Used Banding Machine for sale (65,510)

Year of construction: 1986, condition: good (used), machine/vehicle number: 26647, Technical data: - Roll diameter 420 mm - Overhang 410 mm - Max. passage height 265 mm Nwodpect Nm Usfx Akwjk - Table size 600 x 600 mm - Table, left and right, swivels by 15 / 30° each - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Saw band width 3 - 16 mm - 8 cutting speeds 12 - 375 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - Includes: - Saw blade welding device in the machine stand - Grinding wheel and lamp - Shear, air pump and lighting

Year of construction: 1985, condition: good (used), Offer 21135 Njdpfsg Aid Ssx Akwowk Technical data: - Roller diameter: 420 mm - Overhang: 410 mm - Max. passage height: 265 mm - Table size: 600 x 600 mm - Table, left and right, can be tilted by 15 / 30° - Table height from the floor: 1020 mm - Saw blade length: 3150 - 3260 mm - Saw band width: 3 - 16 mm - 8 cutting speeds, approx.: 18 - 562 m/min - Drive: 400 V / 1.1 / 1.7 kW - Weight, approx.: 650 kg - Space requirement, approx.: W 900 x H 1900 x D 1000 mm - Electric foot switch

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm Nedpfx Akjrl Irvowewk - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min Njdpfx Ajzc Izaskwjwk - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 21022, Item 25091 Technical specifications: - Roller diameter 420 mm - Throat depth 400 mm - Max. clearance height 280 mm - Table size 600 x 600 mm - Table tilts in 2 planes ± 45° and ± 15° - Table height from floor approx. 975 mm - Saw blade length 3200 - 3400 mm - Continuously variable saw blade speed 10 - 260 m/min - Drive 400 V / 0.9 / 1.7 kW Nodov U Swxopfx Akwowk - Weight approx. 500 kg - Space required approx. W 750 x H 1950 x D 1150 mm

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: Nsdoy H Dmhopfx Akwewk - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm Nwedstwbxnepfx Akwek - with: - IDEAL saw blade welding unit - lighting

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: - Roller diameter 520 mm Nodpfxouk D I Rs Akwswk - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Technical data: Nedjri R Azopfx Akwowk - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Nedpfxjwmnz Ns Akwswk Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm - Table size 630 x 530 mm - Table tilts 10/30° - Table height from floor 950 mm - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg Nsdpfxsxph E Ro Akwowk - Roller conveyor weight approx.: 3500 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: Nedpfxexta N Ao Akwjwk - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Njdpfx Akjzk N Euswjwk Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 Features and technical specifications: At 5,500 mm in length, the Quadromat is the shortest edge-processing machine capable of complete processing of edge banding materials with an integrated workpiece return mechanism . Not only are the longitudinal edges milled within the machine, but the end edges are also profiled, thereby completing the machining process. The finished workpiece is returned to the operator, no manual reworking is required. Nedpfx Aszk Nr Uskwewk With PLC control, with up to 20 machining programmes Workpiece dimensions: – Minimum width: 60–80 mm (depending on the edge material) – Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Glue bar thickness: 0.4–12 mm – minimum edge banding length: 400 mm Feed rate 18 m/min with 2 jointing motors with multifunctional milling unit (flush, chamfer, radius) with scraper blade with cross-cut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm Nwodpfx Aszk Nmrekwjk - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm Nwsdpoztazfjfx Akwsk HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 Nwodpfxezk N U As Akwjk - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Nwsdpfozk N Hrjx Akwjk Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Thermostatic temperature control via a dial thermostat Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Njdpfxszk N Eho Akwowk Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit Nodezk N Amspfx Akwowk - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Control system with LCD display swivelling control panel Programme memory Manual pressure bridge adjustment Feed via conveyor chain Extendable workpiece support Joint milling unit 1961 : - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - automatic feeding of roll and strip stock Glue application system 1906: - Cartridge system with sensing nozzle – with automatic reloading - PUR adhesives can be used Printing unit 1816: - with powered roller - pneumatic control of the printing unit Trimming unit 1918: - 2 x 0.22 kW - swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - for flush, radius and chamfer milling - motorised adjustment - Blow nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, post-forming up to r = 6 mm Radius scraper unit 1929 MOT 2: Nwodpjzk Nwwsfx Akwok - Plastic edging up to 3 mm - Chip collection box for radius scraper Surface planer 1964: - application-controlled surface scraper - Air nozzle on the surface scraper Buffing unit 1940 Edge thickness (roll stock): 3 mm Edge thickness of strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Workpiece support clearance: 470 mm Support plate diameter for edging material: 800 mm Trimming blade for roll stock up to: 3 mm Heating-up time: 3.5 min Power of jointing cutters: 2 x 2 kW Cross-cut saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Power for corner copying: 0.22 kW Extraction nozzle for joint milling unit: 120 mm Extraction nozzle for milling unit: 70 mm Extraction nozzle for scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - MAGELIS control system - for EVA-based hot-melt adhesives - Jointing: 2 × 1.5 kW, u = 12,000, 200 Hz - Cross-cut saws: 2 x 0.2 kW, automatic tilt 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper blade - Surface scraper blade Nwjdpfszk Nt Eox Akwsk - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: at short notice Storage location: Baden-Württemberg

Condition: used, Year of construction: 1983, Second-hand machine Nedpfx Akszk Ntlowswk Year of manufacture: 1983 For pre-coated edge banding material Edge banding up to 1.3 mm with roller trimming with flush trimming using a blade with flush milling/chamfer milling top/bottom with HF motors Location: Röllbach Availability: at short notice

Condition: used, Manufacturer: KASTO Nwsdoxcnppopfx Akwok Model: SSB 260 VA Max. cutting size: 260 x 260 mm / Diameter: 260 mm Weight: 1915 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Nodsn Aw Ucopfx Akwjwk Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test