Used Axis Card for sale (11,218)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Guodpszbqy Nofx Akyoc Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Gedpfxjzck U Aj Akyjuc Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: used, machine/vehicle number: 008355, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Gsdpfoygr Urex Akysuc Total number of tool changer positions: 16

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, Gedpfx Akeyzza Isyjuc chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Gujdjy H Dzfspfx Akyoc Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: used, Keba central processing unit Gusdpfx Aerr Ehxekyjc - removed from Engel ES 500/150 HL - removed from running machine - fully functional manufacturer: Keba type: CU 211/A spare part no.: 22 manufacturer no.: 21876 Dition: gebraucht

Condition: used, B&R 2005 CP152 / 10010792 / CP152.9 - compatible with all B&R 2005 controls - housing intact or renewed - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 spare part no.: 10010792 manufacturer no.: CP152.9 Gedpfxjimw Suj Akyouc Dition: gebraucht

Condition: used, Sigmatek DIAS wire plate version 2- compatible with NC4 control - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Sigmatek spare part no.: manufacturer no.: Dition: gebraucht Gsdpfx Akjrr Egzsysuc

Condition: used, Keba analogue measurement + control module AR101- overhauled Gjdpow Ah Rpefx Akyjuc - 3 months warranty - removed from running machine - fully functionalmanufacturer: Keba type: AR101 manufacturer no.: 220405 spare part no.: 2203 64293 months warranty: This is provided exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH.

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 Gedpop Rb Hcefx Akysuc manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C2001.18 spare part no.: BR177 Guodpfsiyzv Sex Akysc If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Sigmatek IPC Pentium 300CF- removed from Krauss Maffei KM 18 C3 - removed out of running machine - fully functionalmanufacturer: Sigmatek type: 300CF spare part number: 5 Gsdpfx Aoltrptekysuc Dition: gebraucht

Condition: used, B&R 2005 CPU260 interface processor- housing intact or renewed - compatible with all B&R 2005 controllers - removed from K-Tech 200 - removed from running machine Gujdpfep Rb E Rsx Akyec - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R type: B&R 2005 manufacturer no.: 3CP26 spare part no.: 10079382 Dition: gebraucht

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R type: CP152 Gujdpfeyxg Tusx Akyec spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 Gedpfjyxg Tnjx Akyeuc manufacturer no.: 3NC150.6

Condition: used, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - removed from an operational machine Gsdpfsw Ah N Sox Akyjuc - fully functional Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer No.: 054202

Condition: used, B&R 2010 DO430 digital output - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional Guedpfew Ah Nxex Akysc manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 manufacturer no.: 2DO430.6

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 Gusdpfx Asw Ah N Eskyoc manufacturer no.: 054943

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Gjdow Ah Nrepfx Akyjuc

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 Godpfx Aew Ah Nlokyouc manufacturer no.: 054943

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Godpfx Akew Ah Nfeysuc - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 manufacturer no.: 054492

Condition: used, Sigmatek DEZ 181 / DIAS VDMA interface- compatible with NC4 control - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Sigmatek type: DEZ181 spare part no.: Guodpfxerr Efko Akysc manufacturer no.: D Dition: gebraucht

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, fuel: electricity, Equipment: chip conveyor, KONDIA Five 400 5-axis continuous machining center from 2008 with X 850 mm, Y 500 mm, and Z 610 mm travels, HEIDENHAIN TNC 530i control with 5-axis kinematics, workpiece probe, tool gauge, Heidenhain 3-axis linear scales, ATC 40 SK40 tools and 12,000 rpm, 20 Bar CTS tool coolant and chip conveyor Gjdpfx Akjh Elp Esyeuc

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder Gsdpfszavqwex Akyeuc CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Guedpfezauxgex Akysc