Used Ball Screw Drive for sale (28,332)

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 316.2 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Dedpfoz Eqa Tjx Ak Aocp Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: used, Year of construction: 2017, Offered for sale is a rotary screw compressor with an integrated refrigerant dryer. Volume flow rate: 1.82m³/min, operating pressure: 9.75bar. Controller: Atlas Copco Elektronikon Graphic with display. Equipped with an integrated refrigerant dryer (FF version) and emergency stop switch. Inspection possible by arrangement. Dedpfxo Ad Nqbe Ak Aecp

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder Dcsdeznkx Dspfx Ak Aep PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Dcsdpfxeyr T H Tj Ak Aep

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Dcodpoyr T Idofx Ak Asp

Condition: used, Year of construction: 2011, Compressor design: Screw compressor Pressure: 9/10 bar Volumetric flow rate: 460 l/min Weight, approx.: 170 kg Dodpfe Agpdksx Ak Aecp Motor power: 4 kW Storage location: Rieth

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability Dodpfxoz Slnzs Ak Aocp • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: used, Year of construction: 2014, operating hours: 32,903 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 1,055.4 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Atlas Copco GA90VSD screw compressor Inverter integrated 90 kW Dodpfx Akjz Ngz Aj Aocp 13 bar 17.59 m3/min Year of manufacture: 2014 Operating hours: 32,903 h

Condition: used, Year of construction: 2019, operating hours: 43,002 h, functionality: fully functional, power: 26 kW (35.35 HP), volume flow: 294 m³/h, pressure (max.): 12.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Atlas Copco GA26VSD+FF screw compressor Inverter and dryer integrated 26 kW Dcedpfsz Nh Svjx Ak Aep 12.75 bar 4.90 m3/min Year of manufacture: 2019 Operating hours: 43,002 h

Condition: new, Year of construction: 2026, operating hours: 1 h, Exhibit model available for immediate delivery: New Kaeser SK 26 T - 12 bar rotary screw compressor with integrated refrigeration dryer with electronically level-controlled condensate drain with Sigma Control 3 controller Year of manufacture: 2026 Operating hours: 1 • Max. pressure: 12 bar • Rated power: 15 kW • Delivery rate: 2.07 m³/min • Noise level: 67 dB(A) • Compressed air outlet: 1" Dedpfx Aj Adtf Nsk Aecp • Pressure dew point: +3°C • Condensate drain: ECO Drain Dimensions (L x W x H): 750 x 1230 x 1245 mm Weight: 395 kg Convenient leasing options for new machines are available through our partner bank. Visit our showroom. We always stock a wide selection of new and used compressors!

Condition: used, Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, overall weight: 105 kg, power: 3 kW (4.08 HP), pressure (max.): 10 bar, ambient temperature (max.): 40 °C, Equipment: documentation/manual, type plate available, Atlas Copco GX4P EP screw compressor Operating pressure – 10 bar Djdpfs Afc Nmox Ak Ascp 2200 operating hours A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ALUP EVOLUTO45 screw compressor, machine with frequency inverter, recently serviced. Technical specifications: capacity: 9.06 m3/min; engine: 45 kW; maximum pressure: 13 bar; year: 2019; Dcsdpfj Afdd Sex Ak Asp operating hours: 4943 h; compressor in full working order, with warranty. Net price: 24,900 PLN Gross price: 30,627 PLN

