Used Biesse Rover 24 L for sale (325)

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 Kedovwgizspfx Aiisdr CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm Kodsgtx Aqopfx Aiijdr 2900 Kg Technical information under subject of correction

Condition: used, Year of construction: 1997, - Edge banding unit Kjdjd Inktspfx Aiijdr - Cutting unit - Milling unit - Fine milling unit - Scraper blade - Buffing unit

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Kdsdped Iv H Rsfx Aiior Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Ksdpfx Aot N Rkvsiiedr Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 1999, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: Kdsdpfx Aiot N Hmmoijr COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Kdjdpfxjt N Rixs Aiijr Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Kdsdpfxofwvppj Aiier Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Kjdpexncrvofx Aiisdr Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request. Kdodst N N Aqspfx Aiior

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 21090, functionality: fully functional, feed rate X-axis: 25 m/min, overall weight: 3,800 kg, controller manufacturer: SINTRA, Dismantling and loading can be carried out by the seller! TECHNICAL DETAILS Feed speed: 25 m/min 2nd pass: 18 m/min MACHINE DETAILS Control: SINTRA Weight: 3,800 kg Air supply: 7 bar Extraction volume: 30 m/sec EQUIPMENT - CNC-adjustable working height - Infeed fence controlled by CNC - Side fence with idler rollers for panel support - Upper pressure unit with motorized belt - Anti-adhesive unit - Pre-milling unit - Panel edge pre-heating unit with lamps - EVA adhesive application system - EVA glue premelter - Pressure rollers 1 + 5 - End trimming unit with 2 motors and automatic angle adjustment Kedoydc Scepfx Aiijdr - Rough milling - Fine milling unit with 2 tilting motors and automatic adjustment via CNC servo motors - Multifunction unit (fine milling + corner rounding) with 2 motors and automatic CNC adjustment - R1 R2 edge scraping unit (NC pneumatic positioning) - Groove unit - Glue scraping unit with anti-adhesive spray system - Polishing unit with 2 motors for panel cleaning

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72122, functionality: fully functional, working width: 900 mm, number of spindles: 17, spindle speed (max.): 24,000 rpm, working height: 70 mm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 900 mm Working area, Z-axis: 70 mm Milling unit Number of milling spindles: 1 Tool holder interface: ISO 30 Spindle speed range: 12,000 – 24,000 rpm Spindle speed control: stepless Kdedpfjzulv Dex Aiijr Drilling unit Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 Sawing unit Manual operation MACHINE DETAILS Power of main motor: 4 kW Connected power: 12 kW Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Dimensions & Weight Transport dimensions (L × W × H): 2,000 × 2,600 × 2,700 mm Transport weight: 1,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, Year of construction: 2023, Edge banding machine Manufacturer: Biesse Type: Akron 1440 A Year of manufacture: 2023 Technical data - Panel height*: 10-60 mm - Edge height: 14-64 mm - Edge thickness from roll: 0.4-3 mm - Edge thickness in strip form: 0.4-12 mm - Panel overhang over the chain: 25 mm - Panel length: 140-3200 mm - Minimum panel width (at a length of 140 mm): 85 mm - Minimum panel width (at a length of 250 mm): 50 mm - Chain feed speed: 12 m/min - Distance between panels: 450-650 mm - NC axis package for automatic machine setup - Mounting kit for workpiece return * Minimum panel height: 8 mm at a maximum edge thickness of 1.5 mm. Depending on the selected processing units. Maximum permissible feed speed: 12 m/min. Units Anti-stick spray unit ADZ02 Pre-milling unit RT02 Kdjdpfx Ajzuyk Asiijr - two high-frequency motors, each 1.8 kW, 12000 RPM Gluing unit VC-511 - Processing of EVA and PUR granular adhesive - Filling volume: 1.5 kg Pressure zone - 1 driven pressure roller 100 mm, with independently adjustable pressing pressure - 2 and 3 pressure rollers, not driven, 60 mm, with anti-stick coating, arranged conically in relation to each other and pneumatically adjustable Trimming unit IT-70-S - two high-frequency motors, each 0.8 kW, 12000 RPM - The trimming can be performed straight (0°) or at an angle in a range of 0 to 15°. - Anti-static/coolant spray device after the trimming unit Flush trimming unit RF02 - two high-frequency motors, each 0.65 kW, 12000 RPM Corner rounding unit - two high-frequency motors, each 0.65 kW, 12000 RPM - Corner rounding is possible for both workpieces with a straight edge profile and for postforming and softforming profiles at 90° and 180° corners. Edge scraping blade RB02 - Switching between two processing profiles is done manually. Glue line scraping blade RC02 Polishing unit SZ02 - two motors, each 0.37 kW, 2800 RPM Hot air blower PH-501 - Power: 2 kW - Infinitely adjustable temperature control Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Edge banding machine Manufacturer: Biesse Type: Jade 340 Year of manufacture: 2018 Technical data - Workpiece thickness: 10 - 60 mm - Edge height: 14 - 64 mm - Edge thickness: 0.4 - 8 mm - Feed rate: 12 m/min Biesse HD touchscreen control unit Units - Pre-milling unit - Glue application unit - Additional interchangeable glue pot - Trimming unit - Corner rounding unit - Flush trimming blade and profile trimming blade - Polishing unit - Release agent spray unit Kdodpfx Aezux Tvsiijr Operating hours as of May 14, 2026: 4832 hours.

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm Kdodpfxezutrtj Aiior - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade Ksdpszutrajfx Aiiodr POST_Element Splitter NC-Hops 7.0

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Kdodpfx Aiowuckueisr Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Kjdpfx Ajwukyqjiiodr Total number of drilling spindles: 16

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. Kedpfx Ajzuhd Rjiiodr • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm Ksdpfxjzug Sms Aiiedr • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine only.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Machining type: Drilling and milling Kdsdpfezug Diex Aiier • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Kdodpfx Aijwuz Rtsier Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, machine/vehicle number: 008566, X axis working area: 3000 mm Y axis working area: 1300 mm Kodpfx Ajzvwproiiedr Total number of drilling spindles: 82

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Ksdpfx Aisx A Tk Ejisdr Max. panel length: 4300 mm Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, Year of construction: 2011, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW 1+3 tables Kjdpezqcrzsfx Aiijdr Speed 1-120 m/min. Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Basic electronic label printer Label printer support stand OS-Labelling - Graphic labeling on the machine with part drawings. QUICK OPTI software for optimization of cutting patterns. On-board version. OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 3 Rounded air cushion unloading table, size 2050 x 620 mm Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland