Used Balancer for sale (796)

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life. Lodpfx Ajva Nq Heacorw

Condition: used, This listing is for a Sartorius 36201S Balance 100G-15000G The unit is in full working condition and is ready for immediate release. Because of the large capacity (36 kg) but still good readability (0.1 g), this balance is need to be weighed, yet you still need granularity at the 0.1 g level. Examples: bulk materials in labs, industrial weighing in R&D, weighing heavy vessels/totes, formulation where fairly fine resolution is required. Not suitable for ultra-micro weighing (µg or mg) — it’s not an “analytical balance” in that sense, but rather a high‐capacity precision/industrial balance Maximum weighing capacity: 36,200 g (i.e., 36.2 kg) according to the data sheet for model “36201S”. Readability (i.e., smallest displayed increment): 0.1 g (100 mg). Weighing pan size: 400 mm × 300 mm (width × depth) for the high-capacity models. Repeatability (typical deviation) < ±100 mg for this model. Linearity deviation < ±200 mg. Off-centre loading (eccentricity) specification: 300 mg at test load of 10,000 g. Lodpsxv Svtjfx Aacjrw According to one listing the version “MCE36201S0-S00” is described as 36.2 kg capacity, 0.1 g readability, external calibration. According to another listing: “Maximum capacity 36200g – Readability 100mg – Weighing surface 400×300mm – Stainless steel” for version MCA36201S-2S00-O. Minimum weight (optimal) is noted as ~82 g (under USP 41 guidance: “820 d” rule) for this model class

Condition: used, Year of construction: 2004, gebraucht 2004 050078 Jänner 2026, Zwischenverk Taiwan 19700 € 1 810 mm 630 mm 800 x 400 mm 800 x 400 mm 850 mm 900 mm 5 - 25 m/min 3 - 32 mm 405 mm 0,001 - 0,04 mm 1450 1/min 3,7 kW 3350 mm 1730 mm 1930 mm 2900 kg 355 x 50 x 127 mm Automatic vertical feed Electro-magnetic chuck 1 NEW grinding wheel flange 1 NEW grinding wheel Coolant system with paper filter Automatic dressing device above the grinding wheel with NEW diamond NEW balancing stand Lrsdpfsxvivdjx Aacsw NEW covers for the cross guides Operating manual in English with EC declaration of conformity

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. Ljdpfx Asmt Atdsacorw The SmaRT advantages: • Easy operation with the aid of navigation and function buttons, • Large illuminated colour display, • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Ledpfx Aswrtbxeacerw Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, total height: 2,400 mm, total length: 4,445 mm, total width: 2,100 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 550 mm, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 5,800 kg, grinding spindle speed: 1,450 rpm, Table clamping surface: 1000 x 500 mm Table load max. 1000 kg (incl. magnetic clamping plate) Distance table to spindle center 550 mm Sanding spindle motor 5.5 kW Sanding spindle speed 1450 rpm Guide system Flat guides Machine weight approx. 5800 kg Operation/control: Servo-controlled vertical infeed in the sanding cycle Electrical cross travel with memorizable reversal points via control panel Electronic handwheel Movable control panel with 7" color screen and touch function Programmable sanding cycles in 4 variants for vertical axis Workpiece memory, 10 sanding cycles for quick recall Including the following standard accessories: Full enclosure open at the top Separate hydraulic system Infinitely variable longitudinal table movement with automatic table reversal Quick vertical adjustment for the sanding head 300 mm/min (rapid traverse) Automatic stepless vertical infeed from 0.001 - 0.025 mm via servo motor Adjustable magnet incl. clamping force monitoring Automatic central lubrication with visual inspection 1 balancing device for grinding wheels, incl. balancing mandrel 1 grinding wheel flange for grinding wheel bore 127 mm 1 grinding wheel 355 x 38.1 x 127 mm 1 Table dresser 1 Rear splash guard 1 Set of leveling screws for alignment and machine feet 1 Operating instructions incl. wiring diagram 1 acceptance report for machine geometry and grinding spindle according to DIN 8632 Optional: Fine-pole electromagnetic clamping plate 1000 x 500 mm Coolant tank (max. 135 L) with magnetic separator and paper belt filter Lrodpfx Aajcm Axuocsw Manual dresser with hand lever

