Used Baler for sale (209)

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Bwedpfx Anju N A U Ie Uor Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Bodszfy Amepfx An Uswr Noise level: < 70 dB(A)

Condition: used, Year of construction: 2013, _____Sale on behalf of customer:V Kuhn VBP 2160 Round BalerYear of manufacture: 201316,257 bales23 knives3D wrapperThe machine underwent a complete overhaul last winter:- new rotor,- new cutting floor,- new endless belts (original Kuhn),- pickup newly bearing-mounted,- tyres in good condition,- no maintenance backlog.The baler is in absolutely top condition and ready for immediate use without hesitation.We are selling the baler-wrapper combination due to a planned new purchase.Sale only after inspection.No warranty or guarantee.Storage location: not specified Bwodpfxsylrtfe An Ujr

Condition: good (used), Year of construction: 1996, 2 pieces Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bjdortngcjpfx An Uswr Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust Bwodpjff Sbijfx An Uer - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Bwsdszff Smopfx An Uor Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us. Bwodpfx Aoiklxbjn Uer

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 51045/1504/C, pressing force: 300 t, input voltage: 400 V, type of input current: DC, total width: 4,200 mm, total height: 2,450 mm, overall weight: 14,000 kg, total length: 7,070 mm, DGM TECHNOCUT 1050S Fully Automatic Die-Cutting and Stripping Machine Manufacturer: DGM (Huizhou Degang Machinery Co., Ltd.) Model: TECHNOCUT 1050S Year of Manufacture: 2021 Bwjdpezdcczefx An Ujr Condition: New, never used in production Technical Specifications: Max. sheet size: 1050 × 740 mm Min. sheet size: 400 × 360 mm Max. die-cutting size: 1040 × 730 mm Paper thickness: 80–2000 g/m² Corrugated board thickness: up to 4 mm Maximum speed: 7,500 sheets/hour Maximum pressure: 300 tons Die-cutting accuracy: ±0.075 mm Gripper margin: 9.5 mm Installed power: 20 kW Machine weight: 14,000 kg Machine dimensions: 7070 × 4200 × 2450 mm Equipment: Automatic non-stop feeder Registration system with front and side guides Double sheet detector Die-cutting section Automatic stripping section Pneumatic chase locking system Automatic lubrication system Cooling oil circulation system Touchscreen control Suitable for: Folding carton production Packaging manufacturing Corrugated board processing Commercial printing finishing Die-cutting and creasing operations The machine is located in Lithuania and is available for immediate inspection and delivery.

Condition: ready for operation (used), Year of construction: 2010, An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible. Bodpfx Anjzbuvhe Uowr

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. Bsdpeyzr Nmjfx An Uewr • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Bodpfxov Ak Npj An Ujwr Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Bodpfxsyy Ddaj An Uowr Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. Bwjdpfx Ajxvh Dyon Uer This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. Bedpfsyuyg Ssx An Ujwr * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: used, Year of construction: 2021, functionality: fully functional, For sale: HSM 7009st baler and conveyor belt. Bwsdpfx Aney T Inps Ujr

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h Bedpfxszc Rhvs An Uewr bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Accessories: ruffler and special press ram

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software. Bwsdpfx Aotvau Asn Uer

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Bedpfxotvat Ts An Uewr

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Bedoy Ndfpepfx An Uswr

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Bodpfx Aoy Ndfisn Uowr

Condition: ready for operation (used), Year of construction: 1995, A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible. Bwedpfx Anoy Ndf Ae Uor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Bodpfx Aon Argien Uswr Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-240 Bin Compactor is ideal for material compacting in your 240 Ltr. garbage and recycling bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 2 Ton Compaction: up to 80 % (material depending) Machine size: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (on request) Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins Bwsdpfxebqg Rfj An Ujr No more climbing into bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized AUTO compaction cycles with E-stop and locking key Bag press insert Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Bodpfjbhu Iqox An Ujwr Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting Dry and wet waste materials Recyclable materials Paper and cardboard Light valuable materials Optional extras Machine colour RAL Machine galvanized PLC auto compaction cycles Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Bwsdpo Ry Husfx An Uor Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine