4
Preamplifier, laser
9dm7fp3qu
-Name: Preamplifier W979
-P0979-200-00002
-Number: 2x available
-Price: per piece
-Dimensions: 20/20/H60 mm
-Weight: 40 g
1
10 ring brackets
Capacity 5 to.
T0bejubdb
There are several available
3
I am selling cables for a plasma source for a burning machine for the Hypertherm HPR 130 or HPR 260 source. Length 15 m. Installed on the machine only for testing! Part code is 128785, 128786.
Price of new cables: € 3.203
Gxkjys
5
10 tons container turning device, roller block
380 V, speed infinitely variable 200 to 1200 mm /min.
Svgsxo
for diameters from 300mm to 3500mm
roller diameter 270mm x 120 mm
Double drive
with hand and foot remote control, complete set
2
Recooling unit make DALEX type DRS 9
Make # 8921647972 Year of construction 1992
Technical data:
Cooling capacity 14000 W
compressor power 3,0 kW
supply voltage 380 V
max. current consumption 7,5 A
Air capacity 3800 m³/hour
Pump capacity at 2.0 bar 50 l/min.
Pump pressure 2.8 bar
Brlpfenxsw
Water tank capacity 200 l
Connected load 3.9 kW
Dimensions approx. 820 x 850 x 1720 mm
weight approx. 280 kg
used
4
TIG welding rod, welding wire
Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels,
Suitability tested down to -40 °C.
Gcvq3yv
-net weight: 5 kg
-Number: 7x package available
-Price: per package
-Weight complete: 5.3 kg/package
9
Protection level 4 - 12 M
Power supply 2 x CR2032
weight 460 Gramm
Buv0asoviz
dimensions 250 x 270 x 230 mm
2
+++ Special offer for immediate purchase +++
Hast3lb
+++ 27 percent price reduction +++
+++ Top offer +++
Old price: 1500 Euro
New price: 1100 Euro
400 Euro instant discount
Only 1x available
***
Cable length: 20 m
7
Welding turntable KT 300
Load horizontal 300 KG, tilted 150 KG
Power consumption 220V, 50 Hz
Table diameter 500mm
Diameter hollow shaft 140mm
table height 600mm, tilted to middle 450mm
length 650mm, width 650mm
Tilt range infinitely variable via crank gear motor 0 - 90
speed 0,3 - 2,5 rpm
Incl. foot remote control
Surcharge:
Byq9yhsnhc
Quick release - jaw chuck
Diameter 400mm, 550.-€
2
Recooling unit make DALEX type DRS 10
Make # 79014712 Year of construction 1990
Technical data:
Cooling capacity 18000 W
compressor power 3,7 kW
supply voltage 380 V
max. current consumption 9.3 A
Air capacity 8100 m³/hour
Pump capacity at 2.0 bar 50 l/min.
Pump pressure 2,9 bar
Water tank capacity 200 l
Ez0sec8pm
Connected load 4.6 kW
Dimensions approx. 1200 x 950 x 1820 mm
weight approx. 310 kg
used € 1.500,--
1
for bottle size, gas and oxygen: 20 l
Space: 600 x 1000 x 1150 mm
I8jyjl7ly
3
Wire electrode, SG2 welding wire, welding wire
Dphh0mf
-net weight: 15 kg
-Number: 1x package available
-Price: per package
-Weight complete: 15.6 kg/package
8
Protection level 9 - 13 M
Power supply 2 x CR2032 3V
weight 460 Gramm
dimensions 250 x 270 x 230 mm
Dx83e3
15
9 St. Various high-quality used water recooler heat exchanger units make BKW-KÜMA Germany
little in use almost as good as new CONDITION,
Use, for example: welding machines, laser plasma, hydraulic systems, plastic injection molding machines, machine coolant liquid cooling, etc.
Types:
WRK 10 -CH year 2001 (2 pieces)
WRK 10-R407 C year of construction 2015 (1 piece)
RWT 30-1KKP built in 2012 (2 pieces)
RWT 30-1KKP year of construction 2008 (1 piece make Küma)
RWT 10-1KK built in 2001 (1...
2
Zum Verkauf steht folgender Artikel:
- Mehrfach Gas Verteiler
- Fa. Ibeda
- Typ GEV-5
- versch. Ausfuehrungen
1reihig fuer Sauerstoff
2reihig fuer Acetylen und Sauerstoff
reihig fuer Acetylen, Mischgas und Sauerstoff
Fk2uuxf
6
2 welding fume extraction tubes make PLYMEX
technical data:
throat 6000 mm
Buy7u0rp9d
with
- 2 articulated arms
- 2 wall brackets
- weight compensator FEIN load capacity 22 - 32 kg
- trumpet shaped suction tubes
very little used, in very good condition
5
Welding gun ARO J7 1-5 4-400 TM
Welding gun ARO J7 1-5 4-400 TM
further details and scope of delivery see photo.
Bxngvv0ae0
Technical data see type plate.
Item condition: used, untested
condition: used, untested
Without OVP
Without original packaging
Example photos
sample pictures
A viewing in Niederlangen/Emsland is possible!
For further questions you can contact us by email.
The sale is exclusively to interested parties for commercial purposes and under exclusion of any warranty for material d...
5
MIG/MAG hose package
Buaqakv9al
-MIG/MAG hose package: water-cooled
-Length: 3,45 m
-Weight 3 kg
8
Protection level 9 - 13 M
Hgt2sa3mw
Power supply 3 Volt
weight 2 kg
dimensions 300 x 240 x 240 mm
6
Cutting discs
Horse and Tyrolite
Horse
350x2,5x32mm
41A46H
BF80
4400RPM
Sg-Elastic
52 Piece
Tyrolit
350x2,5x32
Steel / Stainless
A80-BM
Type No 167334
10 pieces
Bxrbxfi0rw
2
for laser cutting machines
Butn7ef7zn
3
Spare Parts Trumpf Laser
Type: Trumatic L4003E
Complete Z-axis:
Make: Indramat
Type: MACO25B-0-ZS-4-E/040-A-1
Part No.: 245725
Year: 34/1998
Serial No.: MACO25-08145
Complete X-axis:
Make: Indramat
Type: MACO93C-0-FS-4-F
Part No.: 254396
Year: 44/1994
Serial No.: MACO93-39469
Complete Y-axis:
Make: Indramat
Type: MACO630-0-11S-4-F/095-B
Part No.: 260877
Year: 47/1994
Serial No.: MACO63-27746
Various spare parts: - Gearing wheels
- Cables
Lxz3f
- Toothed rack bars
- Lineaire geleidin...
4
Welding gun MFG K-040-T-02-F
further details and scope of delivery see photo.
Technical data see type plate.
Item condition: used, untested
condition: used, untested
Without OVP
Without original packaging
Example photos
08ot7e77
sample pictures
A viewing in Niederlangen/Emsland is possible!
For further questions you can contact us by email.
The sale is exclusively to interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title!
By your ...
5
MIG/MAG hose package
-MIG/MAG hose package: water-cooled
-Length: 3,2 m
-Weight: 3,0 kg
Bufcy3hsy0
4
100l dryer for submerged arc flux. 0-400 degree with electronic control
Xoes8
2
Manufacturer Speedglas
Model Speedglas 3M
Type 9000
without headband/filter
Bmx7korus2
as shown in the photograph!
2
Length: 15 m
Fopukzcp
6
Servo-motorised 3G-X-forceps / modular welding gun for robots
was mounted on KUKA robots - the adaptation to such is included
Electrode force max. 6kN at 500mm radius
X-tongs for Cu-arms with diameter 54mm
MF transformer 560V / 1kHz, 56kVA
Ratio 1:70 - U20, 7.2V
Sta7n8
with measuring coil 150 mV / kA and thermal switch
Servomotor 8-pole 300V - 20kN maximum power
Working stroke 95mm + 10mm reserve
PDIV display Resolver 8-pin
Spindle pitch 5mm
Electrode arm for 3G pliers, projection approx. 400mm
...