Condition: excellent (used), Year of construction: 2021, Vertical single-spindle turning center, vertical lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for driven tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Nominal speed: 3,200 rpm Tool holder unit for driven tools: 12 x BMT75 Rotary workpiece transport system, O-version Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band for workpiece diameter: 150 - 400 mm Blow-off of workpiece and clamping device (pick-up) Coolant supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water - air) A cooling unit (with 2-circuit technology) regulates the machine’s thermal balance. Lredpfx Ajvq Iwyeacsw Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filtering fineness 100 μm, with electronic and mechanical contamination indicator Chip conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with probe Blow-off for probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal light Axial drilling-milling head – BMT75 CC 5x angle drilling-milling heads 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Gr.150 - with 1 media feed-through Max. clamping force 10,850 daN at 70 bar Coolant through spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change max. = 2,200 rpm (reference speed as per DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Rinse nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 finishing external 1x 8.BMT25VL8IKX50 roughing external 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping adapter 1x 40.75V5KRVL8IKD facing head 50mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill diameter 20mm 1x 42.V522L08Ik drill diameter 22mm 1x 27.V514WNL31 drill diameter 14mm Software package Operating manual / Maintenance manual

Condition: used, This listing is for the Sartorius YDP10 Analytical Balance + YDP20 Printer The unit is in full working condition and is ready for immediate use Overview & Core Features Purpose & Use The YDP10 is a dedicated data printer designed to pair with Sartorius analytical balances, enabling seamless generation of hard‑copy records with a focus on accuracy and regulatory compliance (GLP/GMP) Ramo TradingManuals+. Ljdpfx Ajxv Du Ieacerw Connectivity & Power It connects to compatible balances via RS‑232C interface, with the necessary cable typically included. Notably, the printer draws power directly from the balance, eliminating the need for a separate power adapter QuestPairMachinio. Printing Capabilities The unit supports 57.5 mm thermal or dot‑matrix paper rolls, making it easy to load and maintain. It boasts fast print speeds and supports both manual single‑print and automatic result transfer modes QuestPairManuals+. Display & Controls Features a high‑contrast LCD screen that shows information like date, time, and transaction count. You can also activate a built‑in real‑time clock and a transaction counter for sequential numbering . Built‑In Functionality Includes a statistics program, allowing aggregation and analysis of weighing data directly on the device

Condition: used, mileage: 174,426 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 2,800 kg, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, first registration: 07/2011, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, CO₂ emissions: 190 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2011, total length: 4,892 mm, construction height: 1,970 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI with Parktronic and Euro 5 standard is a versatile van, ideal for commercial use. The vehicle, first registered on July 7, 2011, has a mileage of 174,426 km and still has a lot of potential for everyday use. Powered by an economical 2.0-liter diesel engine with 62 kW (84 hp), it offers a balanced ratio between performance and efficiency. The transporter has a 5-speed manual transmission and meets the Euro 5 emissions standard, making it environmentally friendly. The vehicle is presented in the striking color broom yellow R1032 and offers various loading options with its two side sliding doors and the rear wooden panel. The green environmental badge underlines its environmental compatibility. It has a permissible total weight of 2,800 kg and a transport capacity due to its dimensions of 4,892 mm in length, 1,904 mm in width and 1,970 mm in height. The wheelbase is 3,000 mm, which ensures stability and good driving comfort. The interior is designed for functionality and offers space for three people. The van has only been used by one previous owner and its condition is described as used but technically reliable. Thanks to the truck registration, the vehicle can be used for various commercial purposes. Optional delivery within Germany is possible for an additional charge. Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved. Lsdpotz Up Tefx Aacorw

Condition: used, This listing is for the Gilson Pipetman L P10mLL 1-10ml The unit is in full working condition and is ready for immediate use The Gilson Pipetman L P10mLL is a precision liquid handling instrument designed for laboratories requiring reliable and ergonomic pipetting in the 1–10 mL volume range. Ideal for both routine and high-precision applications, this pipette features advanced design enhancements for improved comfort, control, and durability. Key Features: Adjustable Volume Range: 1–10 mL for a wide variety of applications Plastic Tip Ejector: Corrosion-resistant, ideal for working with harsh or volatile chemicals Ergonomic Design: Lightweight and balanced to reduce fatigue during extended use Volume Locking System: Prevents accidental volume changes during pipetting Fully Autoclavable: Ensures sterility and easy decontamination 2D Identification Code: Laser-marked DataMatrix for traceability and inventory management Lrsdpfx Aoxv Drtsacsw Exceptional Accuracy and Precision: Built to meet ISO 8655 standards Applications: Cell culture and media preparation Buffer and reagent transfers Clinical, research, and industrial laboratorie

