Used Board Cutter for sale (6,563)

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide One additional cutter included. Price € 590 Podstpvt Topfx Ai Degr We can organise shipping if you require this service

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, input voltage: 1,200 V, Industrial paper rewinder and cutter KAMPF (KAMPF GmbH & Co., manufacturer Jagenberg-Gruppe, Germany) Technical data: • Manufacturer: KAMPF GmbH & Co., Maschinenfabrik, Wiehl (Germany) • Group: Jagenberg-Gruppe • Year of manufacture: 1989 • Serial number: 9791D • Machine type: industrial paper roll rewinder and cutter • Power supply: 3 × 400 V • Machine location: Papir – Novak s.r.o., Czech Republic Use of the machine: The machine is designed for rewinding and longitudinal cutting of roll materials, in particular: • paper, • kraft paper, • wrapping paper, • technical papers, • other similar strip materials. Machine components: • unwinding stand for the parent roll, • main rewinding and cutting unit, • guide and transport rollers, Pgjdpfxjztwuvs Ai Dor • winding shafts, • protective cover for the cutting section, • control panel, • mechanical tensioning using an Ortlinghaus clutch. Machine condition: • mechanically complete, • the machine was dismantled from operation and stored in a dry warehouse for a long time, • the unwinding stand is included, • the control panel is installed, • functionality has not been verified – the machine is untested, • it is sold in its current condition, • suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: refurbished (used), Year of construction: 2010, functionality: limited functionality, Alpina Swopper 330 litre Bowl Cutter Pgodpfx Ajykt Sgji Der Year 2010 Motor power 141 Kw Multispeed knife and bowl Noise cover Power up knife lid 6 x knives Unloader disc Tote bin loader Currently being refurbished New knife shaft bearings fitted Hydraulic rams being checked and new seals fitted Main motor being rewired, machine stripped out to clean. 6 x knife speeds with 2 x reverse knife speeds 4 x bowl speeds With machine manual and drawings

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Pedpfoyx I Duex Ai Djgr

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, type of input current: three-phase, workpiece weight (max.): 500 kg, input voltage: 380 V, travel distance X-axis: 3,650 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 150 mm, repeat accuracy: 0.02 mm, table length: 6,000 mm, table width: 2,000 mm, Shuttle SH-4020 – 5-axis abrasive waterjet cutting machine, year 2019 Pgjdpfx Aijzvdhno Djr Large-format 5-axis waterjet system for precision cutting of natural stone, engineered stone, ceramics, glass, composites, and metals. The machine has been in regular production use in a stone fabrication facility and is fully operational, available for inspection while powered on. Key Features Generous 3650 × 1900 mm cutting area – handles full slabs and large plates. 5-axis cutting head for bevels, chamfers, miters, and taper-compensated cuts. High-pressure intensifier pump, 37 kW, up to 380 MPa (55,000 psi). Repeatability ±0.02 mm. Table capacity: 500 kg workpiece weight. Cold cutting process – no heat-affected zone, no material distortion. Ready for immediate relocation; located in the EU with convenient transport options across Europe. Suitable for: stone and quartz fabrication, architectural elements, inlay and waterjet mosaics, glass and ceramic processing, sheet metal and composite cutting, and job-shop contract cutting.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI Psdpfexwtu Tjx Ai Dogr 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter Psdpfxjzvgk Ee Ai Djgr The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Pgedpfxozvvc Do Ai Dor Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. Pgedjzuw R Hepfx Ai Dsr The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW Pedpfx Aswqr Twsi Dsgr - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available Pedozhwvpspfx Ai Dsgr We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Pgjdpowqr Tdefx Ai Dor Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Pedpfx Aioztn Iyj Dogr Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: ready for operation (used), Ewag WS11 Pgsdpfx Aszwz Ubsi Djr

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Podpfelmnzqex Ai Dsgr

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Pgjdpfxezd Tg Aj Ai Djr Location: Nattheim.

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Pjdpfx Aijzpygyo Dsgr

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. Pgjdpfx Aiozmu I He Der This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between saw blades: 45 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Completely made of corrosion-resistant AISI 304 steel Two parallel saw blades Podpfxjzvv Rno Ai Djgr Fully mechanized wheels Adjustable speed of the side blade The machine comes from a business liquidation.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Podpfx Ajztplgoi Degr Cross magnet in the feed hopper!

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, Designed to perform high-precision slotting and die-cutting processes on cardboard sheets. Its semi-automatic system allows for a high degree of operator control. With a working length of 2800 mm, it is suitable for handling large parts, optimizing the manufacturing process of boxes and packaging. Pjdpfx Aszugtqji Dsgr Configuration: - Conveyor chain for indirect paper feeding - 40 mm lateral movement via gear transmission; replaceable and wear-resistant polyurethane rubber - Rollers with surface grinding, chrome plating, and precise alignment. Shaft cores made of 20# steel.

Year of construction: 2019, condition: good (used), functionality: fully functional, Yoco 1650E, ref. 3026 Year: 2019 Maximum sheet size: 1200x1680 mm Bottom feeder – cup feeder Mechanical side lay Psdpfozvfgrjx Ai Dogr Motorized pressure adjustment Stripping unit Batch delivery Caliper: E, B, C, EB, laminated board Available immediately

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel Pgodpsztn I Hsfx Ai Dsr – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Pgsdpfx Aijzudzfj Dor Inspection is welcome. We have other used machines available. Please feel free to contact us.

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Pjdpfx Ajzuxmisi Djgr