Used Axis Card for sale (12,335)

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Kodoxuqw Hepfx Adwsdw Make: DMG MORI Type: CTX BETA 800 4A Control: Siemens 840 D-SL Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1260958, This is a Zollern 101 linear axis for KUKA KRC2 robots of the KR150 to KR240 series. Year of manufacture: 2012. The linear axis is equipped with two carriages and has an overall length of 4.80 m. Kedpsxvzybsfx Adwodw

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Kdodpfxoxur Sxe Adwow Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm Kdodpfx Adsxlip Aswsw • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Kdodjwz I Acopfx Adwew Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: excellent (used), Item Description: Kodoxn Itfepfx Adwedw LANG Technik Art. 65610 Axis / Fourth Axis ----- Item Condition: Item comes from a company liquidation. In good used condition. 100% functional! Internal number: ZK14

Condition: ready for operation (used), Year of construction: 2000, Available immediately from Swiss toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Kdsdpjxxuyajfx Adwew Table: 400 x 280 mm Table load up to 100 kg Travels X/Y/Z: 350/240/340 mm Infinitely variable spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servo drives for X/Y/Z axes Rotation range: 360 degrees Table clamping plus 105° / minus 150° Weight: 2 tons Includes holders, hydraulic vice Price: EUR 5,500 plus VAT ex location.

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder Kdedpfx Ajfnldqsdwjw The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: good (used), Temperature Card ARBURG Dialogica 7204-3504C1 SN 126.642 yPIII Kdedpfsmxk D Sex Adwow function tested

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: Professional 5, workpiece height (max.): 500 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 29,000 mm, overall weight: 15,700 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 323, tool length: 300 mm, tool diameter: 70 mm, tool weight: 8,000 g, CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 Kdedpfx Adovfmlrswjw C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 20000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Matrix Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Helical interpolation Custom Macro common variables (100) Machine running times Spindle Working: 0h (Retrofited) Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: used, functionality: not functional, incl. some tool holders incl. live driven tool holder Full C-Axis 360.000 Ksdpfx Aextbqnedwjdw Chip conveyor Problem on Turret Revolver live tools Max. turning Ø: 430mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 50.8mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:5000Rpm Length: 3400mm Width: 1900mm Height: 2700mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, Nikken 4th Axis Head, Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Specification: X Axis Travel 500 mm Y Axis Travel 400mm Z Axis Travel 350mm Table Size 650 x 400mm Table Load 250 Kgs Spindle Taper BT-30 Max. Speed 10,000RPM Motor Power 7.5 KW ATC Tool Capacity 21 stations CNC Control Fanuc 16i-MB Rapid Traverse 54 m/min Machine Weight Approximately 2,000 kg Kdedpfx Asxqdvujdwow Control: Fanuc 16i MB Spec: Travels 500mm x 400mm x 330mm 10,000 RPM Accessories: Nikken 4th Axis Head, Zero Point sub plate, machine vice

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Kedpfxoxpw Rve Adwsdw Haas TR210 5 axis trunnion table

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Kdjdpfxoxt D Eze Adwjw Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Condition: used, Year of construction: 2006, Make: FANUC, Model: M-710-IC70, Year: 2006, Serial No.: R06926863, Control: Siemens, Operating panel, Control cabinet, System type: R-J3iC, Year: 2006, Serial No.: E06804051, Safety enclosure 5,000 x 4,000 mm, aluminium frame construction, plexiglass housing. Kdedpfexuhxzox Adwsw

Condition: ready for operation (used), Year of construction: 2005, Offered is a Geiss 5-axis CNC milling machine. Travel ranges X/Y/Z/B/C 3000mm/1200mm/750mm/365°/520°, spindle GEISS ER45, max. speed: 40000rpm, power: 6kW, total weight approx. 5000kg, dimensions X/Y/Z approx. 6000mm/3700mm/2700mm. The machine is equipped with a detachable noise protection enclosure. Viewing by appointment possible. Kjdexxbagepfx Adwsdw

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Kjdpfx Aoxtnikjdwedw Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Kdodjxrr I Iepfx Adwew Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: excellent (used), Year of construction: 2004, MAZAK INTEGREX 200-III ST 5 Axis Turning Centers Lathe, s/n 174623, w/ MAZATROL 640MT Pro Control, 40” Center Distance, 2.5” Bar Capacity, 26” Swing, 26” Turning Diameter, Travels: X-22.83”, Y-6.3”, Z-41.14”, B Axis Head Tilt: 225°, C Axis Index: 0.001°, 5,000 RPM Spindle Speed (Main/Sub), Live Tooling, 12,000 RPM Live Tooling Spindle Speed, 40-ATC, KM63 Taper, Sub Spindle, Oil Matic Oil Temp Regulator, Chip Conveyor Ksdpfxou A Dgls Adwedw

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Kodpfxjxt D Ebo Adwsdw Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Kdjdpfsxpil Sex Adwew Tool Setter Spindle Probe

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Kdsdpoxva Ahjfx Adwjw Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm Kodpfx Adeu A Dnpewjdw T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kdodpoxt D D Rjfx Adwow Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.

Condition: excellent (used), Year of construction: 2012, Eismo - Ergonomic model 290.250 DGA - 2-axis automatic band saw 2 working axes Kjdeupht Ispfx Adwodw Siemens Simatic numerical control roller infeed conveyor (6 m x 0.65 m) with 2 new saw blades Excellent condition Location - Poland