Used Baler for sale (203)

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Redpju N A U Isfx Af Ajcf For inquiries about this press, please select your offer option! in progress. *

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Redpfx Aozil S Ujf Aecf Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Rcsdpfjzd Rkjx Af Ajf Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Redpfx Afjbhxbts Aocf Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Rcedpfsv Aktnex Af Ajf Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018

Condition: excellent (used), I sell a Lukas baler in very good condition. Redpfeum Htzjx Af Aecf

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Rcjdpfx Afjw E Htuo Aof Machine decommissioned

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Rjdpfx Asd Iya Njf Aocf Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. Rcodpjdfc Iyjfx Af Asf 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Rcsdpjtvau Ajfx Af Aef Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), Year of construction: 1996, 2 pieces Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled Rcjdpertngcjfx Af Ajf

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Rcodetvat Tspfx Af Aef

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Rcjdpfx Afsmqi Ake Aef

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. Rcedpfxsbhy Twe Af Ajf By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550HD special waste baler is the ideal baler for compacting difficult materials such as scrap tyres, computer monitors CRT, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3570 H x 2115 W x 1200 D mm Machine weight: 1935 kg Transport height: 2500 mm Loading aperture: 1500 W x 780 H mm Cycle times: 50 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Rcodpfxozd Rvo Af Aef Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Scrap tyres Food cans and sheet metal containers Canisters and plastic containers / packaging Car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Rcedpfx Afjvbrfcs Asf Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons Rcedpfx Afogwa T Re Asf 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. Rsdpfx Asdfcqaef Ajcf The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Rcodpfx Afsdzvhwj Asf Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net Redsff Sbispfx Af Ajcf - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. Redpfxsn Argis Af Aocf By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. Redpfx Afjdd Tp Rs Ascf SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Rodpeiklxbofx Af Aocf We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Year of construction: 2025, condition: used, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Redpfswk Dv Djx Af Ascf Technical details, equipment, photos, and operating time are shown in the attached description.

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Rcedpfx Afsb Rz R Ue Asf Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine