA, type: VCC50, year of manufacture: 2018, read operating hours (h): 6,332,
serial no.: 87844, travels (XxYxZ): 720x520x600
Canu0iulmb
mm, B-axis, additional C-axis (conversion to A-axis theoretically possible),
rapid traverse (X/Y/Z): 25/25/20 m/min, clamping table area: 2,050x850 mm, max.
table load: 800 kg/m², 5 tN, tool changer 22-fold, tool holder SK
50, max. tool length: 400 mm, max. tool weight: 15 kg, max.
feed force: 9,000 N, main spindle: 6,000 rpm, spindle arrangement:...
13