Used Bar Peeling for sale (14,436)

Condition: excellent (used), Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm Tjdpfeb A Nhasx Afgsd -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: Tedjdnaz Nopfx Afged -Weight: 25 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min Tedpfx Aedpyzrsfgod -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 290 mm -Recess inlet: Ø 268 mm -Bolt circle: Ø 168 mm -Mounting hole: Ø 21/31 mm -Mounting hole spacing: 148 mm -Through hole: Ø 70 mm -Weight: 43.5 kg Tedpfeb E N Txex Afged

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Tedpfeb Uhuhjx Afgjd -Max. Pressure: 80 bar -Liter output: 18 l/min -Hydraulic tank: liters -Dimensions: 700/355/H830 mm -Weight: 200 kg

Condition: used, Pressure reducers, pressure regulators, manometers Todpfxob Uhuxj Afgjd -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece

Condition: good (used), Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 Todpfxob A Ibdo Afgsd -Pressure gauge display up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg Todpfjb A I H Ijx Afgjd

Condition: used, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg Tjdpfeul H Ebex Afgsd

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Tjdpjunm S Hofx Afgjd

Year of construction: 2022, condition: good (used), Used compressed air tank 500 litres horizontal, painted 11 bar (without fittings set) incl. container papers (2 pieces available in total) Year of construction: 2022 High-quality compressed air tank in lacquered design. Specifications: -Volume: 500 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 600 mm -height: 710 mm -Weight: 165 kg -Connection compressed air inlet: 1 x G 2" -Connection compressed air outlet: 1 x G 2" Tjdpfsm Drx Isx Afgjd -Connection safety valve: G 1/2" -Connection condensate drain: G 1/2" -Maintenance opening: see compressed air inlet and outlet Production and testing according to EC directives AD 2000 Design temperature: -10 °C to + 120°C Surface coating: lacquered Vistit our store.We always have a wide range of new and used compressors and dryers.

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 Tjdpfx Aeuugi Sofgjd CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg Tedpfjgp Tm Ssx Afgod

Condition: used, Year of construction: 1999, diameter 15 mm length 800 mm = bar loading and de-loading magazine Tedpjvh I Uajfx Afgjd for bars up to 15 mmø, bar length 800 mm

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Reishauer, wedge bar chuck Chuck size: Ø 165 mm -Recess mounting: Ø 268 mm -Bolt circle: Ø 140 mm -Through hole: Ø 40 mm -Dimension: Ø 165 x 120 mm -Weight: 11.7 kg Tsdpown Eaxjfx Afgjd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Todpfx Ajwra Ewefgjd Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: ready for operation (used), Year of construction: 2008, bar length: 2,100 mm, bar diameter (max.): 85 mm, overall weight: 1,000 kg, Bar diameter Ø 8-80 mm 7-65 mm Magazine capacity 270 - 320 mm (360 kg max) Minimum bar change time 27 sec Feed rate 150 mm/sec, adjustable Return speed 950 mm/sec Supply voltage 230/400 Volt Installed power 3 KW Tjdpfx Ajw Iwi Rjfgsd Compressed air 6 bar Weight 1000 kg

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Tjdpfx Afjw Rfkbogjd Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar Tsdowwqtpjpfx Afgsd -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump Todpfxewwqv De Afgjd -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H195 mm -Weight: 8.9 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 Tedjwwqxxepfx Afged -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Integral Hydraulik, hydraulic power unit with pressure switch -Pressure: up to 30 bar -Flow rate: 6 l/min -Pressure switch: Telemecanique XMG-B140 -Hydraulic reservoir: with pressure accumulator and level indicator -Individual components: see photos -Dimensions: 465/260/H510 mm -Weight: 48 kg Tsdpfx Afswmax Hegsd

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm Todpfxjw Uczxj Afgsd End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Todjxab Adspfx Afgsd Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: new, Year of construction: 2023, functionality: fully functional, Hydrafeed Top Fusion 3.2 metre automatic bar feed. Tedpfjvzzzmsx Afgsd Built in 2023, but never used or fitted to a machine, so still mostly in original packaging. Capable of holding up to 3.2m bar lengths with automatic adjustment to take bars from 8mm to 51mm diameter. We just don't have the space in our new building to fit it to our DMG turnmill machines, so had to buy the 1.5 metre versions instead. Cost £28,750 + VAT new, so >40% saving on list price for what is still a brand new machine.