Condition: used, mileage: 120,925 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 2,800 kg, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, first registration: 07/2011, next inspection (TÜV): 07/2025, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, CO₂ emissions: 190 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2011, total length: 4,892 mm, construction height: 1,970 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers reliable performance with a 2-liter diesel engine that delivers 62 kW (84 hp). The vehicle is equipped with a 5-speed manual transmission and meets the Euro 5 emissions class. With a combined fuel consumption of 7.2 liters per 100 km, this van offers balanced fuel efficiency. CO2 emissions are 190 g/km, which results in a green sticker. The T5 Transporter is ideal for commercial use and has practical features such as two sliding side doors and a wooden panel in the cargo area. The vehicle was first registered in 2011 and has a mileage of 120,925 km. The TÜV sticker is valid until July 2025 and the van has space for three people. The vehicle is used, has only one previous owner and is available in the striking color broom yellow R1032. The dimensions of the vehicle are 4,892 mm in length, 1,904 mm in width and 1,970 mm in height, with a wheelbase of 3,000 mm. The permissible total weight is 2,800 kg. Viewings are possible without an appointment. Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved. Lrsdpetfbcljfx Aacjw

Condition: used, This listing is for the Troemner 4KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 4 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Ledpfx Aajxv Dpfscerw Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. .

Condition: used, mileage: 575,445 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 2,800 kg, empty load weight: 1,813 kg, maximum load weight: 987 kg, first registration: 12/2010, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, CO₂ emissions: 190 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2010, total length: 5,292 mm, construction height: 1,970 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter, built in 2010, is a used panel van with a mileage of 575,445 km. It has a 2.0 TDI diesel engine with an output of 62 kW (84 hp) and a displacement of 1,968 cc. The emissions class corresponds to Euro 5 and the Lrjdpfxstfa Rlj Aacew CO2 emissions are 190 g/km. The van has a 5-speed manual transmission and offers space for three people. In terms of equipment, the T5 Transporter is functionally equipped. It is equipped with sliding doors on both sides, which allow flexible access. The wing doors in the rear area make loading easier. The vehicle also has Parktronic, which makes parking and reversing easier. The interior is equipped with a robust wooden panel in the loading area, ideal for demanding transport tasks. With dimensions of 5,292 mm long, 1,904 mm wide and 1,970 mm high, the vehicle offers a good balance of usable space and maneuverability. The approved total weight is 2,800 kg. Combined consumption is 7.2 l/100 km, which is efficient for a vehicle of this size. The used van is available in broom yellow (R1032) and has a truck registration. It offers a practical solution for commercial users who value reliability and functionality. Sold only to commercial users (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, This listing is for the Troemner 2KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 2 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. Lrodpfexv Dn Ujx Aacow .

Condition: used, This listing is for the Sartorius ydp3 0Printer The unit is in full working condition and is ready for immediate use Lredpjxv Dk Aofx Aacow The Sartorius YDP30 is a compact, high-performance thermal printer designed for laboratory environments, particularly for generating GLP-compliant printouts from Sartorius balances such as the Practum, Quintix, Secura, MA37, and MA160. It supports both thermal transfer and direct thermal printing methods, offering flexibility for various labeling needs

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: Lredpfx Aasxv Di Sjcjw PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Dispensing: Timed and manual dispensing Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: used, This listing is for theOhaus Harvard trip 1400/1500 series scales The unit is in full working condition and is ready for immediate use OHAUS Harvard Trip 1400/1500 Series Scales Lodpfjxv Difjx Aacerw The OHAUS Harvard Trip 1400 and 1500 series are precision mechanical beam balances ideal for comparative and direct mass measurement. They operate on the Roberval principle, maintaining accuracy regardless of pan placement, and feature durable construction suited for education, laboratory, and industrial settings.