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATLAS COPCO GA7FF screw compressor with air dryer, after service. Technical specifications: Capacity: 1.18 m3/min; Engine power: 7.5 kW; Maximum pressure: 7.5 bar; Operating hours: 11691 h Dcedpfx Aj Afftbjk Aop Year: 2001 Price: 7400 net Price: 9102 gross Compressor in fully working condition. We provide service support.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ATLAS COPCO GA22VSD screw compressor with frequency inverter, serviced. Technical specifications: Capacity: 3840 m3/min; Dodpfxj Afhi Eo Ak Ascp Engine power: 22 kW; Maximum pressure: 12.80 bar; Year: 2008 Operating hours: 11543 h Price: 17,800 net Price: 21,894 gross The compressor is in perfect working order, ready for use, and comes with a warranty. We also provide service support. Link to video below.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CREEMERS RCA5.5 screw compressor, machine, serviced. Technical specifications: Capacity: 600 L/min; Engine power: 5.5 kW; Pressure: 10 bar; Operating hours: 6230h!!! Dcjds Afhk Nopfx Ak Aep Year: 2017; Compressor in fully working order. Net price: 8700 PLN Gross price: 10701 PLN Video available below.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, GRASSAIR RLR 1500VT screw compressor (ATLAS COPCO screw module), machine after service, with frequency converter (variable speed). Technical data: capacity: 1.70 m3/min (1700 L/min); engine power: 11 kW; maximum pressure: 12.5 bar; year: 2012 operating hours: 1610h compressor in full working order; net price: PLN 8,800 gross price: PLN 10,824 Link to video below. Djdpfs Afhqvsx Ak Ajcp

Condition: used, Year of construction: 2018, operating hours: 20,500 h, machine/vehicle number: LGFB 201807-6666, overall weight: 260 kg, total length: 1,050 mm, total width: 700 mm, total height: 1,120 mm, fuel type: electric, Equipment: type plate available, Serviced regularly, with documented proof every 2,000 operating hours. Additionally available for separate purchase: a separate refrigerated dryer and a compressed air tank. Dcjdo Ad It Uepfx Ak Aop

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc Dcedez Hm Rkjpfx Ak Asp - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted. Dedpfxjz St Iue Ak Aocp

Condition: good (used), Year of construction: 2021, operating hours: 22,633 h, machine/vehicle number: 1220-8235345, Offer 26136 Screw compressor with integrated refrigeration dryer + air receiver Technical data: - Control system: SIGMA CONTROL - Operating hours: approx. 22,633 h - Load hours: approx. 10,983 h - Operating pressure: 11 bar - Delivery rate: 3.5 m³/min - Motor speed: 2960 1/min - Drive: 400 V / 18.5 kW Dcodpo Aba Npsfx Ak Asp - Integrated refrigeration dryer - Space requirement: approx. W 800 x D 1650 x H 1550 mm - Weight: approx. 650 kg - Öewamat - Compressed air receiver, manufacturer OKS, 500 L, year of manufacture 2021 - Compressed air filter

Condition: excellent (used), Year of construction: 2018, PROD. ATLASCOPCO TYPE GA45 FF S/N API585058 YEAR 2018 POWER (kW) 45 CAPACITY (m3/min) 8.29 PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no Djdpfx Ako Aazttj Aocp BUILT-IN DRYER yes, R410a 0.97kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 11/2 DOCUMENTS no

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Capacity: Screw conveyor, ø 75-36D; approx. 600 kg/h Drive: A.C. motor, 182.0 kW Dcjdpfj Abc Hkjx Ak Ajp

Condition: used, Mitsubishi NF400-CS Circuit Breaker – 400 A For sale is a used Mitsubishi Electric NF400-CS circuit breaker. Manufacturer: Mitsubishi Electric Type: NF400-CS Rated current: 400 A 3-pole Voltage: 600 V AC Condition: Used Removed from a fully operational machine Fully functional up to removal Sold as pictured Dcsdpfxjz Euywo Ak Aep Signs of normal wear from use

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5 Dedpfxo Afnqcj Ak Aecp

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ATLAS COPCO XAHS408 STAGE5 mobile compressor with an aftercooler, fully serviced. The machine comes with documentation for registration. Technical data: capacity: 24.0 m3/min; working pressure: 12 Bar; year of manufacture: 2020; engine: CUMMINS 187KW; operating hours: 971h; Dsdpfx Ae Ad E Hxsk Aocp The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 245,000 PLN Gross price: 301,350 PLN The machine is in excellent condition. Links to videos are provided below.