1
TRUMPF laser pump module model 11-16-24-A1/03, new laser diode stack, in exchange of old pump module of same type, for disk laser sources TruDisk 1000 - 8000 (2C), TruMicro 7050 or 7240, other models on request.
33geh27kk
5
Stick electrodes 3.2 x 350
-Type: OK 63.31
-Price: per package
-Number: 4 packages available
Beqnz8tqdm
-Weight per package: 1.8 kg
1
Control stage MPS 8043 IQ1
Eiazgpfn
With current monitoring and control
With step belt
6
Power: 1,5kW
Hvk9s8x
5
cooling unit for spot-welding machines and roll stands
5.500 Watt
Be2sm9afd7
2
Flue gas extraction burner
unused
Bpinjaetck
1
Dalex welding control
Daag00e3u
functionally tested
5
MIG/MAG hose package, MIG/MAG welding torch
Kflts73x
-MIG/MAG hose package: air-cooled
-Length: 4,0 m
-Weight: 2,6 kg
9
No wear can be seen on the control buttons.
Item condition: Used from stock
Yqwuw
Signs of wear: None to slight signs of wear
Case: Very good, light scratches
Manufacturer: Emhart Teknologies
Warranty in months: 12
Weight: 1.182 kg
Storage location: Rosenfeld
Storage location: P11B3-L
2
Hydraulic pump / high pressure pump
Qucxbwleg
SKF 729124
Max pressure: 100 MPa
Volume: 0.5 cm3
Oil tank capacity: 250 cm3
The pressure hose length: 1500 mm
Weight: 3.5 kg
4
V 220 A 12 A max. 18
V 380 A 11 A max. 21,5
Stesxc
50 Hz
3
controler for resistance weldingmachines Dalex and others
T 8036
T 8036 S3
Nopfwve
MPS 8043/1
MPS 8043 IQ
available from stock
1
Dalex welding control
functionally tested
Iwhsktit
5
MIG/MAG hose package, MIG/MAG welding torch
-MIG/MAG hose package: air-cooled
-Length: 4,25 m
Bufcwgnaer
-Weight: 4,5 kg
1
Designation: AW 5000
D0mrubh7y
Design: K4 W/F++/3,5 m
Load: 500 A for CO2; 400 A for mixed gas M21
Duty cycle: 100
Wire: 0.8-1.6 mm
4
Rotation axis height: 850mm
Boeai9jebh
pneumatic brake system
7
1 Nadex Welding control unit for sale.
3 ~ 400VAC, 300A, Nadesco Nadex IWC5-11030-N1,
It has not been used yet. It was a backup module.
Stock 1 pc.
Net price: 1000.- euros
Ro799vqp
Weight: 65 kg.
Parcel delivery is possible at pre-agreed prices.
Please email me with your questions.
2
controler for resistance weldingmachines
MPS 1033
MPS 1036
MPS 15033
MPS 15036
Bfgqkaaswa
MPS 15043
1
Dalex welding control
Nvkap
functionally tested
3
TIG welding rod, welding wire
Bl9dgnxno
Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades.
-net weight: 5 kg
-Number: 2x p...
2
controler for resistance weldingmachines Dalex
MPS 100mono
MPS 100monoR1
MPS 100multi
MPS 100multiR1
---
Noakb
MPS 200mono
MPS 200monoR1
MPS 200multi
MPS 200multiR1
---
MPS 300multiR1
available from stock
Used Accessories and spare parts
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker still biggest sponsors of 2nd German football league
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
Sell now on Machineseeker! Over 220,000 inquiries per month