Condition: used, This listing is for the Sartorius LA420Ss balance The unit is in full working condition and is ready for immediate use The Sartorius LA4200S is a high-precision top-loading balance from the renowned Masterpro Series, designed for laboratory environments requiring accurate and reliable measurements. With a blend of advanced features and robust design, it is ideal for quality-focused applications. Masterpro Series Highlights The Masterpro Series from Sartorius offers precision balances for mass measurement with capacities ranging from 0.1 mg to 64 kg. These balances include a broad range of high-performance features, making them particularly suitable for use as measuring and test equipment within ISO or GLP quality management systems. Key performance features include: Ljdoxv Dg Djpfx Aacsrw isoCAL: Fully automatic self-calibration and adjustment function, triggered by time or temperature changes. reproTEST: Enables quick determination of standard deviation to verify the reproducibility of weighing results. ISO/GLP Printouts: Supports traceable documentation with compliant output. Menu Lock: Password-protected settings for secure operation. Masterpro balances meet the highest standards for accuracy and reliability, thanks to: Advanced Vibration Filtering: Ensures stable results even in challenging environments. Stable and Reproducible Output: Critical for consistent data quality. High Visibility Display: Excellent readability in any lighting conditions. Durability: Engineered with a rugged weighing system for long-term use.

Condition: used, This listing is for the Sartorius ydp3 0Printer Lrodpfx Asxv A Tpjacew The unit is in full working condition and is ready for immediate use The Sartorius YDP30 is a compact, high-performance thermal printer designed for laboratory environments, particularly for generating GLP-compliant printouts from Sartorius balances such as the Practum, Quintix, Secura, MA37, and MA160. It supports both thermal transfer and direct thermal printing methods, offering flexibility for various labeling needs

Condition: used, This listing is for the Ohaus Scout Pro Portable balance Sp4 The unit is in full working condition and is ready for immediate release The Ohaus Scout Pro SP4001 is an intuitive, durable portable electronic balance designed for a wide range of laboratory, industrial, and educational applications. This balance is easy to operate with minimal instruction and offers advanced features for precise and reliable weighing. Key Features: Lrsdpfjxv A S Sjx Aacjw Simple Operation: The Scout Pro digital scales are incredibly easy to operate, featuring a high-contrast LCD display that ensures readability from any angle. Durable Design: Sealed front panel, molded spill ring, and a stainless steel platform protect the balance from spills and make it easy to keep clean. Multiple Weighing Units: Includes grams, kilograms, pounds, ounces, and a combined pound:ounce display. Switch between units with just the touch of a button. Multiple Application Modes: Enhanced Parts Counting: Allows for recalculating the average piece weight. Percentage Weighing: Ideal for comparing sample weights to a reference weight. Totalization: Allows repeated summation to the limit of the display, not just the capacity of the balance. Display Hold: Perfect for weighing large packages, only available in the Ohaus Scout Pro series. Weigh Below Hook: An integral hook allows for below-balance weighing, critical for density or specific gravity determination. USB/RS232 Connectivity: Features an easy-to-install USB or RS232 interface for quick data connection to a PC or printer, a feature unique to the Ohaus Scout Pro in this price range. Battery or AC Power: Powered by 4 AA batteries, offering up to 40 hours of operation with auto shut-off, or can be powered through the included AC power pack. Physical Lock Switch: The lock switch helps reduce operator error by locking the balance into a specific configuration. Security Bracket and Shipping Lock: Comes with an integral security bracket and a shipping lock to protect the weighing mechanism during transport. Specifications: Maximum Capacity: 4,000 g Readability: 0.1 g Pan Size: 5.6 in x 6.5 in (142 mm x 165 mm) Linearity: ±0.1 g Stabilization Time: 3 seconds Dimensions: 8.3 in x 2.1 in x 7.5 in (210 mm x 54 mm x 192 mm) Weight: 4 lb (1.8 kg) Power Supply: 4 AA batteries or AC adapter (included) Construction: ABS housing with stainless steel platform Units of Measurement: g, kg, oz, lb, lb:oz, t, dwt

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Lsdpfxjxv Af Eo Aacerw Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanicle Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). Lrodpfxjxv Afls Aacjw The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. Lodpfx Aaexv Abtocjrw USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Ledpjxv Abgefx Aacjrw Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Lrjdpfx Aoxv Aavjacsw Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance