Pressure reducer 200 bar

Rhöna Stickstoff

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 326 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control Bwedox D D Hyjpfx Ab Uok • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension Bwodpfx Abjc Rmy Ne Ujk to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Bodpswbuzfofx Ab Uewk

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) Bwsdpfx Abjxw Ih Us Ujk - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, pressing force: 87 t, total width: 1,800 mm, total height: 2,840 mm, overall weight: 8,300 kg, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 6, This 6s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm Bodeyhp Edspfx Ab Uewk • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend • Max. Y-axis speed (operating step, optional): 25 mm/s Technical Specification Bending Length 2210 mm

Condition: used, functionality: fully functional, Year of construction: 2018, TRUMATIC 6000 FIBER (K06) LARGE FORMAT + SHEETMASTER + GRIPMASTER Year of manufacture: 2018 Laserpower: 3kW fiber Additional functions, MACHINE: Punching quality package Forming package MultiTool function Engraving function SoftPunch function Die spray lubrication with level monitoring Descending die Integrated flattening function Bsdpfsyambaox Ab Uswk Smart punch monitoring Additional clamp 1 pc Individually opening clamp 4 pc Repositioning cylinder Vibration damping Brush tables with loading and unloading aid Warped sheet detection Wireless Operation Point MDA interface Additional functions, SHEETMASTER: SheetMaster 3000 x 1500 mm (AK04) Loading station with fanning magnet Unloading platform Loading and unloading parallel to production Peeling system including positioning aid for large-sized sheets Additional positioning aids for medium-sized sheets Additional positioning aid for small-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Additional functions, GRIPMASTER: GripMaster 3000 x 1500 mm Parts conveyor belt for punch & laser side

Condition: used, Year of construction: 2018, operating hours: 20,000 h, machine/vehicle number: A0261G0108, laser hours: 20,000 h, laser power: 4,000 W, warranty duration: 1 months, Equipment: centralized greasing system, documentation/manual, emergency stop, BTH IMPORT STAL Sp. Z o.o is offering for sale: TRUMPF TruLaser3060 L66 + TruDisk4001 Bwsdpjwf Epuofx Ab Usk Fiber source: TruDisk4001 (4000W) Working area: 2500x6000 mm Operating hours: 20,000 Laser-on hours: 42,000 The machine is in continuous operation. Visits and tests are welcome.

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Bsdpfx Aboyrf Dkj Uewk Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Bodpstmqi Dsfx Ab Ujwk Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2003, condition: used, Complete and functional evaporation plant. Sold by order of the customer! With questions simply announce. Bsdpocw Idtjfx Ab Uowk