Used Bmc for sale (43)

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 625 mm, total length: 1,023 mm, total width: 849 mm, Tested forklift battery for your forklift - 80V 5PZS 625Ah - DIN A + 1 year warranty + Includes Aquamatik watering system + Includes terminal discharge leads & REMA 320 connector (other connectors can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol provided upon delivery) Rsdowzvycspfx Agzjck + Year of manufacture: 2024 Dimensions: Length: 1,023 mm Width: 849 mm Height: 625 mm Weight: approx. 1,470 kg Suitable for the following models and more: Linde E25-336-00/Flat Linde E25/-L/-RL-387-00 Linde E25 S-1276-00 Linde E25 S-336-00 Linde E30-336-00/Flat Linde E30-387-00 Linde E30 L - 1252-01 Linde E30 L - 387-00 /side battery change Linde E30 RL - 387-00Sti Linde E30 S - 1276-00 Linde E30 S - 336-00 Linde E35 - 387-00 Linde E35 L - 1252-01 Linde E35 RL - 387-00 Daewoo B25X Still R60-25 Still RX60-30 Still RX60-35 Still RX60-40 Toyota 7FBMF20/25 Toyota 8FBMT25 Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30KРAC Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Other common battery sizes available on request. Shipping available.

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length Rcodpfx Agsxtbf Eszok 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, color: yellow, operation weight: 14,500 kg, Year of construction: 2014, operating hours: 10,800 h, machine/vehicle number: DCH145R6NEE6E1274, Equipment: cabin, gripper hydraulics, Short-tail excavator with log grapple Bucket attachments included, bucket not included Please contact me via email. I'll get back to you as soon as possible. If you leave a phone number, I'll call you back. Rcodpfx Agewdgx Uezjk

Condition: not inspected (used), Year of construction: 1999, feed length X-axis: 760 mm, feed length Y-axis: 430 mm, feed length Z-axis: 500 mm, Ultimax 3 with 4th axis BT 40 spindle 8000 rpm spindle speed 760x430x500mm stroke 24-tool changer 860x508mm table Rcjdpfxovgbrve Agzjk

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Rcjdpexmhqzjfx Agzok Model: ABMC-1 Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Condition: new, Year of construction: 2025, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L Rcedpfx Agovptd Nozok 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 564 mm, Tested traction battery for your forklift - 80V 3PZS 465 DIN A + 1-year warranty + Includes Aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1.5 mm Width: 564 mm Height: 784 mm Weight: approx. 1280 kg Suitable for the following models and others: Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 Linde K 15 Linde P 120 - 5007-10 - side battery change Linde P 120 - 5007-10 - vertical battery change Linde P 180 - 5007-10 - side battery change Linde P 180 - 5007-10 - vertical battery change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 Still R 60-20 Still RX 60-16 Still RX 60-20 Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Rcsdpfx Aowzvz Tegzek Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Mitsubishi FBP16 Yale MTC 13 Common battery sizes available, please inquire. Transport can be arranged.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) Rcsdpfxjvd Ddce Agzsk length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), SMB Combisifter 10/32 + 32/60 2 fractions separates wood, plastic, foil and paper, wind sifting with filter system, 2 vibrating chutes, airlock, control cabinet with complete control system, mobile with hook trolley, self-erecting, compressor for filter cleaning, 1000 operating hours. Rodpfx Aop Aunlegzock

Year of construction: 2003, condition: good (used), Lane Divider Diverter Conveyor for PET bottles, 4 tracks/lanes Rcsdokwcaispfx Agzok

Condition: like new (used), Year of construction: 2019, operating hours: 3,944 h, functionality: fully functional, Controller NCT304 (Touch screen, USB, 19 inch screen) Table size 2000 x 1400 mm Nod of T slots x sizes x distances 9 x 22 x 160 mm Table load max 6000 kgs Distance between spindle and table surfaces 200 - 1000 mm Distance between columns 1650 mm Position accuracy < 0.02 mm Repeatebility < 0.008 mm The X / Y guides are cylinder rollers 2 / 2 The Z guide is flat guide X travel 2100 mm Y travel 1500 mm Z travel 1000 mm Rsdpfxetr E A Uj Agzjck X / Y / Z rapid speed 20 / 20 /15 m/min Feedrate 15 m/min Spindle speed 10000 rpm Tool holder type:SK50 Direct drive system No of speed ranges 2 Spindle power 22 kW ATC magazin 30-fold (arm type) Max tool length 400 mm Max tool dia 125 (215) mm Max tool weight 20 kg Floor requirements LxWxH = 6000 x 4600 x 4200 mm Weight 23500 kgs Accessories, features - CTS - Coolant tank - Chip conveyor - Angle head (manually adjustable) - Arm type tool changer - Lighting of working area - Washing gun - Manuals The machine is in very good and almost new condition. Still under power and ready to buy immediately.

Condition: good (used), Year of construction: 1997, Type / Model: BMC30 Control: Ultimax SSM Operating hours: 5,744 h Travel x-y-z: 760 - 460 - 610 mm Table: 1,130 x 500 mm Table clamping area: 1,000 x 400 mm Speed range: 80 to 8,000 rpm Spindle mount: SK40 Feed rates: 3 to 7,600 mm/min Rapid traverse: 7,600 mm/min Tool changer: 24 stations Power supply: 11 kW Accessories/equipment: Coolant system, external interface Rcodpfx Agsv I Dn Nszek Condition: Good Weight: Approx. 4.0 t Dimensions: 2,200 x 2,300 x 2,800 mm (without display)

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Rodjx I Ig Uopfx Agzjck Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Rcedpfx Agexuqh Sjzek Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 61029386, clamping force: 2,000 kN, screw diameter: 70 mm, Equipment: documentation/manual, KraussMaffei 200/1400 CX POL BMC injection molding machine for sale in very good condition. Few operating hours, manufactured in 2017, commissioned in 2018. MC6 control. For details, please contact us by email! Redpfx Aewz Iv Asgzsck Thank you!

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr Rcedpfot Rhb Iox Agzjk with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: excellent (used), Year of construction: 1993, - Gildemeister original pneumatic pick-up - Oscillating arm of resumption passage 25 - 1 detector for drill bit breakage - Bar drop exclusion cylinder - Balluff BMC 8 Rodekwcx Sjpfx Agzjck - Bar loader IEMCA PRA 52/31 P

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Rcodpsu Edp Sofx Agzok Paint finish light blue & light gray